Mechanical engineering topic list of research papers
-
Thermal conductivity prediction of closed-cell aluminum alloy considering micropore effect2015 / D. Zhang, J. Wang
-
Development of Kinetics Models in Each Zone of a 10kg/hr Downdraft Gasifier using Computational Fluid Dynamics
Abstract In order to optimize the operating conditions of a downdraft gasification process, mathematical models are commonly used to reduce the expenditure occurring during the experimental work. This study aims to develop a kinetics model to...
2015 / Pubet Meenaroch, Somrat Kerdsuwan, Krongkaew Laohalidanond -
Research on the response improvement of optical actuation based on lead lanthanum zirconate titanate ceramics2015 / X. Wang, J. Huang, Y. Tang
-
Autonomous Object Manipulation Using a Soft Planar Grasping Manipulator2015 / Robert K. Katzschmann, Andrew D. Marchese, Daniela Rus
-
Modelling Constraints in the Conceptual Design Process with TRIZ and F3
Abstract Constraint stimulates creativity and is the key to understanding complexity. The benefit of the constraint-based problem is that it can spark ideas for new knowledge, new possibilities, and new opportunities. In every design, boundaries,...
2016 / Khairul Manami Kamarudin, Keith Ridgway, Mohd Roshdi Hassan -
Model of 5R Spatial Linkage in the Geometry of Tori2015 / T. Bil, Z. Budniak
-
Multi Body Analysis Of A Turbocharger Supported By A Fully Floating Ring Bearing2015 / Jiří Knotek, Pavel Novotný, Ondřej Maršálek, Peter Raffai
-
Prediction of Cutting Force in 3-Axis CNC Milling Machines Based on Voxelization Framework for Digital Manufacturing
Abstract A new digital-based model is presented for the prediction cutting forces in 3-axis CNC milling of surfaces. The model uses an algorithm to detect the work-piece/cutter intersection domain automatically for given cutter location (CL), cutter ...
2015 / Omid Yousefian, Joshua A. Tarbutton -
Interest of Equivalent Damage Methods for Railway Equipment Qualification to Vibrations
Abstract Fatigue, induced by vibrations of supporting structures, is one of the major cause of mechanical failures of equipment mounted on vehicles and on machines. Account of vibration excitation should therefore be considered with care when...
2015 / A. Coulon, B. Nélain, N. Vincent -
Vibration Analysis and Energy Efficiency in Interrupted Face Milling Processes
Abstract The planning of a face milling process determines how the milled part is produced: an incorrect or incomplete planning process will result in a loss of productivity. This paper proposes that loss of productivity be avoided by including...
2015 / Hugo M.B. de Carvalho, Jefferson de Oliveira Gomes, Marco Antonio Schmidt, Vitor L.C. Brandão -
Real Time Monitoring of the CNC Process in a Production Environment- the Data Collection & Analysis Phase
Abstract For many years there has been considerable research from both an academic and industrial perspective into the monitoring and control of CNC machining processes, and progress has been well documented. It is widely acknowledged within the...
2016 / Jonathan Downey, Denis O'Sullivan, Miroslaw Nejmen, Sebastian Bombinski, Paul O’Leary, et al. -
Experimental Investigation Of Biogas-Biodiesel Dual Fuel Combustion In A Diesel Engine2015 / D. K. Ramesha, Adhiviraj Singh Bangari, Chirag P. Rathod, Chaitanya R. Samartha
-
Identification of Clearance and Contact Stiffness in a Simplified Barrel-Cradle Structure of Artillery System2015 / B. Li, S. Quan, W. Jin, L. Han, J. Liu, et al.
-
Parking Survey Made Efficient in Intelligent Parking Systems
Abstract The emerging of intelligent sensors results in the emergence and development of intelligent parking. Parking survey is one of the most important things for the parking managers and corresponding planners or researchers. We discuss the...
2016 / Na Chen, Lu Wang, Limin Jia, Honghui Dong, Haijian Li -
Selection for optimal exit ramp type on Floridas freeways based on operational analysis2016 / C. Wang, L. Lu, J. Lu, T. Wang
-
Multi-objective optimization of an on-road bicycle frame by uniform design and compromise programming2016 / Y.-C. Cheng, C.-K. Lee, M.-T. Tsai
-
Burr Controlling in Micro Milling with Supporting Material Method
Abstract A novel method is presented in order to prevent burrs formation in micro milling process. Burrs description and the minimum cutting depth are discussed firstly. Then burr formation mechanism is analyzed and it is found that negative shear...
2015 / Zhaojun Kou, Yi Wan, Yukui Cai, Xichang Liang, Zhanqiang Liu -
Study on Traffic Flow Patterns Identification of Single Intersection Intelligent Signal Control
Abstract To improve the level of intersection traffic management, we research traffic flow patterns of intersections. Based on Fuzzy C-Means clustering algorithm, this paper finished quality evaluating on cluster center value and optimizing the...
2016 / Yun Zhu, Ningbo Gao, Jianyu Wang, Chen Liu -
Design Management2011 / Ľubica Knošková
-
The effect of tyre and rider properties on the stability of a bicycle2015 / V. E. Bulsink, A. Doria, D. van de Belt, B. Koopman