Materials engineering topic list of research papers
-
Development of Nano TiO2–Geopolymer Functional Composite as Antifouling Bricks2017 / Nurul Kusuma Wardani, Andi Ikhsan Maulana, Nurfadilla, Subaer
-
Mechanical behavior and fracture mechanisms of titanium alloy welded joint made by PLBW
Abstract Component parts made of a commercial two-phase α + β Ti-6Al-4V alloy can be assembled by Nd:YAG pulsed laser beam welding. Welding processes are known to result in strong heterogeneities, i.e. strength mismatch and residual stresses and are ...
2016 / Benjamin Sarre, Sylvain Flouriot, Thomas Paris, Benoit Panicaud, Guillaume Geandier -
Dimensional synthesis of six-bar Stephenson II linkage for fifteen precision points path generation
Summary This paper presents the dimensional synthesis of a planar six-bar Stephenson II linkage having single degree of freedom with rotational constraints. The objective of the synthesis is to determine all the link lengths with their orientations...
2016 / Khalid Nafees, Aas Mohammad -
Surface roughness investigation of ultrafine-grained aluminum alloy subjected to high speed erosion
Abstract This work presents first attempts to study influence of severe plastic deformation (SPD) procedure on material surface performance in high speed erosion conditions. Ultrafine-grained Aluminum alloy samples (after high pressure torsion) and...
2016 / N. Kazarinov, A. Evsyifeev, Y. Petrov, V. Lashkov, S. Atroshenko, et al. -
The effect of the thickness of tunneling layer on the memory properties of (Cu2O)0.5(Al2O3)0.5 high-kcomposite charge-trapping memory devices2016 / Jinqiu Liu, Jianxin Lu, Jiang Yin, Bo Xu, Yidong Xia, et al.
-
Tensile Strength Properties of Sand-bentonite Mixtures Enhanced with Cement
Abstract Measurement of tensile strength of soil by direct methods can be challenging due to difficulties in sample preparation and in fixing the specimen while applying uniaxial tension forces. However the tensile strength of soil samples can be...
2016 / Anoosheh Iravanian, Huriye Bilsel -
A rational derivation of dynamic higher order equations for functionally graded micropolar plates
Abstract The dynamics of functionally graded micropolar plates is considered. The derivation process is based on power series expansions in the thickness coordinate. Using the three-dimensional equations of motion for micropolar continuum,...
2016 / Hossein Abadikhah, Peter D. Folkow -
Metallurgical analysis of a failed maraging steel shear screw used in the band separation system of a satellite launch vehicle
Abstract Maraging steels have excellent combination of strength and toughness and are extensively used for a variety of aerospace applications. In one such critical application, this steel was used to fabricate shear screws of a stage separation...
2016 / S.V.S. Narayana Murty, Sushant K. Manwatkar, P. Ramesh Narayanan -
Phase Identification of Nanometric Precipitates in Al-Si-Cu Aluminum Alloy by Hr-Stem Investigations2016 / M. Pawlyta, K. Labisz, K. Matus
-
The Influence of Heat Treatment on the Magnetization Process (within Strong Magnetic Fields) for the Alloy: Fe61Co10Y8Cu1B202016 / K. Gruszka, M. Nabiałek, K. Błoch
-
Producing High-Strength Metals by I-ECAP2015 / Michal Gzyl, Andrzej Rosochowski, Sonia Boczkal, Lech Olejnik, Mohd Nizam Katimon
-
Corrosion of Steel Alloys with Ferrite Coating
Abstract The corrosion protection offered by coatings of hexagonal Sr ferrites on steel samples in the presence of chloride was evaluated by electrochemical techniques. Different samples were prepared using Nd-Co doped and un-doped strontium...
2015 / C.A. Herme, G.P. Cicileo, P.G. Bercoff, S.E. Jacobo -
Determination of crack initiation and crack growth stress-life curves by fracture mechanics experiments and statistical analysis
Abstract It is well known that the fatigue lifetime of a notched component consists of the crack initiation lifetime (crack size equal to the characteristic microstructure size) and the crack growth lifetime. The crack growth lifetime is easily...
2016 / Stefan Kolitsch, Hans-Peter Gänser, Reinhard Pippan -
A Bioinspired Swimming and Walking Hydrogel Driven by Light-Controlled Local Density2015 / Lei Wang, Yang Liu, Yao Cheng, Xiuguo Cui, Huiqin Lian, et al.
-
An experimental study of partial melting and fractional crystallization on the HED parent body2015 / Helen O. Ashcroft, Bernard J. Wood
-
What Can Electron Microscopy Tell Us Beyond Crystal Structures?2016 / Wuzong Zhou, Heather F. Greer
-
Toward an Overall Analytical Framework for the Integrated Sustainability Assessment of the Production and Supply of Raw Materials and Primary Energy Carriers2015 / Jo Dewulf, Lucia Mancini, Gian Andrea Blengini, Serenella Sala, Cynthia Latunussa, et al.
-
Electrical conductivity retention and electrochemical activity of CSA doped graphene/gold nanoparticle@ polyaniline composites
Abstract This paper reports the synthesis of CTAB mediated CSA doped PANI and GN/GNP@ PANI composite nanofibers. The as synthesized composite nanofibers were examined by TEM, SEM, XRD, Raman spectroscopy; UV–visible diffused reflectance spectroscopy ...
2016 / Md. Akherul Islam, M. Ehtisham Khan, Muhammad Mohsin Hossain, Mudassir Hasan -
Damage detection using modal frequency curve and squared residual wavelet coefficients-based damage indicator
Abstract A theoretical and experimental study of the frequency-based damage detection method has been presented in this paper. Based on the eigenvalue problem and perturbation assumption of defect in modal response, the theoretical basis of the...
2016 / Chen Yang, S. Olutunde Oyadiji -
Survey of selected adhesive bonding properties of nine European softwood and hardwood species2016 / Johannes Konnerth, Marcel Kluge, Georg Schweizer, Milica Miljković, Wolfgang Gindl-Altmutter