Mechanical engineering topic list of research papers
-
Characterization of Energy Efficient Vapor Compression Cycle Prototype with a Linear Compressor
Abstract In this paper, an experimental vapour compression cycle (VCC) prototype is developed. The VCC system composes of a high performance 300W linear compressor with variable capacity control, expansion valve, air-cooled condenser, and two...
2015 / Mahmoud A. Alzoubi, TieJun Zhang -
Theory of Economic Life Prediction and Reliability Assessment of Aircraft Structures
Abstract The theory of economic life prediction and reliability assessment of aircraft structures has a significant effect on safety of aircraft structures. It is based on the two-stage theory of fatigue process and can guarantee the safety and...
2011 / Chuliang YAN, Kege LIU -
A New Measurement Method for Unbalanced Moments in a Two-axis Gimbaled Seeker
Abstract This article presents a novel method to measure unbalanced moments in a two-axis gimbaled seeker commonly believed to seviously influence the tracking accuracy and stabilizing capability. This method enables individual measurement of...
2010 / Yu Shuang, Zhao Yanzheng -
Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach
Abstract This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, ...
2011 / Huifeng LI, Ping LIN, Dajun XU -
Agile Scheduling and Control for Industrial Product-service Systems
Abstract An Industrial Product-Service System (IPS2) is characterized by a high integration of product and service shares. This implies that the providing company develops an IPS2 consisting of product share, e.g. a highly complex precision machine...
2013 / H. Meier, E. Uhlmann, N. Raue, T. Dorka -
Development and Validation of a “Crank-angle” Model of an Automotive Turbocharged Engine for HiL Applications
Abstract Management and diagnostic functions are playing a key role in the improvement of engines performance and in the reduction of fuel consumption and pollutant emissions especially in automotive applications. As widely documented in the open...
2014 / Paolo Casoli, Agostino Gambarotta, Nicola Pompini, Ugo Caiazzo, Enrico Lanfranco, et al. -
Fuzzy Reliability Estimation for Cutting Tools
Abstract A cutting tool is an important part of machine tools and its reliability influences the total manufacturing effectiveness and stability of machine tools. The paper presents the application of state space model in the cutting tool...
2014 / Shujie Liu, Hongchao Zhang, Chao Li, Huitian Lu, YaWei Hu -
Numerical and experimental analysis for exhaust heat exchangers in automobile thermoelectric generators
Abstract Ideal heat exchangers recover as much heat as possible from an engine exhaust at the cost of an acceptable pressure drop. They provide primary heat for a thermoelectric generator (TEG), and their capacity and efficiency is dependent on the...
2014 / Shengqiang Bai, Hongliang Lu, Ting Wu, Xianglin Yin, Xun Shi, et al. -
Design and Optimization of 3D Radial Slot Grain Configuration
Abstract Upper stage solid rocket motors (SRMS) for launch vehicles require a highly efficient propulsion system. Grain design proves to be vital in terms of minimizing inert mass by adopting a high volumetric efficiency with minimum possible...
2010 / Ali Kamran, Liang Guozhu -
An Ideal Mating Surface Method Used for Tolerance Analysis of Mechanical System Under Loading
Abstract A method to substitute the actual mating surfaces into an ideal mating surfaces is proposed in this paper. A unit normal vector is used to express their position and orientation. To simulate the variation propagation in assemble process, an ...
2013 / Junkang Guo, Jun Hong, Yong Wang, Zhaohui Yang -
Development of a Multi-component based Methodology for the Simulation of Reacting High Injection Pressure Diesel Sprays
Abstract Modern Diesel engines are attractive for fuel economy and performances but they are suffering from increasingly strict emission standards. Therefore the investigation of the injection and combustion processes are mandatory. This paper...
2014 / Simone Malaguti, Giuseppe Bagli, Stefano Piccinini, Giuseppe Cantore -
Non-isothermal Mold Filling and Curing Simulation for Resin Transfer Molding
Abstract A numerical model of 2. 5D non-isothermal resin transfer molding simulation is developed for thin part based on the control volume/finite element method. The non-uniform temperature distribution and the heat generation during the filling...
2011 / Ren-liang CHEN, Bing GUI, Ming-cheng LI, Zhi-yong LIANG -
DynaView: General Dynamic Visualization Model for SHM2012 / Peng Sun, Ziyan Wu, Qingyi Hua, Zhanhuai Li, Muning Kang
-
An Intelligent Diagnosis Method for Rotating Machinery Using Least Squares Mapping and a Fuzzy Neural Network2012 / Ke Li, Peng Chen, Shiming Wang
-
Optimization of a Fuzzy-Logic-Control-Based Five-Stage Battery Charger Using a Fuzzy-Based Taguchi Method2013 / Chun-Liang Liu, Yi-Shun Chiu, Yi-Hua Liu, Yeh-Hsiang Ho, Shu-Syuan Huang
-
Influence of Plane-parallel Finishing Trajectories to the Roughness Obtained by Milling of Spherical Surfaces
Abstract The purpose of the present paper is to determine a mathematical model in order to evaluate theoretically the roughness of a spherical surface finished with a torodial end mill. The parameters that influence the theoretical value of the...
2014 / Paul Cheţan, Vasile Boloş, Alexandru Pozdîrcă -
Study on Safety Distance Model of Fleet based on Vehicle Communication
Abstract The Safety Distance Model (SDM) is a key component of the collision prevention system. The SDM research rarely considers vehicle fleet as the research target, as the traditional SDMs only focus on the communication between two vehicles....
2013 / Hua Wang, Shen Zhang, Wei Quan, Xin Liu -
Heat Transfer and Pressure Drop Characteristics in Straight Microchannel of Printed Circuit Heat Exchangers2015 / Jang-Won Seo, Yoon-Ho Kim, Dongseon Kim, Young-Don Choi, Kyu-Jung Lee
-
A Velocity-Based Impedance Control System for a Low Impact Docking Mechanism (LIDM)2014 / Chuanzhi Chen, Hong Nie, Jinbao Chen, Xiaotao Wang
-
Depth Camera-Based 3D Hand Gesture Controls with Immersive Tactile Feedback for Natural Mid-Air Gesture Interactions2015 / Kwangtaek Kim, Joongrock Kim, Jaesung Choi, Junghyun Kim, Sangyoun Lee