Mechanical engineering topic list of research papers
-
Sintering of HDH Ti Powder2015 / Jaroslav Kováčik, Štefan Emmer
-
CFD Analysis of NOx Emissions of a Natural Gas Lean Premixed Burner for Heavy Duty Gas Turbine
Abstract The present work presents a numerical analysis of a low NOx partially premixed burner for heavy duty gas turbine. The first part of the paper is focused on the study of the premixing process inside the burner using standard RANS CFD...
2015 / A. Andreini, M. Cerutti, B. Facchini, A. Innocenti -
A new extended Reynolds equation for gas bearing lubrication based on the method of moments2016 / Xiao-Jun Gu, Haijun Zhang, David R. Emerson
-
Does Shear Thickening Occur in Semisolid Metals?2016 / Helen V. Atkinson, Veronique Favier
-
Challenges and future perspectives for the life cycle of manufacturing networks in the mass customisation era2016 / D. Mourtzis
-
GRASP for sequencing mixed models in an assembly line with work overload, useless time and production regularity2015 / Joaquín Bautista, Rocío Alfaro-Pozo, Cristina Batalla-García
-
Experimental investigation of a diesel engine with methyl ester of mango seed oil and diesel blends
Abstract Petroleum based fuels worldwide have not only resulted in the rapid depletion of conventional energy sources, but have also caused severe air pollution. The search for an alternate fuel has led to many findings due to which a wide variety...
2015 / K. Vijayaraj, A.P. Sathiyagnanam -
Performance Analysis of a Producer Gas-fuelled Heavy-duty SI Engine at Full-load Operation
Abstract Biomass gasification converts a solid fuel into a gaseous mixture (syngas or producer gas) which can be burnt in reciprocating internal combustion engines (ICEs) to produce electrical power. A wide variety of bio-residues can be processed...
2015 / Paolo Gobbato, Massimo Masi, Marianna Benetti -
A Numerical Investigation on the Potentials of Water Injection to Increase Knock Resistance and Reduce Fuel Consumption in Highly Downsized GDI Engines
Abstract 3D CFD analyses are used to analyse the effects of port-injection of water in a high performance turbocharged GDI engine. Particularly, water injection is adopted to replace mixture enrichment while preserving, if not improving, indicated...
2015 / Fabio Berni, Sebastiano Breda, Mattia Lugli, Giuseppe Cantore -
H∞ loop shaping for the torque-vectoring control of electric vehicles: Theoretical design and experimental assessment
Abstract This paper presents an H∞ torque-vectoring control formulation for a fully electric vehicle with four individually controlled electric motor drives. The design of the controller based on loop shaping and a state observer configuration is...
2016 / Qian Lu, Aldo Sorniotti, Patrick Gruber, Johan Theunissen, Jasper De Smet -
Enabling an Industrial Robot for Metal Cutting Operations
Abstract This paper focuses on a cost-effective manufacturing of large frame parts for aerospace industries with an industrial robot. The main challenge is the low stiffness of a serial kinematic, resulting in positioning errors due to gravity and...
2015 / Berend Denkena, Thomas Lepper -
Vehicle Speed Prediction from Yaw Marks Using Photogrammetry of Image of Traffic Accident Scene
Abstract This paper deals with the problem of a vehicle speed prediction from tire yaw marks. In forensic science, the evidences from accident scene in most cases are the main information preparing the accident report. Analysis of tire yaw marks...
2016 / Vidas Žuraulis, Loreta Levulytė, Edgar Sokolovskij -
Optimization as an Innovative Design Approach to Improve the Performances and the Functionalities of Mechatronic Devices
Abstract The economic context, more frequent needs and increasingly more requirements expressed by customers imply to design more complex products but using less time-consuming approaches. New products are currently integrating technologies from...
2015 / Didier Casner, Rémy Houssin, Jean Renaud, Dominique Knittel -
Capability Coordination in Automobile Logistics Service Supply Chain Based on Reliability
Abstract The paper builds a two-stage automobile Logistics Service Supply Chain (LSSC). The Logistics Service Integrator (LSI) is dominant. It integrates Functional Logistics Service Provider (FLSP). Considering the feature of non-storage and...
2016 / Meiling He, Junping Xie, Xiaohui Wu, Qifan Hu, Yu Dai -
Analytical Model and Experimental Validation of Single Turn, Axi-symmetric Coil for Electromagnetic Forming and Welding
Abstract Lightweight structures and assemblies formed and welded electromagnetically are widely used in various industries such as automotive, aerospace and electronics. One of the key factors in magnetic pulsed welding which causes the occurrence...
2015 / Ali Nassiri, Chris Campbell, Greg Chini, Brad Kinsey -
Reverse Engineering Technology in Redesign Process Ceramics: Application for CNN Plate
Abstract PT. Doulton Indonesia is a manufacturing ceramics tableware industry for international brand,and now developing a Low Sag body as a new materials. Low Sag body have 2 objectives to efficiency materials and setter. The problem of this...
2015 / Paulus Wisnu Anggoro, Baju Bawono, Ivan Sujatmiko -
Linear stability analysis of supersonic axisymmetric jets
Abstract Stabilities of supersonic jets are examined with different velocities, momentum thicknesses, and core temperatures. Amplification rates of instability waves at inlet are evaluated by linear stability theory (LST). It is found that increased ...
2014 / Zhenhua Wan, Haihua Yang, Lin Zhou, Dejun Sun -
Stick, partial slip and sliding in the plane strain micro contact of two elastic bodies2014 / G. G. Adams
-
Self-starting aerodynamics analysis of vertical axis wind turbine2015 / J. Zhu, H. Huang, H. Shen
-
Preparation and characterization of mechanical properties of foam glass for artificial floating island carrier2015 / C. Zhai, Y. Zhong, Z. Li, X. Wang, L. Zhao, et al.