Mechanical engineering topic list of research papers
-
The analysis of the calculation process related to labyrinth sealing with extraction2014 / D. Joachimiak, M. Joachimiak, P. Krzyślak
-
Modelling the Effects of Concentration of Solid Nanoparticles in Liquid Feedstock Injection on High Velocity Suspension Flame Spray Process2016 / Mahrukh Mahrukh, Arvind Kumar, Sai Gu, Spyros Kamnis, Gozali Ebrahim
-
The effects of hydrous ethanol gasoline on combustion and emission characteristics of a port injection gasoline engine
Abstract Comparative experiments were conducted on a port injection gasoline engine fueled with hydrous ethanol gasoline (E10W), ethanol gasoline (E10) and pure gasoline (E0). The effects of the engine loads and the additions of ethanol and water on ...
2015 / Xiaochen Wang, Zhenbin Chen, Jimin Ni, Saiwu Liu, Haijie Zhou -
Stability and economy analysis based on computational fluid dynamics and field testing of hybrid-driven underwater glider with the water quality sensor in Danjiangkou Reservoir2015 / C. Li, Y. Wang, Z. Wu
-
Comparative study on aerodynamic heating under perfect and nonequilibrium hypersonic flows2016 / Qiu Wang, JinPing Li, Wei Zhao, ZongLin Jiang
-
Modeling on thermally induced coupled micro-motions of satellite with complex flexible appendages2015 / Z. Zhou, Z. Liu, G. Qu
-
Effects of dot-type adhesive and yarn float on shear stiffness of laminated fabric with interlining2015 / K. Kim, M. Takatera
-
Improvement study for the dry-low-NOx hydrogen micromix combustion technology
Abstract The dry-low-NOx (DLN) micromix combustion principle is developed for the low emission combustion of hydrogen in an industrial gas turbine APU GTCP 36-300. The further decrease of NOx emissions along a wider operation range with pure...
2015 / A. Haj Ayed, K. Kusterer, H.H.-W. Funke, J. Keinz, C. Striegan, et al. -
Adaptive Huber-Based Filter for Hypersonic Cruise Vehicle Navigation2014 / Rong Wang, Zhi Xiong, Jianye Liu, Lina Zhong
-
Force characteristic of a magnetic actuator for separable electric connector based on conical airgap2015 / Y. Li, T. Cheng, D. Xuan, Y. Shen
-
Nonlinear dynamical model of an automotive dual mass flywheel2015 / L. Chen, R. Zeng, Z. Jiang
-
On the instability of a modified cup-burner flame in the infrared spectral region
Summary This study describes the modification of a standardised cup-burner apparatus. The replacement of the original glass chimney is performed by shielding a nitrogen co-flow enabled measurement at a wavelength of 3.9μm. This modification,...
2015 / Petr Bitala, Václav Nevrlý, Michal Střižík, Eva Grigorová, Zdeněk Zelinger, et al. -
Research on the aerodynamic characteristics of a lift drag hybrid vertical axis wind turbine2016 / X. Sun, Y. Chen, Y. Cao, G. Wu, Z. Zheng, et al.
-
Soft Sensing Method Of LS-SVM Using Temperature Time Series For Gas Flow Measurements2015 / Weiqing Xu, Zichuan Fan, Maolin Cai, Yan Shi, Xiaomeng Tong, et al.
-
Research in Vehicles With Thermal Energy Recovery Systems
Abstract This feasibility report presents results in the thermal energy recovery systems (TERS) investigation, and the possibility of introducing them to production vehicles as subsystems. This prospective new technology should reduce dependence on...
2015 / Andrew Royale, Milan Simic -
The Influence Of The Rare Earth Metals Modification On The Fracture Toughness Of G17CrMo5-5 Cast Steel At Low Temperatures2015 / I. Dzioba, J. Kasińska, R. Pała
-
Effect of Injection Timing & Split Injection on Different Piston Bowl Configuration in a DI Diesel Engine
Abstract The engine performance is generally governed by various parameters like peak pressure, static temperature, heat release rate, knocks emission, etc. However, these parameters are intern influenced significantly by varying the swirl ratio,...
2015 / Santhosh kumar Gugulothu, K. Hema Chandra Reddy -
Gas Turbine Assessment for Air Management of Pressurized SOFC/GT Hybrid Systems2007 / Alberto Traverso, Aristide Massardo, Rory A. Roberts, Jack Brouwer, Scott Samuelsen
-
Experimental Study and Comparison of Various Designs of Gas Flow Fields to PEM Fuel Cells and Cell Stack Performance2014 / Hong Liu, Peiwen Li, Daniel Juarez-Robles, Kai Wang, Abel Hernandez-Guerrero
-
Conceptual Mold Design for Multi-curved Natural Fiber Reinforced Composite Body Armor Panel
Abstract The development of lightweight and inexpensive body armor products is under on-going attention by both manufacturers and users. In general most body armor panels are made either from ceramic or composite materials using various...
2015 / A.B.M. Azhar, M.S. Risby, Arif S.M. Sohaimi, M.N. Hafizi, S. Khalis, et al.