Mechanical engineering topic list of research papers
-
Development of a Safety Evaluation Model for Provincial Highway2014 / Li Yuan, He-wei Yuan, Yong-feng Ma, Ying-wei Ren
-
Fault Severity Evaluation and Improvement Design for Mechanical Systems Using the Fault Injection Technique and Gini Concordance Measure2014 / Jianing Wu, Shaoze Yan
-
Preparation and Its Adsorptive Property of Modified Expanded Graphite Nanomaterials2014 / Liqin Wang, Xiujun Fu, E. Chang, Haitao Wu, Kun Zhang, et al.
-
Computational Investigation on Fully Developed Periodic Laminar Flow Structure in Baffled Circular Tube with Various BR2014 / Withada Jedsadaratanachai, Nuthvipa Jayranaiwachira, Pongjet Promvonge
-
Validation of Effective Models for Simulation of Thermal Stratification and Mixing Induced by Steam Injection into a Large Pool of Water2014 / Hua Li, Walter Villanueva, Markku Puustinen, Jani Laine, Pavel Kudinov
-
Span-to-depth ratio effect on shear strength of steel fiber-reinforced high-strength concrete deep beams using ANN model2013 / Uday Naik, Sunil Kute
-
Numerical Analysis on Propagation Characteristics and Safety Distance of Gas Explosiona
Abstract Through a roadway model with cross-section area of 80×80mm2 and length of 100 m, the changing laws of overpressure, temperature, density, combustion rate and gas velocity after the explosion of methane-air mixtures with concentration of...
2011 / Bingyou Jiang, Baiquan Lin, Shulei Shi, Chuanjie Zhu, Cheng Zhai -
Infrared Radiation Characteristic Analysis for Active-illuminated Vehicle
Abstract In order to investigate the influence of active illumination on infrared object detection, infrared radiation characteristic for an active-illuminated vehicle is analyzed in this paper. The calculation models for infrared radiation are...
2011 / Xing Yang -
Digital image processing technology applied in level measurement and control system
Abstract As the diversity of industrial processes, the common level meter devices are more impacted by external factors. This paper presents a new type of digital image processing technology for the level control system, combining with CCD camera...
2011 / Chuyan Li, Xinyu Jia, Haiyu Li, Lin Deng, Xianwei Shi -
Optimal Thermodynamics—New Upperbounds2009 / Michel Feidt
-
A reduced-complexity scheme using message passing for location tracking2012 / Yih-Shyh Chiou, Fuan Tsai, Chin-Liang Wang, Chin-Tseng Huang
-
Integrated definition modeling and Taguchi analysis of flexible manufacturing systems: aircraft industry application2013 / Mehmet Pınarbaşı, Çagrı Sel, Hacı Mehmet Alağaş, Mustafa Yüzükırmızı
-
The Study of CIQ Inspection Rate's Setting Problem Based on Gray-fuzzy Comprehensive Evaluation Theory
Abstract Inspection is not only one of the most significant duties, but the important prerequisite for going through Customs. Setting the inspection rate scientifically can not only solve the contradiction between the “check on” and “service” for...
2012 / Liu Hui, Liu Wen Ding -
The Reliability Evaluating Method Considering Component Aging for Distribution Network
Abstract In order to improve the reliability evaluation to the distribution network, uncertainty factors about aging of components are considered under conventional reliability analysis of distribution system in the paper. The relationship between...
2012 / Tianshi Wang, Yun Wu -
The Training Methods for Students’ Active and Efficient Idea Consciousness
Abstract This thesis aims to solve the problems of the students’ unordered and confused ideas, to solve the low flexibility on design work after graduated. It has researched on the training methods for the students’ active and efficient idea...
2012 / Weizhan Li, Xianying Yang, Zhaofeng Lu, Alex Yau -
A numerical study of the impact of surface roughness on heat and fluid flow past a cylindrical particle
Abstract This work is devoted to a two-dimensional numerical study of the influence of surface roughness on heat and fluid flow past a cylindrical particle. The surface roughness consists of radial notches periodically distributed on the cylinder...
2012 / F. Dierich, P.A. Nikrityuk -
Analysis and Optimal Design about a kind of Bearing Beam with Sleeve Joint Structure
Abstract Bearing beam with sleeve joint structure is widely used in telescopic machinery. The stress state is special with this kind of structure. Analysis about the sleeve joint structure in cantilever state was conducted. And the mathematical...
2012 / Jiazhi He, Yibao Chen -
Problem Identification for Underwater Remotely Operated Vehicle (ROV): A Case Study
Abstract This paper investigates and describes problem identification of Unmanned Underwater Remotely Operated Vehicle (ROV). The following is the problem identification that found after research done on several literature reviews and study cases....
2012 / F.A. Azis, M.S.M. Aras, M.Z.A. Rashid, M.N. Othman, S.S. Abdullah -
Non-Invasive Eye Tracking Technology Based on Corneal Reflex
Abstract In order to ameliorate deficiencies existing in eye tracking devices, a new method of eye tracking technology using the five near-infrared light as the source of corneal reflex is put forward and it overcomes the shortcoming of existing...
2012 / Di Gao, Guisheng Yin, Weijie Cheng, Xiaoning Feng -
Optimal Hydraulic Design and Numerical Simulation of Pumping Systems
Abstract Optimal hydraulic design is very important in the selection of pumping station design schemes. Through optimal hydraulic design of pumping system it is possible to generate better flow conditions for pump, to reduce hydraulic losses both in ...
2012 / Honggeng Zhu, Guoxian Zhu, Weigang Lu, Yong Zhang