Materials engineering topic list of research papers
-
A Comparative Study of Sinusoidal PWM and Third Harmonic Injected PWM Reference Signal on Five Level Diode Clamp Inverter
Abstract This paper present the comparative modulation of Sinusoidal PWM and Third Harmonic Injected PWM Reference signal with carrier signal PD, POD, and APOD on 5 Level Diode Clamp on a R-L load. All of process are simulate with computer program...
2016 / Wanchai Subsingha -
Tool Wear and Vibrations Generated When Turning High-chromium White Cast Iron with pCBN Tools
Abstract Dynamic behavior and stability of system ‘tool-workpiece’ when machining HCCI with pCBN tools are determined by the processes which occur in cutting zone. The cutting process is characterized by formation of tool protection layer (TPL) on...
2016 / O. Gutnichenko, V. Bushlya, J.M. Zhou, J.-E. Stahl -
Trends in Simulation and Planning of Manufacturing Companies
Abstract Increasing the efficiency of production planning is a very hot topic from the perspective of introducing lean production into manufacturing. Simulation study dealing with simulation application for production planning support is a fundament ...
2016 / Branislav Bako, Pavol Božek -
A room-temperature magnetic semiconductor from a ferromagnetic metallic glass2016 / Wenjian Liu, Hongxia Zhang, Jin-an Shi, Zhongchang Wang, Cheng Song, et al.
-
Analysis of the Thermal and Magnetic Properties of Amorphous Fe61Co10Zr2.5Hf2.5Me2W2B20 (Where Me = Mo, Nb, Ni Or Y) Ribbons2016 / K. Gruszka, M. Nabiałek, M. Szota, K. Bloch, J. Gondro, et al.
-
On the magnetic anisotropy in Fe78Si9B13 ingots and amorphous ribbons: Orientation aligning of Fe-based phases/clusters2017 / X. Wang, H. J. Ma, Z. H. Sheng, S. F. Jin, W. Xu, et al.
-
Additively-manufactured piezoelectric devices2015 / David I. Woodward, Christopher P. Purssell, Duncan R. Billson, David A. Hutchins, Simon J. Leigh
-
Surface and Material Modifications of Tempered Steel after Precision Grinding with Electroplated Coarse Grained Diamond Wheels
Abstract One particular kind of engineered grinding wheels are precisely profiled grinding tools with flattened coarse diamond grains, primarily used for machining of brittle materials. Because of their grain geometries, they are also expected to...
2016 / C. Heinzel, F. Borchers, D. Berger, L. Ehle -
J-A elastic-plastic crack tip field and the two-parameter fracture criterion
Abstract The paper deals with a review of theoretical and numerical aspects of the two-parameter J-A approach in elastic-plastic fracture mechanics. This approach is based on the three-term asymptotic expansion for the stress field near the tip of...
2016 / Yu.G. Matvienko, G.P. Nikishkov -
Secure Communication Based on Rubik's Cube Algorithm and Chaotic Baker Map
Abstract In the field of digital and multimedia applications, more multimedia data are developed and transmitted in art, entertainment, advertising, commercial areas, education and training through the networks, which may have important information...
2016 / K.A. Abitha, Pradeep K. Bharathan -
Diversification of MgO//Mg interfacial crystal orientations during oxidation: A density functional theory study
Abstract In this work we use computer simulations to explain the variety of crystal orientations observed at interfaces between MgO and Mg when Mg single crystals are oxidized. Using first-principles density functional theory simulations we...
2016 / Wenwu Xu, Andrew P. Horsfield, David Wearing, Peter D. Lee -
Transition Metal Carbides and Nitrides in Energy Storage and Conversion2016 / Yu Zhong, Xinhui Xia, Fan Shi, Jiye Zhan, Jiangping Tu, et al.
-
LABS problem and ground state spin glasses system2016 / A.N. Leukhin, V.I. Bezrodnyi, Yu.A. Kozlova
-
Type Synthesis of Fully-decoupled Three-rotational and One-translational Parallel Mechanisms2016 / Yi Cao, Hai Chen, Youlei Qin, Kai Liu, Shuyi Ge, et al.
-
Concentration of NaOH and the Effect on the Properties of Fly Ash Based Geopolymer
Abstract Synthesis of geopolymer matrixes involved utilization of aluminosilicate materials and alkali activators as the main starting materials where the former could be fly ash, slag or kaolin and the latter commonly used are sodium hydroxide...
2016 / Rashidah Mohamed Hamidi, Zakaria Man, Khairun Azizi Azizli -
Quantifying Bulk Electrode Strain and Material Displacement within Lithium Batteries via High-Speed Operando Tomography and Digital Volume Correlation2015 / Donal P. Finegan, Erika Tudisco, Mario Scheel, James B. Robinson, Oluwadamilola O. Taiwo, et al.
-
Fatigue properties of conventionally manufactured and micro-powder-injection-moulded 17-4PH micro-components2016 / S. A. Slaby, O. Kraft, C. Eberl
-
MRT detection of fretting fatigue cracks in a cableway locked coil rope
Abstract The Magnetic Rope Testing is a non-destructive method in use for the detection of flaws and cracks in steel wire ropes. Given the severe protocol of safety certification for in-service cableway ropes, a proper methodology operating in...
2014 / L. Collini, F. Degasperi -
An Assessment of Sustainability for Turning Process in an Automobile Firm
Abstract The concept of Sustainable Manufacturing (SM) has emerged out as a key alternative to improving the performance of machining processes. Though there are many descriptive frameworks available in the literature to assess sustainability still, ...
2016 / Neeraj Bhanot, P. Venkateswara Rao, S.G. Deshmukh -
Fast Determination of the Material Removal Characteristics in Pulsed Electrochemical Machining
Abstract Electrochemical machining (ECM) of metallic materials is a complex manufacturing process. Currently the design of the process parameters and the cathode geometry is determined by expensive and inefficient experiments. This paper introduces...
2016 / G. Meichsner, M. Hackert-Oschätzchen, M. Krönert, J. Edelmann, A. Schubert, et al.