Materials engineering topic list of research papers
-
Properties of interval valued intuitionistic (S,T) – Fuzzy graphs
Abstract The basis of the concept of interval valued intuitionistic fuzzy sets was introduced by K. Atanassov. Interval valued intuitionistic models provide more precision, flexibility, and compatibility to a system than do classic fuzzy models. In...
2016 / Hossein Rashmanlou, R.A. Borzooei, Sovan Samanta, Madhumangal Pal -
Influence of Different Asymmetrical Cutting Edge Microgeometries on Surface Integrity
Abstract The importance of cutting edge microgeometries in machining operations has been proven time after time again. Not only with regard to wear, but also as an important factor influencing the resulting surface integrity. In this paper the...
2016 / Eric Segebade, Frederik Zanger, Volker Schulze -
Assessment of constraint independence and temperature dependence of critical fracture energy, Gfr
Abstract Characterisation of ductile fracture is a major problem, especially in the nuclear industry where the material behaviour needs to be characterized over a wide range of temperature considering the embrittlement of the material due to...
2016 / S. Choudhury, S.K. Acharyya, S. Dhar -
High Performance Grinding
Abstract The efficient processing of innovative materials, the further development of grinding tools and machine concepts as well as an increasing economic and environmental pressure are current challenges in grinding technology. High Performance...
2016 / Fritz Klocke, Sebastian Barth, Patrick Mattfeld -
Effect of L-arginine on Solubility of CO2 in Choline Chloride + Glycerol Based Deep Eutectic Solvents
Abstract In the present study, measurements on the solubility of CO2 based on the pressure drop method in mixtures of (choline chloride (ChCl) + glycerol) + L-arginine at various molar ratios (1:2:0, 1:2:0.1, 1:2:0.2, 1:3:0, 1:3:0.1, 1:3:0.2, 1:4:0, ...
2016 / Fareeda Chemat, Nirmala Gnanasundaram, Azmi Mohd Shariff, Thanabalan Murugesan -
Effect of compressive residual stress generated by plastic preload on fatigue initiation of 6061 Al-alloy
Abstract In this paper the effect of compressive residuals stresses generated by plastic preload on fatigue crack initiation and performed on 6061 Al-alloy finite plate with central hole was studied. Finite element analysis (FEA) was used to...
2016 / M. Benachour, N. Benachour, M. Benguediab -
Applicability of Blasted Blanks for Adaption of Tribological Conditions in Sheet-bulk Metal Forming
Abstract Manufacturing by sheet-bulk metal forming (SBMF) leads to varying stress and strain states that significantly influence the geometrical component accuracy. To improve the product quality, control of the material flow is needed. A suitable...
2016 / Maria Löffler, Kolja Andreas, Ulf Engel, Marion Merklein -
Applications of Residual Stress in Combatting Fatigue and Fracture
Abstract Residual stresses have a significant impact on the propensity for engineering components and structures to undergo fatigue and fracture, with either a positive (life enhancing) or negative (life reducing) effect that is largely dependent on ...
2016 / M N James, D G Hattingh, D Asquith, M Newby, P Doubell -
Assessing the Resilience of LEED Certified Green Buildings
Abstract The Leadership in Energy & Environmental Design (LEED) green building certification program is dedicated to the design of sustainable buildings by incentivizing reductions in energy, water, and building materials consumption, while at...
2016 / Cassandra L. Champagne, Can B. Aktas -
Advanced High Energy Density Secondary Batteries with Multi-Electron Reaction Materials2016 / Renjie Chen, Rui Luo, Yongxin Huang, Feng Wu, Li Li
-
Surface Characterization of Particle Reinforced Aluminum-matrix Composites Finished by Pulsed Electrochemical Machining
Abstract Aluminum matrix composites (AMCs) are difficult to machine conventionally. Pulsed Electrochemical Machining (PECM) is an alternative method to machine AMCs. Metals can be machined without contact, independent of material hardness and...
2016 / Matthias Hackert-Oschätzchen, Norbert Lehnert, André Martin, Gunnar Meichsner, Andreas Schubert -
Understanding Science Centre Engagement in Nurturing Visitor Interest and Curiosity
Abstract Reaching and engaging visitors within exhibitions and throughout the museum environment, recurred as an area of design concern. Using the recent experience of Science Centre Singapore, The Mind Museum Philippines and The Experimentarium...
2016 / Nurhaya Baniyamin, Md. Mizanur Rashid -
Study by Magnetic Barkhausen Noise of a 1020 Steel and 99.9% Nickel Plate
Abstract When a low frequency external variable magnetic field is applied to a ferromagnetic material, a movement of its magnetic domains due to the realignment in the direction of the applied field occurs. This realignment produces a signal which...
2015 / Cynthia Hucailuk, Nicolás Nuñez, Darío Torres -
Finite element analysis to estimate burst pressure of mild steel pressure vessel using Ramberg-Osgood model
Summary Burst pressure is the pressure at which vessel burst/crack and internal fluid leaks. An accurate prediction of burst pressure is necessary in chemical, medical and aviation industry. Burst pressure is a design safety limit, which should not...
2016 / Puneet Deolia, Firoz A. Shaikh -
Numerical Investigation on Nonlinear Vibration Behavior of Laminated Cylindrical Panel Embedded with PZT Layers
Abstract This work investigates the geometrical nonlinear free vibration characteristic of cylindrical composite shell panel embedded with piezoelectric layers. A short circuit configuration (top and bottom layers are grounded i.e. zero potential)...
2016 / Vijay K. Singh, Subrata K. Panda -
Language of CTO interventions – Focus on hardware
Abstract The knowledge of variety of chronic total occlusion (CTO) hardware and the ability to use them represents the key to success of any CTO interventions. However, the multiplicity of CTO hardware and their physical character and the...
2016 / Sundeep Mishra -
Study of hardness and tensile strength of Aluminium-7075 percentage varying reinforced with graphite and bagasse-ash composites
Abstract Waste sugarcane bagasse-ash and graphite utilizing as reinforcement in fabricating of an aluminium alloy (Al-7075) based matrix hybrid composites. The aluminium matrix hybrid composites have been fabricated by stir-casting method at 750 °C. ...
2016 / Mohammed Imran, A.R. Anwar Khan, Sadananda Megeri, Shoaib Sadik -
Plasmene origami2016 / Kae Jye Si, Yi Chen, Wenlong Cheng
-
Linear Stability Analysis and Transient Growth in Steady and Pulsatile Flows in a Constricted Channel
Abstract A three-dimensional direct stability analysis of the flow in a straight channel with a smooth constriction with 50% occlusion is performed. Two-dimensional steady and long-period pulsatile flows are investigated with respect to...
2015 / J.A. Isler, B.S. Carmo -
An experimental study on moisture absorption for jute-epoxy composite with coatings exposed to different pH media
Summary Natural fibres are widely used in the area of composite material applications because of their low density, low cost and acceptable specific mechanical properties. However natural fibres have some disadvantages such as the poor water...
2016 / Radhika Londhe, Ashok Mache, Aparna Kulkarni