Mechanical engineering topic list of research papers
-
PID Controller Optimization by GA and Its Performances on the Electro-hydraulic Servo Control System
Abstract A proportional integral derivative (PID) controller is designed and attached to electro-hydraulic servo actuator system (EHSAS) to control the angular position of the rotary actuator which control the movable surface of space vehicles. The...
2008 / Karam M. Elbayomy, Jiao Zongxia, Zhang Huaqing -
Design Method of Under-body Platform Automotive Framing Systems
Abstract OEMs across the globe are moving to reduce the number of their platform by 50% and to focus more on selected platforms to be used to design and produce different vehicles across segments and brands on a global scale (by size and price...
2014 / Abdo Al-Zaher, Waguih ElMaraghy -
Group similarity solutions of (2+1) Boiti-Leon-Manna-Pempinelli Lax pair
Abstract In this paper, a two parameter group transformation is applied to the Lax pair of a (2+1) Boiti–Leon–Manna–Pempinelli (BMLP). Three similarity variables are derived. For each case, the Lax pair is reduced to a system of ordinary...
2013 / S. Mabrouk, M. Kassem -
Modelling Gap Acceptance Behavior of Two-Wheelers at Uncontrolled Intersection Using Neuro-Fuzzy
Abstract The main focus of this paper is to develop gap acceptance model for two-wheelers using neuro-fuzzy approach at three legged uncontrolled intersections in India. Unsignalized intersections are controlled with the help of stop or yield sign...
2014 / Jayant P. Sangole, Gopal R. Patil, Prasad S. Patare -
Distribution of Measuring Points and Piezoelectric Actuators in Flutter Suppression
Abstract Single input/single output (SISO), single input/multi out put (SIMO) and multi input/multi out put (SIMO) control laws for active flutter suppression are designed and realized in wind tunnel tests. Reasonable agreement between analytical...
2011 / Wei-min CHEN, De GUAN, Min LI, De-chao ZHU -
Image Smearing Modeling and Verification for Strapdown Star Sensor
Abstract To further extend study on celestial attitude determination with strapdown star sensor from static into dynamic field, one prerequisite is to generate precise dynamic simulating star maps. First a neat analytical solution of the smearing...
2012 / Haiyong WANG, Wenrui ZHOU, Xuan CHENG, Haoyu LIN -
Study on Military Equipment Support Modeling and Simulation
Abstract In order to estimate the redness, sustainability and support capability of the operational unit, an support simulation concept model of the military equipment is given as viewed from the system engineering modeling and simulation....
2011 / Wen-jin ZHANG, Rui KANG, Lin-han GUO, Rui-ying LI -
Extraction Phase Simulation of Cargo Airdrop System
Abstract To study the characteristics of cargo extraction, the initial phase of airdrop process, a high fidelity and extendibility simulation model with uniform motion equations for all states during extraction is developed on the basis of dynamics...
2011 / Peng KE, Chun-xin YANG, Xue-song YANG -
Improvements of Edges Diffraction Computing in GRECO
Abstract Graphical Electromagnetic Computing (GRECO) is one of the valuable methods for computing the radar cross section (RCS) of complex radar target in high frequency region. But there are some shortages of wedge detecting method in the original...
2011 / De-hua QIN, Bao-fa WANG, Tie-jun LIU -
Momentum-dominated Methane Jet Flame at Sub-atmospheric Pressure
Abstract The influence of pressure and flow rate on momentum-dominated methane laminar flames’ flickering and radiation characteristics were experimental studied to provide a focused description of diffusion flame behavior at sub-atmospheric...
2013 / Yi Zeng, Jun Fang, Jingwu Wang, Jie Li, Ran Tu, et al. -
The influence of deformation conditions in solid-state aluminium welding processes on the resulting weld strength
Abstract Solid bonding of aluminium is an important joining technology with applications in fabrication, forming and new low-carbon recycling routes. The influence of deformation conditions on the strength of the resulting weld has yet to be fully...
2014 / Daniel R. Cooper, Julian M. Allwood -
A Numerical Methodology for the Multi-objective Optimization of the DI Diesel Engine Combustion
Abstract DI Diesel engine are widely used both for industrial and automotive applications due to their durability and fuel economy. Nonethe- less, increasing environmental concerns force that type of engine to comply with increasingly demanding...
2014 / Marco Costa, Gian Marco Bianchi, Claudio Forte, Giulio Cazzoli -
Deployment Model for Urban Guide Signs Based on Road Network Topology
Abstract Guide sign system plays an important role in traffic flow guidance. The aim of the paper is to construct a deployment model for urban guide signs. In this study, a model for guide sign is proposed first. It describes the road network and...
2013 / LI Mina, Huang Min, NIU ZhongMing, RAO MingLei -
Multiloop control of a drum boiler
Abstract The Equivalent Subsystems Method (ESM) (Kozáková et al., 2011) is methodology of decentralized controller design in the frequency domain which allows designing local controllers using any SISO frequency domain method. The paper deals with...
2014 / Alena Kozáková, Štefan Bucz -
Estimating the Payback Period of In-line Micro Turbines with Analytical Probabilistic Models
Abstract This paper presents a new analytical probabilistic model that can characterize the energy recovery and economic payback period of in-line micro turbines in water distribution applications. The analytical probabilistic...
2014 / C.S. Heysel, Y.R. Filion -
Traffic conflict assessment for non-lane-based movements of motorcycles under congested conditions
Abstract Traffic conflict under congested conditions is one of the main safety issues of motorcycle traffic in developing countries. Unlike cars, motorcycles often display non-lane-based movements such as swerving or oblique following of a lead...
2013 / Long Xuan Nguyen, Shinya Hanaoka, Tomoya Kawasaki -
Optimal Averaging Time for Predicting Traffic Velocity Using Floating Car Data Technique for Advanced Traveler Information System
Abstract Many metropolitan cities are facing the problem of traffic congestion in large scale and high frequency. The congestion can be lessening by employing Intelligent Transportation Systems (ITS) including Advanced Traveler Information Systems...
2014 / Fergyanto E. Gunawan, Fajar Yoseph Chandra -
Remaining Useful Life Prediction of Lithium-Ion Batteries Based on the Wiener Process with Measurement Error2014 / Shengjin Tang, Chuanqiang Yu, Xue Wang, Xiaosong Guo, Xiaosheng Si
-
Electrical and Mechanical Performance of Carbon Fiber-Reinforced Polymer Used as the Impressed Current Anode Material2014 / Ji-Hua Zhu, Miaochang Zhu, Ningxu Han, Wei Liu, Feng Xing
-
Battery Sizing for Plug-in Hybrid Electric Vehicles in Beijing: A TCO Model Based Analysis2014 / Cong Hou, Hewu Wang, Minggao Ouyang