Mechanical engineering topic list of research papers
-
Study on lattice Boltzmann method/large eddy simulation and its application at high Reynolds number flow2015 / H. Si, Y. Shi
-
Effect of cutting parameters on machinability characteristics in milling of magnesium alloy with carbide tool2016 / K. Shi, D. Zhang, J. Ren, C. Yao, X. Huang
-
A Numerical Model to Study the Nonlinear and Unsteady Aerodynamics of Bioinspired Morphing-Wing Concepts2015 / Marcos L. Verstraete, Sergio Preidikman, Bruno A. Roccia, Dean T. Mook
-
Effect Of Turbulence Modelling In Numerical Analysis Of Melting Process In An Induction Furnace2015 / P. Buliński, J. Smołka, S. Golak, R. Przyłucki, L. Blacha, et al.
-
Approximate natural vibration analysis of rectangular plates with openings using assumed mode method2015 / Dae Seung Cho, Nikola Vladimir, Tae MuK Choi
-
A model-based approach for sustainability and value assessment in the aerospace value chain2015 / M. Bertoni, S. Hallstedt, O. Isaksson
-
Longitudinal static stability requirements for wing in ground effect vehicle2015 / Wei Yang, Zhigang Yang, Maurizio Collu
-
Numerical Analysis of Fluid Motion Inside Partially Filled Container Which is Moving in Unsteady Way2016 / Magdalena Sowińska, Janusz Piechna
-
Experimental mode shape determination of a cantilevered hydrofoil under different flow conditions2015 / O. De La Torre, X. Escaler, E. Egusquiza, M. Farhat
-
The influence of the form of condensation nucleus on the formation and propagation of acid precipitation near operating TPS2015 / D.V. Gvozdyakov, V.E. Gubin
-
Study of the Ultrasonic Molding Process Parameters for Manufacturing Polypropylene Parts
Abstract Applications of polymeric materials are becoming a huge opportunity to innovate in new manufacturing technologies. In this sense Ultrasonic Molding (USM) process is an innovative technology to produce polymeric micro parts. Here, ultrasonic ...
2015 / P. Negre, J. Grabalosa, I. Ferrer, J. Ciurana, A. Elías-Zúñiga, et al. -
Synchronization investigation of vibration system of two co-rotating rotor with energy balance method2016 / Y. Hou, P. Fang, Y. Nan, M. Du
-
The energy conservation optimization design of the cutting edges of the twist drill based on Dijkstra’s algorithm2015 / Liangshan Xiong, Bin Li
-
A Headway Control Algorithm for ACC Vehicles with the Compensation of the Preceding Vehicle Acceleration
Abstract A headway control algorithm with the compensation of the preceding vehicle acceleration is proposed. Multi performances such as driving safety, passenger comfort and energy economy are considered to imitate car-following features of skilled ...
2016 / Gao Zhenhai, Yan Wei -
Vehicle Control Strategies Analysis Based on PID and Fuzzy Logic Control
Abstract Two degrees of freedom vehicle dynamic model is established. Based on theories of PID control and fuzzy logic control, controller of vehicle stability is designed by using the method of direct yaw moment control and the different control...
2016 / Hui-min Li, Xiao-bo Wang, Shang-bin Song, Hao Li -
Load assessment and analysis of impacts in multibody systems2015 / Francisco González, József Kövecses, Josep M. Font-Llagunes
-
Application of Acoustic Emission in Diagnostic of Bearing Faults within a Helicopter Gearbox
Abstract Acoustics Emissions (AE) technology has emerged as a promising diagnostic approach. AE was originally developed for non-destructive testing of static structures, however, in recent times its application has been extended to health...
2015 / Faris Elasha, Matthew Greaves, David Mba, Abdulmajid Addali -
Research on Risk Assessment and Safety Management of Highway Maintenance Project
Abstract In order to evaluate the highway maintenance enterprise synthetically and quantificationally, a safety evaluation indicator is established according to the impact conservation production safety factors in this paper. It can help the...
2016 / Jianyou Zhao, Xiaoyu Fu, Yunjiao Zhang -
Dual-Bezier path smoothing and interpolation for five-axis linear tool path in workpiece coordinate system2015 / Y. Jin, Q. Bi, Y. Wang
-
Quantifying the Role of Part Design Complexity in Using 3D Sand Printing for Molds and Cores2016 / Eyad S. Almaghariz, Brett P. Conner, Lukas Lenner, Ram Gullapalli, Guha P. Manogharan, et al.