Mechanical engineering topic list of research papers
-
Turbulent Flow Characteristics and Dynamics Response of a Vertical-Axis Spiral Rotor2013 / Can Kang, Xin Yang, Yuli Wang
-
Modeling and Simulation of Fiber Orientation in Injection Molding of Polymer Composites2011 / Jang Min Park, Seong Jin Park
-
Dynamics of a Transportation Network Model with Homogeneous and Heterogeneous Users2012 / Yingguo Li, Zhijia Tan, Qiong Chen
-
Behavior of Carbon-Carbon Composite under Intense Heating2010 / R. Palaninathan
-
Economic Analysis of Different Nuclear Fuel Cycle Options2012 / Won Il Ko, Fanxing Gao
-
Gas Turbine Engine Control Design Using Fuzzy Logic and Neural Networks2011 / M. Bazazzadeh, H. Badihi, A. Shahriari
-
Aerodynamics of Flapping Wing at Low Reynolds Numbers: Force Measurement and Flow Visualization2011 / Abhijit Banerjee, Saurav K. Ghosh, Debopam Das
-
Compression-Induced Solidification: A Novel Processing Technique for Precise Thermoplastic Optical Components with Negligible Internal Stresses2012 / Ariane Jungmeier, Wolfgang Wildner, Dietmar Drummer, Ines Kühnert
-
Study on Microchannel Design and Burst Frequency Detection for Centrifugal Microfluidic System2013 / Yaw-Jen Chang, Shia-Chung Chen, Cheng-Li Hsu
-
Modeling of Moisture Diffusion in Carbon Braided Composites2007 / S. Laurenzi, T. Albrizio, M. Marchetti
-
Study on the Train Operation Optimization of Passenger Dedicated Lines Based on Satisfaction2012 / Zhipeng Huang, Huimin Niu
-
Acoustic Illusion near Boundaries of Arbitrary Curved Geometry2013 / Weiwei Kan, Bin Liang, Xuefeng Zhu, Ruiqi Li, Xinye Zou, et al.
-
Measurements of Gasification Characteristics of Coal and Char in CO2-Rich Gas Flow by TG-DTA2013 / Zhigang Li, Xiaoming Zhang, Yuichi Sugai, Jiren Wang, Kyuro Sasaki
-
Comparative study on multibody vehicle dynamics models based on subsystem synthesis method using Cartesian and joint coordinates
Abstract The subsystem synthesis method has been developed in order to improve computational efficiency for a multibody vehicle dynamics model. Using the subsystem synthesis method, equations of motion of the base body and each subsystem can be...
2012 / Sung Soo Kim, Wan Hee Jeong, Myung Ho Kim, Jong Boo Han -
Effects of heat release on triple flames2002 / G. R. Ruetsch, L. Vervisch, A. Liñán
-
2-Dimensional SVFC Application in Path Planning of Mobile Robots
Abstract A 2-dimensional single variable fuzzy controller (SVFC) is introduced to achieve the path planning for mobile robots. With fusing some fuzzy and uncertain information obtained from distance and angle sensors, and invoking the corresponding...
2012 / Xia Linlin, Tao Changxing, Yang Xuedong, Kan Yunhan, Feng Yan -
Development of flexible telescopic boom model using absolute nodal coordinate formulation sliding joint constraints with LuGre friction
Abstract In this investigation, a modeling procedure of a telescopic boom of cranes is developed using the absolute nodal coordinate formulation together with the sliding joint constraints. Since telescopic booms are extracted and retracted under...
2012 / Hiroki Fujita, Hiroyuki Sugiyama -
Experimental and numerical investigations on resonant characteristics of a single-layer piezoceramic plate and a cross-ply piezolaminated composite plate2006 / Chien-Ching Ma, Hsien-Yang Lin, Yu-Chih Lin, Yu-Hsi Huang
-
Self-powering wireless devices for cloud manufacturing applications2015 / V. Ostasevicius, V. Jurenas, V. Markevicius, R. Gaidys, M. Zilys, et al.
-
The Static Unbalance Analysis and Its Measurement System For Gimbals Axes of an Inertial Stabilization Platform2015 / Hui Yang, Yan Zhao, Min Li, Falin Wu