Mechanical engineering topic list of research papers
-
Modeling Truck Driveline Dynamic Loads at Differential Locking Unit Engagement
Abstract The paper shows the results of the truck driveline dynamic loading processes made with an imitation modeling approach. The developed mathematical model of a vehicle motion includes the functioning features of all principal automotive...
2015 / A.V. Keller, V.A. Gorelov, V.V. Anchukov -
Performance and emission characteristics of compression ignition engine operating with false flax biodiesel and butanol blends2016 / M. A. Akar
-
Masonry structural damage and failure under blasting vibration2016 / S. Chen, Z. Zhang
-
The analytical design method of railway route’s main directions intersection area2016 / Wladysław Koc
-
A method for regulating strong nonlinear vibration energy of the flexible arm2015 / Y. Bian, M. Wang, Z. Gao, B. Yuan, M. Fan
-
Numerical Simulation of Turbulence Flows in Shear Layer2014 / S.V. Fortova
-
The Influence of Rotor Unbalance on Turbocharger Rotor Dynamics2016 / Jiří Knotek, Pavel Novotný, Ondřej Maršálek, Peter Raffai, Jozef Dlugoš
-
Application of orthogonal array technique and particle swarm optimization approach in surface roughness modification when face milling AISI1045 steel parts2015 / Masoud Azadi Moghaddam, Farhad Kolahan
-
Development of a hybrid multi-scale simulation approach for spray processes2015 / L. Zhou, J. Xia, J. Shinjo, A. Cairns, L. Cruff, et al.
-
Overview of the State of Robotic Machining: Current Situation and Future Potential
Abstract Nowadays industrial robots are an appropriate technology for developing flexible and reconfigurable manufacturing systems which contribute to perform automatically operation such as milling, cutting, drilling, grinding, deburring and...
2015 / I. Iglesias, M.A. Sebastián, J.E. Ares -
Computational fluid dynamics simulations and tests for improving industrial-grade gas mask canisters2015 / Y.-C. Su, C.-C. Li
-
Hydraulic fracturing and its peculiarities2014 / Stefano Secchi, Bernhard A Schrefler
-
Study on Real-time Extension Fault Detection for a XXY Stage by using Chaos Synchronization
Abstract This paper proposes the chaos synchronization-based XXY stage real-time extension fault detection; the main characteristic signal is extracted by filtering from the microvibration of stage. The chaos synchronization systems are used to...
2015 / Chin-Tsung Hsieh, Her-Terng Yau, Huo-Cheng Lin -
Steady-state Analysis on Thermally Driven Adsorption Air-conditioning System for Agricultural Greenhouses
Abstract In the present study, water vapor adsorption onto silica-gel, activated carbon powder (ACP) and activated carbon fiber (ACF) has been experimentally measured at 20°C, 30°C and 50°C. The adsorption data is fitted with Guggenheim–Anderson–De...
2015 / Muhammad Sultan, Takahiko Miyazaki, Bidyut B. Saha, Shigeru Koyama, Valeriy S. Maisotsenko -
Study on Influence of Electrode Material on Hole Drilling in Micro-EDM
Abstract Micro-EDM technology is widely used in micro hole machining for its small force and high precision. However, the slow machining rate and large tool wear are the two major problems. In this research, machining with different electrode...
2016 / Yulei Fu, Takumu Miyamoto, Wataru Natsu, Wansheng Zhao, Zuyuan Yu -
Geometric Product Specification of Gears: The GeoSpelling Perspective
Abstract Gears as the key transmission parts of machineries are widely used in mechanical and aeronautical fields. GeoSpelling, a framework standardized as ISO 17450-2005 supported tolerancing process by a set of concepts and mathematical...
2015 / Min Zhang, ZhaoYao Shi, Luc Mathieu, Anwer Nabil, Jianxin Yang -
Study of Ultrasonic Machining by Longitudinal-torsional Vibration for Processing Brittle Materials-observation of Machining Marks
Abstract The ultrasonic machining is a processing method using both the ultrasonic vibration of the tool horn and abrasive slurry. We studied a new ultrasonic machining method using ultrasonic complex vibration caused by the longitudinal and...
2015 / Takuya Asami, Hikaru Miura -
On the Critical Points of Vertical Vibration in a Railway Vehicle2015 / Mădălina Dumitriu
-
Selected Problems Of Transmission Wear Of The Mi-24 Helicopter2016 / Andrzej Gębura, Krzysztof Zientalski
-
Vibration-based damage detection for a composite helicopter main rotor blade
Abstract This work presents experimental results of two damage detection techniques based on modal properties, with the application on a full-size composite helicopter main rotor blade. The damage detection methods used in this study are the...
2016 / F.L.M. dos Santos, B. Peeters, H. Van der Auweraer, L.C.S. Goes, W. Desmet