Mechanical engineering topic list of research papers
-
Surface Roughness Control Based on Digital Copy Milling Concept to Achieve Autonomous Milling Operation
Abstract In order to develop an autonomous and intelligent machine tool, a system named Digital Copy Milling (DCM) was developed in our previous studies. The DCM generates tool paths in real time based on the principle of copy milling. In the DCM,...
2012 / Toshihiko Hirooka, Tomokazu Kobayashi, Atsushi Hakotani, Ryuta Sato, Keiichi Shirase -
Mitigation of Noise and Vibration in the High-Pressure Fuel System of a Gasoline Direct Injection Engine
Abstract In the past decade, deployment of high-pressure direct injection systems in petrol engines has dramatically increased, mainly due to the advantages for fuel economy. At the heart of a gasoline direct injection system lies the high-pressure...
2012 / Jonathan Borg, Atsushi Watanabe, Kenichiro Tokuo -
A Trip-Chain Based Combined Mode and Route Choice Network Equilibrium Model Considering Common Lines Problem in Transit Assignment Model
Abstract This paper proposes new type of combined mode and route choice network equilibrium model where the travellers are assumed to choose their mode considering whole of their trip-chain and the common lines problem is considered in the public...
2011 / Takashi Higuchi, Hiroshi Shimamoto, Nobuhiro Uno, Yasuhiro Shiomi -
A Simulation Model to Determine Energy Savings in an Air Conditioning Office Building
Abstract Energy saving and energy efficient equipment are attracting a lot of attention due to the escalating energy costs world wide. Selection of Heating, Ventilation and Air-Conditioning (HVAC) system for buildings is considered to play a vital...
2011 / E.T.H. Mohamed, K.N. Abdalla -
Edge Detection Algorithm Based on Multiscale Product with Gaussian Function
Abstract According to Mallat multi-resolution analysis, A new edge detection algorithm based on multiscale product is presented, which uses Gaussian function and its first-derivative as lowpass and highpass filter to enhance edge and suppress noise, ...
2011 / Zhao Xiaoli -
The calculation of the Classical V-Belt life with different reliability
Abstract The methods from the GB / T 11355 and GB / T 13575 can not calculate precisely the driving capability of the V-belt which had requirement of reliability. A new formula which can figure out the life of the V-belt with different reliability...
2011 / Chuanqiong Sun, Aihua Ren, Guoxing Sun, Yongde Liu -
Study of maintenance task generation concept model to virtual maintenance
Abstract In order to satisfy the virtual maintenance system for the tasks generation and management, the maintenance task identification, the structure of maintenance task content and the concept model task generation are studied. Researches on the...
2011 / Wang Fengchan, Sun Youchao, Xu qinghong -
Service Systems Engineering: Emerging Skills and Tools
Abstract We are living in a global service economy in which services now make up more than 78% of the US Gross Domestic Product (GDP). This growth in Service has also become a global phenomenon and this has brought much needed attention to Service...
2012 / Ricardo Pineda, Amit Lopes, Bill Tseng, Oscar H. Salcedo -
An Analysis on Mixed Traffic Flow of Conventional Passenger Cars and Microcars Using a Cellular Automata Model
Abstract Characteristics of traffic with microcars in traffic flow are analysed by using a cellular automata simulation model. 400m of urban highway and arterial road segment both with two lanes are supposed respectively, including an intersection...
2012 / Rui Mu, Toshiyuki Yamamoto -
Influence of Sound Absorbing Wedge to the Underwater Sound Radiation Characteristics of a Sonar Platform
Abstract The numerical prediction of the low-frequency self-noise of the sonar platform with sound absorbing wedge is carried out. Considering the acoustic-solid coupling effects of sonar district in the flow field, the structural response of the...
2013 / Di Jia, Xiaozhong Xie, Fuzhen Pang, Xuhong Miao -
A Portable All-Position Special Welding Robot
Abstract This paper develops a portable all-position welding robot for the welding of intersected pipes. The mathematical model of welding seam has been established and a complete procedure is adopted to conduct the design. The task and motion of...
2011 / Fu-shen Ren, Xiao-ze Cheng, Su-li Chen -
Conjugate heat transfer investigation of cooled turbine using the preconditioned density-based algorithm
Abstract The preconditioned density-based conjugate heat transfer (CHT) algorithm was used to investigate the heat transfer characteristics of a cooled turbine vane. Fluid domain provided boundary heat flux for solid domain and obtained boundary...
2013 / Peng Wang, Yu Li, Zhengping Zou, Weihao Zhang -
Using a pressure controlled vortex design method to control secondary flow losses in a turbine stage
Abstract A turbine design method based on pressure controlled vortex design (PCVD) is presented to design a small-size turbine stage. Contrary to the conventional controlled vortex design (CVD) method, the main objective of PCVD is to control the...
2013 / Qingfeng Deng, Qun Zheng, Guoqiang Yue, Hai Zhang, Mingcong Luo -
An Inexpensive Method for Kinematic Calibration of a Parallel Robot by Using One Hand-Held Camera as Main Sensor2013 / Alberto Traslosheros, José Sebastián, Jesús Torrijos, Ricardo Carelli, Eduardo Castillo
-
Introduction to the Special Issue on “New Trends towards Automatic Vehicle Control and Perception Systems”2013 / Vicente Milanés, Luis Bergasa
-
Laser-Based Pedestrian Tracking in Outdoor Environments by Multiple Mobile Robots2012 / Masataka Ozaki, Kei Kakimuma, Masafumi Hashimoto, Kazuhiko Takahashi
-
Turbulent and Transitional Modeling of Drag on Oceanographic Measurement Devices2012 / J. P. Abraham, J. M. Gorman, F. Reseghetti, E. M. Sparrow, W. J. Minkowycz
-
Friction Experiments for Dynamical Coefficient Measurement2011 / J. J. Arnoux, G. Sutter, G. List, A. Molinari
-
The Basic Differential Equations of Self-Anchored Cable-Stayed Suspension Bridge2010 / Wang Hui-Li, Qin Si-Feng, Zhang Zhe, Huang Cai-Liang, Xu Wen-Jun
-
Experimental Study of Damping and Energy Regeneration Characteristics of a Hydraulic Electromagnetic Shock Absorber2013 / Z. Fang, X. Guo, L. Xu, H. Zhang