Mechanical engineering topic list of research papers
-
Numerical Investigation of a First Stage of a Multistage Centrifugal Pump: Impeller, Diffuser with Return Vanes, and Casing2013 / Nicolas La Roche-Carrier, Guyh Dituba Ngoma, Walid Ghie
-
A Real-Time Embedded Blind Spot Safety Assistance System2012 / Bing-Fei Wu, Chih-Chung Kao, Ying-Feng Li, Min-Yu Tsai
-
Transient elastohydrodynamic lubrication of rough new or worn piston compression ring conjunction with an out-of-round cylinder bore2012 / R. Rahmani, S. Theodossiades, H. Rahnejat, B. Fitzsimons
-
The Investigation of Laser Lap Welding Process on High-Strength Galvanized Steel Sheets2011 / Shiquan Zhou, Yi Zhao, Zhenguo Peng, Fangjie Ren
-
Predicting Driver Behavior Using Field Experiment Data and Driving Simulator Experiment Data: Assessing Impact of Elimination of Stop Regulation at Railway Crossings2013 / Toshihisa Sato, Motoyuki Akamatsu, Toru Shibata, Shingo Matsumoto, Naoki Hatakeyama, et al.
-
A Nonlinear Optimization Technique of Tunnel Construction Based on DE and LSSVM2013 / Xing Jun, Jiang Annan, Wen Zhiwu, Qiu Jingping
-
Non-Fourier Heat Conduction Analysis with Temperature-Dependent Thermal Conductivity2011 / H. Rahideh, P. Malekzadeh, M. R. Golbahar Haghighi
-
Modeling of Location Estimation for Object Tracking in WSN2013 / Hung-Chi Chu, Tsung-Han Lee, Lin-huang Chang, Chung-Jie Li
-
Dynamic Object Tracking Tree in Wireless Sensor Network2010 / Min-Xiou Chen, Che-Chen Hu, Wen-Yen Weng
-
A Kinematic Approach to Determining the Optimal Actuator Sensor Architecture for Space Robots2010 / P. Boning, S. Dubowsky
-
Using statistically designed experiments for safety system optimization2004 / J D Andrews, L M Bartlett
-
Use of Multi-Functional Flexible Micro-Sensors for in situ Measurement of Temperature, Voltage and Fuel Flow in a Proton Exchange Membrane Fuel Cell2010 / Chi-Yuan Lee, Pin-Cheng Chan, Chung-Ju Lee
-
Modeling of an Air Conditioning System with Geothermal Heat Pump for a Residential Building2013 / Silvia Cocchi, Sonia Castellucci, Andrea Tucci
-
Variations of Ant Colony Optimization for the Solution of the Structural Damage Identification Problem
Abstract In this work the inverse problem of identification of structural stiffness coefficients of a damped spring-mass system is tackled. The problem is solved by using different versions of Ant Colony Optimization (ACO) metaheuristic solely or...
2015 / Carlos E. Braun, Leonardo D. Chiwiacowsky, Arthur T. Ǵomez -
A Force Control Test Rig for the Dynamic Characterization of Helicopter Primary Flight Control Systems
Abstract This paper describes an electronically controlled active force control system developed to test the tail rotor actuator of a new medium size helicopter. As for all hydraulic force control systems, the critical control issue is to mitigate...
2015 / Alessandro Bertucci, Andrea Mornacchi, Giovanni Jacazio, Massimo Sorli -
Vibration Characteristics of Gravity-Type Caisson Breakwater Structure with Water-Level Variation2013 / So-Young Lee, Thanh-Canh Huynh, Jeong-Tae Kim, Han-Sam Yoon, Sang-Hun Han
-
Fast Multi-objective Optimisation of a Micro-fluidic Device by Using Graphics Accelerators
Abstract The development of technology that uses widely available and inexpensive hardware for real- world cases is presented in this work. This is part of a long-term approach to minimise the impact of aviation on the environment and aims to enable ...
2015 / Christos Tsotskas, Timoleon Kipouros, A. Mark Savill -
Procedural modeling of structurally-sound masonry buildings2009 / Emily Whiting, John Ochsendorf, Frédo Durand
-
Statistical Analysis of Engine System-level Factors for Palm Biodiesel Fuelled Diesel Engine Responses
Abstract In this study, a 0D/1D gas dynamics numerical model of a single-cylinder, 4-stroke diesel engine is used to simulate entire engine cycle from air intake to exhaust product. The engine model is successfully validated against experimental...
2015 / Jo-Han Ng, Jing Huey Khor, Kang Yao Wong, Srithar Rajoo, Cheng Tung Chong -
Parallel iterative solution of the incompressible Navier-Stokes equations with application to rotating wings
Abstract We discuss aspects of implementation and performance of parallel iterative solution techniques applied to low Reynolds number flows around fixed and moving rigid bodies. The incompressible Navier–Stokes equations are discretised with...
2015 / Jakub Šístek, Fehmi Cirak