Mechanical engineering topic list of research papers
-
Experiment and simulation of launching process of a small-diameter steel cartridge case
Abstract In order to explore the rules of the deformation force during the launching of a small-diameter steel cartridge, the semi-closed bomb test method is used to test the greatest strains on chamber outer wall under the different chamber...
2014 / Han-dong Zhao, Jia-qing Xie, Zhi-peng Li, Hui-suo Zhang -
Investigation of Evaluation Criterion of Axial Wall Heat Conduction in Tube Laminar Flow and Heat Transfer
Abstract The effect of axial wall heat conduction in circular tube laminar flow and heat transfer has been investigated under constant temperature boundary conditions. Three-dimensional numerical simulations are performed with different wall...
2015 / Mei Lin, Liangbi Wang, Qiuwang Wang -
The Influence of the Mechanical Deformations on the Machining Accuracy of Complex Profiles on CNC Lathes
Abstract In this paper, the problem of accuracy control of machined complex profiles is investigated. Presented are schemes of the mechanical load of the cutting tool as a function of the current angle of the machined profile. A simple method for...
2015 / S. Koleva, M. Enchev, T. Szecsi -
Overview of automotive engine friction and reduction trends–Effects of surface, material, and lubricant-additive technologies2016 / Victor W. Wong, Simon C. Tung
-
Design and Iconic Brands2015 /
-
Extended Finite Element Numerical Analysis of Scale Effect in Notched Glass Fiber Reinforced Epoxy Composite2015 / Mohammed Y. Abdellah, Mohammad S. Alsoufi, Mohamed K. Hassan, Hamza A. Ghulman, Ahmed F. Mohamed
-
Experimental investigation and performance analysis of inertia properties measurement for heavy truck cab2015 / T. Zhu, F. Li
-
Electric Vehicle Routing Problem
Abstract This paper presents a general Electric Vehicle Routing Problem (EVRP) that finds the optimal routing strategy with minimal travel time cost and energy cost as well as number of EVs dispatched. This is the first EVRP model to consider the...
2016 / Jane Lin, Wei Zhou, Ouri Wolfson -
Selected Dynamic Problems of the Face Packing Seal
Abstract This paper analyzes the statics and dynamics of face packing seals, in which one of the sealing rings is made of elastic sealant. The study involved analyzing the axial vibration of the flexible ring for two configurations of its housing in ...
2016 / Volodymyr Martsynkowskyy, Czeslaw Kundera, Sergii Gudkov -
Dynamics modeling of a semi-submersible autonomous underwater vehicle with a towfish towed by a cable2015 / Jinmo Park, Nakwan Kim
-
Investigation on the wake evolution of contra-rotating propeller using RANS computation and SPIV measurement2015 / Kwang-Jun Paik, Seunghyun Hwang, Jaekwon Jung, Taegu Lee, Yeong-Yeon Lee, et al.
-
A Review of Technologies and Evaluation Softwares for Distributed Energy Source System
Abstract This study reviews the technologies and evaluation softwares for the Distributed Energy Resource System (DERs), which is considered as a realistic and economical way to realize the clean utilization of energy. For the the technologies of...
2016 / Yanna Gao, Xi Meng, Weijun Gao, Enshen Long -
Effect of transverse pitch on forced convective heat transfer over single row cylinder2015 / Kaprawi Sahim
-
Formal Modelling of Manual Work Processes for the Application of Industrial Service Robotics
Abstract The gap between technical capability and practical application of service robotics increased constantly within the last years, especially regarding small and medium-sized enterprises. In order to facilitate the transfer of knowledge to the...
2016 / André Hengstebeck, Kirsten Weisner, Maike Klöckner, Jochen Deuse, Bernd Kuhlenkötter, et al. -
Numerical study on aerodynamics of banked wing in ground effect2016 / Qing Jia, Wei Yang, Zhigang Yang
-
Mechanisms of direct detonation initiation via thermal explosion of radiatively heated gas-particles layer
Abstract Conceptual approach of detonation wave direct initiation by external radiative heating of microparticles locally suspended in flammable gaseous mixture is proposed. Combustion waves and detonation initiation mechanisms in the congestion...
2015 / V.P. Efremov, M.F. Ivanov, A.D. Kiverin, I.S. Yakovenko -
Automatic topological structural synthesis algorithm of planar simple joint kinematic chains2016 / Y. Zou, P. He, Y. Pei
-
A study of particles penetration in sieving process on a linear vibration screen2015 / Zhanfu Li, Xin Tong
-
Observation of Water-Droplet Impacts with Velocities of O (10 m/s) and Subsequent Flow Field2015 / Y. Tatekura, T. Fujikawa, Y. Jinbo, T. Sanada, K. Kobayashi, et al.
-
Numerical Investigation of Counter Flow Plate Heat Exchanger
Abstract Flow and heat transfer in a recuperative counter flow plate air-to-air heat exchanger were investigated numerically using Fluent software. It was employed previously developed methods to generate a computational mesh and assumed a zero...
2015 / Václav Dvořák, Tomáš Vít