Mechanical engineering topic list of research papers
-
A Novel Position Estimation Method Based on Displacement Correction in AIS2014 / Yi Jiang, Shufang Zhang, Dongkai Yang
-
Performance of Different Experimental Absorber Designs in Absorption Heat Pump Cycle Technologies: A Review2014 / Jonathan Ibarra-Bahena, Rosenberg Romero
-
A Self-Alignment Algorithm for SINS Based on Gravitational Apparent Motion and Sensor Data Denoising2015 / Yiting Liu, Xiaosu Xu, Xixiang Liu, Yiqing Yao, Liang Wu, et al.
-
Analysis of the cumulative exergy consumption of an integrated oxy-fuel combustion power plant2013 / Andrzej Ziębik, Paweł Gładysz
-
Day-Ahead Energy Planning with 100% Electric Vehicle Penetration in the Nordic Region by 20502014 / Zhaoxi Liu, Qiuwei Wu, Arne Nielsen, Yun Wang
-
Experimental and Thermoeconomic Analysis of Small-Scale Solar Organic Rankine Cycle (SORC) System2015 / Suresh Baral, Dokyun Kim, Eunkoo Yun, Kyung Kim
-
Special Issue: Recent Advances on Control and Architectural Design of Robotic Systems2015 / Krzysztof Kozłowski
-
A Mechanistic Approach to Model Cutting Forces in Drilling with Indexable Inserts
Abstract Holes are made in many industrial parts that need screws, pins or channels for passing fluids. The general method to produce holes in metal cutting is by drilling operations. Indexable insert drills are often used to make short holes at a...
2014 / Amir Parsian, Martin Magnevall, Tomas Beno, Mahdi Eynian -
Effect of dilution holes on the performance of a triple swirler combustor
Abstract A triple swirler combustor is considered to be a promising solution for future high temperature rise combustors. The present paper aims to study dilution holes including primary dilution holes and secondary dilution holes on the performance ...
2014 / Guoyu Ding, Xiaomin He, Ziqiang Zhao, Bokun An, Yaoyu Song, et al. -
Identification of optimum friction stir spot welding process parameters controlling the properties of low carbon automotive steel joints
Abstract Friction stir spot welding is a novel solid state process that has recently received considerable attention from various industries including automotive sectors due to many advantages over the resistance spot welding. However to apply this...
2015 / A.K. Lakshminarayanan, V.E. Annamalai, K. Elangovan -
The Application of Tooth Contact Analysis in the Shaper Modification for Face-gear
Abstract To get ideal position of contact area for face-gear drives, we researched beginningly the rack-cutter modification, setted up equation of tooth surface of parabolic rack-cutter. According to the machining coordinate systems of shaper and...
2015 / Canhui Wu, Ping Cao -
On the identification of piston slap events in internal combustion engines using tribodynamic analysis
Abstract Piston slap is a major source of vibration and noise in internal combustion engines. Therefore, better understanding of the conditions favouring piston slap can be beneficial for the reduction of engine Noise, Vibration and Harshness (NVH). ...
2014 / N. Dolatabadi, S. Theodossiades, S.J. Rothberg -
The Aerodynamic Design and Investigation of Loading Distribution of a Mixed Flow Compressor
Abstract In this paper, the design for the mixed flow compressor is based on the results of a S2 through flow aerodynamic design program and a general arbitrary curved blade design method for axial, centrifugal/mixed compressors. Three different...
2015 / Chen Xuanyu, Meng Xiangwei, Gui Xingmin, Jin Donghai -
Advancement of Solar Adsorption Cooling by Means of Heat Storage
Abstract A solar heat driven basic adsorption cooling system with silica-gel-water pair has been investigated analytically. Two cases have been studied. Performance of the chiller with different collector numbers, cycle time and heat storage. First, ...
2014 / Rifat Ara Rouf, K.C. Amanul Alam, M.A. Hakim Khan, Bidyut Baran Saha, F. Meunier, et al. -
Pseudo-characteristic upwind scheme for incompressible flows2015 / F. Barar, S. E. Razavi
-
Exergy analysis of the performance of low-temperature district heating system with geothermal heat pump2014 / Robert Sekret, Anna Nitkiewicz
-
Research on ISFLA-Based Optimal Control Strategy for the Coordinated Charging of EV Battery Swap Station2013 / Xueliang Huang, Hao Qiang, Qidong Zhang, Haijuan Li
-
A Novel Parabolic Trough Concentrating Solar Heating for Cut Tobacco Drying System2014 / Jiang Tao Liu, Ming Li, Qiong Fen Yu, De Li Ling
-
Time-Frequency Fault Feature Extraction for Rolling Bearing Based on the Tensor Manifold Method2014 / Fengtao Wang, Shouhai Chen, Jian Sun, Dawen Yan, Lei Wang, et al.
-
Vehicle Delay Estimation for an Isolated Intersection under Actuated Signal Control2014 / Shumin Feng, Yusheng Ci, Lina Wu, Fenglin Zhang