Mechanical engineering topic list of research papers
-
A definition of near-critical region based on heat capacity variation in transcritical heat exchangers2011 / Marian Trela, Roman Kwidziński, Dariusz Butrymowicz
-
Analysis of cyclic combustion of the coal-water suspension2011 / Agnieszka Kijo-Kleczkowska
-
The Researches of Effectiveness of Road Restraint Systems2010 / Wacław Borkowski, Zdzisław Hryciów, Piotr Rybak, Józef Wysocki
-
Pressure estimation from single-snapshot tomographic PIV in a turbulent boundary layer2016 / Jan F. G. Schneiders, Stefan Pröbsting, Richard P. Dwight, Bas W. van Oudheusden, Fulvio Scarano
-
Investigation on the flow control of micro-vanes on a supersonic spinning projectile
Abstract Studies have shown that micro-wedge vortex generators (MVG) can effectively control the flow separation of supersonic boundary layer. In order to improve the flight stability of spinning projectile, the original standard 155 mm projectile...
2016 / Jie Ma, Zhi-hua Chen, Zhen-gui Huang, Jian-guo Gao, Qiang Zhao -
Classification and Kinematic Equivalents of Contact Types for Fingertip-Based Robot Hand Manipulation2016 / Nicolas Rojas, Aaron M. Dollar
-
Research on the horizontal curve's radius under coupling effects of uneven adhesion coefficient and crosswind
Abstract In order to study the effects of uneven adhesion coefficient and crosswind on alignment design indexes, a six-axle semi-trailer is selected as the typical vehicle model to investigate the effects of uneven adhesion coefficient caused by...
2015 / Min Zhang, Guilong Hua, Chi Zhang, Jennifer Ogle -
Effect of Rotation Speed of a Rotary Thermal Wheel on Ventilation Supply Rates of Wind Tower System
Abstract This study explores the integration of a rotary thermal wheel into a wind tower system, specifically the effect of the rotation speed on the ventilation rate and heat recovery. Wind towers are capable of supplying recommended levels of...
2015 / Dominic O’Connor, John Calautit, Ben Richard Hughes -
Global Mode Analysis in the L/T Transition of a Hypersonic Boundary Layer Forced by Wall Injection
Abstract The laminar-turbulent transition of a Mach 4.6 flat-plate boundary layer forced by wall injection is investigated using Implicit Large Eddy Simulation. The boundary layer edge conditions match those of a 1:3 scale hypersonic vehicle...
2015 / Thierry André, Evgeniy Orlik, Antoine Durant, Ivan Fedioun -
Three-dimensional unsteady natural convection and entropy generation in an inclined cubical trapezoidal cavity with an isothermal bottom wall
Abstract Numerical computation of unsteady laminar three-dimensional natural convection and entropy generation in an inclined cubical trapezoidal air-filled cavity is performed for the first time in this work. The vertical right and left sidewalls...
2016 / Ahmed Kadhim Hussein, Kolsi Lioua, Ramesh Chand, S. Sivasankaran, Rasoul Nikbakhti, et al. -
Modeling by finite element methods of impact of erosion on frequency of normal modes of l-0 blade2012 / Łukasz Gołuński, Bolesław Augustyniak
-
The Aging-Processes-Based Forecasting of Service Lives of Selected Items of Aircraft Equipment2008 / Józef Żurek, Mariusz Zieja
-
Near-optimal supervisory control of flexible manufacturing systems using divide-and-conquer iterative method2016 / M. Zhao, M. Uzam, Y. Hou
-
A hybrid procedure to identify the optimal stiffness coefficients of elastically restrained beams2015 / Tiago Silva, Maria Loja, Nuno Maia, Joaquim Barbosa
-
Thermomechanical CSM analysis of a superheater tube in transient state2012 / Dawid Taler, Paweł Madejski
-
The use of simulation models for the design of friction shifting elements used in planetary transmissions2013 / Jaroslav Pitoňák, Miroslav Galbavý
-
A methodology for gear fatigue tests and their evaluation (part 2)2013 / Petr Maršálek, Vladimír Moravec
-
Evaluating Pavement Cracks with Bidimensional Empirical Mode Decomposition2008 / Albert Ayenu-Prah, Nii Attoh-Okine
-
Underwater striling engine design with modified one-dimensional model2015 / Daijin Li, Kan Qin, Kai Luo
-
Analysis of the Influence of Blade's Machining Error on Aerodynamic Performance of Impeller Based on NUMECA
Abstract As the core component of centrifugal compressor impeller, blade's performance quality has a crucial influence on the structure strength and aerodynamic performance of the compressor. In this paper, by using NUMECA software to solve the...
2015 / Tao Wu, Yanlong Cao, Jiangxin Yang