Mechanical engineering topic list of research papers
-
Online Internal Temperature Estimation for Lithium-Ion Batteries Based on Kalman Filter2015 / Jinlei Sun, Guo Wei, Lei Pei, Rengui Lu, Kai Song, et al.
-
Effects of Degree of Superheat on the Running Performance of an Organic Rankine Cycle (ORC) Waste Heat Recovery System for Diesel Engines under Various Operating Conditions2014 / Kai Yang, Hongguang Zhang, Songsong Song, Fubin Yang, Hao Liu, et al.
-
Three-Phase Harmonic Analysis Method for Unbalanced Distribution Systems2014 / Jen-Hao Teng, Shu-Hung Liao, Rong-Ceng Leou
-
Recycle Effect on Device Performance of Wire Mesh Packed Double-Pass Solar Air Heaters2014 / Chii-Dong Ho, Chun-Sheng Lin, Tz-Jin Yang, Chun-Chieh Chao
-
Friction Stir Welding of AA2024-T3 plate – the influence of different pin types2015 / D. Trimble, H. Mitrogiannopoulos, G. E. O'Donnell, S. McFadden
-
Pluripotent State Induction in Mouse Embryonic Fibroblast Using mRNAs of Reprogramming Factors2014 / Ahmed El-Sayed, Zhentao Zhang, Lei Zhang, Zhiyong Liu, Louise Abbott, et al.
-
The energy and greenhouse-gas implications of internet video streaming in the United States2014 / Arman Shehabi, Ben Walker, Eric Masanet
-
Clarifying anti-reflexivity: conservative opposition to impact science and scientific evidence2014 / Riley E Dunlap
-
Advanced Laser Transmission Welding Strategies for Fibre Reinforced Thermoplastics
Abstract Laser transmission welding can be used to join endless fibre reinforced thermoplastics. The welding temperature is affected by the heat conduction along carbon fibresand depends on the local orientation of the fibres in the weld seam and...
2014 / V. Wippo, P. Jaeschke, M. Brueggmann, O. Suttmann, L. Overmeyer -
Numerical Study of the Combustion Field in Dual-cavity Scramjet Combustor
Abstract As one of the most effective structures of flame stabilizer, cavity owns an important position in scramjet combustor research, especially the tandem dual-cavity, which has a remarkable advantage in promoting fuel airmixing and flame...
2015 / Wang Lu, Qian Zhansen, Gao Liangjie -
Evaluation of plant operational states with the consideration of loop structures under accident conditions
Abstract Nuclear power plants have logical loop structures in their system configuration. This paper explains the method to solve a loop structure in reliability analysis. As examples of loop structured systems, the reactor core...
2015 / Takeshi Matsuoka -
Tip-leakage flow loss reduction in a two-stage turbine using axisymmetric-casing contouring
Abstract In order to reduce the losses caused by tip-leakage flow, axisymmetric contouring is applied to the casing of a two-stage unshrouded high pressure turbine (HPT) of aero-engine in this paper. This investigation focuses on the effects of...
2014 / Zuojun Wei, Weiyang Qiao, Peijie Shi, Pingping Chen, Lei Zhao -
Markov modeling and reliability analysis of urea synthesis system of a fertilizer plant2014 / Anil Kr. Aggarwal, Sanjeev Kumar, Vikram Singh, Tarun Kr. Garg
-
Integrating Design for Assembly Guidelines in Packaging Design with a Context-based Approach
Abstract In the product lifecycle, the packaging, as an object, has been on the back burner with respect to product and production systems design and some authors stated that its influence starts at the packing stage and ends when the customer...
2014 / P. Betancur-Muñoz, G. Osorio-Gómez, J.F. Martínez-Cadavid, J.F. Duque-Lombana -
GTA modeling of combined cycle power plant efficiency analysis
Abstract A methodology based upon graph theory and matrix method is developed for the efficiency analysis of a Combined Cycle Power Plant (CCPP) with a view that a person at managerial level may decide regarding efficiency improvement without...
2014 / Nikhil Dev, Samsher, S.S. Kachhwaha, Rajesh Attri -
Lifetime prediction based on Gamma processes from accelerated degradation data
Abstract Accelerated degradation test is a useful approach to predict the product lifetime at the normal use stress level, especially for highly reliable products. Two kinds of the lifetime prediction based on Gamma processes were studied. One was...
2014 / Haowei Wang, Tingxue Xu, Qiaoli Mi -
An economic and low-carbon day-ahead Pareto-optimal scheduling for wind farm integrated power systems with demand response2015 / Rui MA, Kai LI, Xuan LI, Zeyu QIN
-
Multiphysics Simulation of the Material Removal in Jet Electrochemical Machining
Abstract Jet Electrochemical Machining (Jet-ECM) is a technology for quickly and flexibly generating micro structures and micro geometries in metallic parts independently from the material's hardness and without any thermal or mechanical impact [1]. ...
2015 / Matthias Hackert-Oschätzchen, Raphael Paul, Michael Kowalick, André Martin, Gunnar Meichsner, et al. -
Model Parameter Adaption-Based Multi-Model Algorithm for Extended Object Tracking Using a Random Matrix2014 / Borui Li, Chundi Mu, Shuli Han, Tianming Bai
-
Dynamics and Control of Lateral Tower Vibrations in Offshore Wind Turbines by Means of Active Generator Torque2014 / Zili Zhang, Søren Nielsen, Frede Blaabjerg, Dao Zhou