Materials engineering topic list of research papers
-
Issue Information2016 /
-
A highly shape-adaptive, stretchable design based on conductive liquid for energy harvesting and self-powered biomechanical monitoring2016 / F. Yi, X. Wang, S. Niu, S. Li, Y. Yin, et al.
-
Influences of a Rippled Surface on Growth Rates of Tollmien-Schlichting Waves
Abstract The goal of this study is a numerical investigation of the effect of rippled surfaces on transition of laminar-wing flow by Tollmien- Schlichting (TS) waves. This will provide a numerical tool for the prediction of dominating physical...
2015 / Heinrich Lüdeke -
Combined effect of damage and plastic anisotropy on the ductility limit of thin metal sheets
Abstract It is well known that both damage and plastic anisotropy strongly affect the ductility limit of thin metal sheets. Due to the manufacturing processes, initial defects, such as inclusions and voids, are commonly present in the produced sheet ...
2016 / Sabeur Msolli, Mohamed Ben Bettaieb, Farid Abed-Meraim -
A Study on Lateral Deformation of Monopile of Offshore Wind Turbine due to Environmental Loads
Abstract An analytical study is performed to evaluate the displacement behavior of monopile of offshore wind turbine founded in sandy soil. The system consists of pile, turbine tower and soil modeled as 3D finite element model in ANSYS. An explicit...
2016 / Neenu Maria Jose, Alice Mathai -
Bottom Ash Characterization and its Catalytic Potential in Biomass Gasification
Abstract Biomass gasification has received much attention in recent years due to efforts in finding alternatives to fossil fuels. However the inefficiencies of the process and also the by-product produced during the gasification makes this process...
2016 / Angga Pratama Herman, Suzana Yusup, Muhammad Shahbaz, David Onoja Patrick -
Coping with climate change and China's wind energy sustainable development
Abstract Greenhouse gas emissions are the main cause of today's climate change. To address this problem, the world is in an era of new round energy transformation, and the existing energy structure is being reformed. In this paper, according to the...
2016 / De-Xin He -
Weldability of austenitic stainless steel by metal arc welding with different shielding gas
Abstract During fusion welding the molten metal is shielded from contact with the atmospheric gas by means of a gaseous flux. The shielding gas prevents weld embrittlement, affects welding quality, because of its influence on filler metal transfer,...
2016 / Girolamo Costanza, Andrea Sili, Maria Elisa Tata -
Investigation of a solder bumping technique for flip‐chip interconnection2004 / David A. Hutt, Daniel G. Rhodes, Paul P. Conway, Samjid H. Mannan, David C. Whalley, et al.
-
Performance Chart: A Novel Method for Performance Analysis of Multi-unit Air Conditioners
Abstract Multi-unit air conditioners (MUACs) keep fast increasing for its high efficiency and thermal comfort. A novel method, performance chart, is presented for the performance analysis of MUACs. The performance chart is generated by superimposing ...
2016 / Shuangquan Shao, Weijia Zhang, Hainan Zhang, Hongbo Xu, Changqing Tian -
Iodine vapor staining for atomic number contrast in backscattered electron and X-ray imaging2014 / Alan Boyde, Fergus A. Mccorkell, Graham K. Taylor, Richard J. Bomphrey, Michael Doube
-
High Performance Field Emitters2016 / Clare M. Collins, Richard J. Parmee, William I. Milne, Matthew T. Cole
-
Recent Development of Advanced Electrode Materials by Atomic Layer Deposition for Electrochemical Energy Storage2016 / Cao Guan, John Wang
-
Synthesis and Characterization of Urea-formaldehyde Microcapsules Containing Functionalized Polydimethylsiloxanes
Abstract Self-healing anticorrosive coatings require healing agents with hydrophobic properties and low glass transition temperature. Polydimethylsiloxanes are group of compounds with high degree of hydrophobicity and very low glass transition...
2016 / Hafeez Ullah, Khairun Azizli, Zakaria B. Man, Mokhtar B. Che Ismail -
Usefulness of target delineation based on the two extreme phases of a four-dimensional computed tomography scan in stereotactic body radiation therapy for lung cancer2014 / Seong Soon Jang, Gil Ja Huh, Suk Young Park, Po Song Yang, EunYoun Cho
-
Turbine design and field development concepts for tidal, ocean, and river applications2014 / Dag Herman Zeiner-Gundersen
-
Image dehazing technique based on polarimetric spectral analysis
Abstract Image took under hazy weather suffers from poor contrast and resolution, the haze particles will attenuate the light reflected by the targets and add unwanted scattering light. Based on the fact that the target reflection and scattering...
2016 / Pu Xia, Xuebin Liu -
Intensity-modulated abrupt tapered Fiber Mach-Zehnder Interferometer for the simultaneous sensing of temperature and curvature
Abstract An abrupt tapered fiber In-Line Mach-Zehnder Interferometer sensor for simultaneous measurement of temperature and curvature is proposed and experimentally demonstrated. The sensor head is fabricated by arcing Corning SMF-28 using a...
2016 / Y.M. Raji, H.S. Lin, S.A. Ibrahim, M.R. Mokhtar, Z. Yusoff -
Cyclic Deformation Behavior of Friction Drilled Internal Threads in AlSi10Mg and AZ31 Profiles
Abstract Metallic lightweight materials are used for enhancing dynamic range, resource optimization and emission reduction in many fields of traffic engineering, whereby aluminium and magnesium components are manufactured by means of welded,...
2016 / P. Wittke, F. Walther -
Manufacturing Miniature Products by Micro-grinding: A Review
Abstract Demand for complex structures and miniature features, especially on hard and brittle materials with a required surface finish, urges a significant advancement of manufacturing technology. In the recent years, a number of micro-manufacturing ...
2016 / A. Pratap, K. Patra, A.A. Dyakonov