Materials engineering topic list of research papers
-
Encapsulation of expansive powder minerals within a concentric glass capsule system for self-healing concrete
Abstract This study presents the application of encapsulated expansive powder minerals (magnesium oxide, bentonite and quicklime) for self-healing of cement-based mortars. A system of concentric glass macrocapsules was used to envelope the expansive ...
2016 / T.S. Qureshi, A. Kanellopoulos, A. Al-Tabbaa -
Fracture Toughness of Explosively Welded Al/Ti Layered Material in Cryogenic Conditions
Abstract In the paper results of comparative analysis of the fracture toughness of explosively welded Al/Ti composite determined for the ambient temperature and for the cryogenic conditions were presented. Testing of mechanical properties of...
2016 / Dariusz Boroński, Maciej Kotyk, Paweł Maćkowiak -
Analogical Understanding of the Ragone plot and a New Categorization of Energy Devices
Abstract The main function of energy devices is to generate power and store energy. The typical storage devices are battery and capacitor; generation devices are internal combustion engine (ICE), gas turbine, and fuel cell. Every kinds of energy...
2016 / Sang C. Lee, Woo Young Jung -
Atomic structures of a liquid-phase bonded metal/nitride heterointerface2016 / Akihito Kumamoto, Naoya Shibata, Kei-ichiro Nayuki, Tetsuya Tohei, Nobuyuki Terasaki, et al.
-
Generation and Assessment of Functional Biomaterial Scaffolds for Applications in Cardiovascular Tissue Engineering and Regenerative Medicine2015 / Svenja Hinderer, Eva Brauchle, Katja Schenke-Layland
-
A model for cathodic blister growth in coating degradation using mesomechanics approach2015 / M. H. Nazir, Z. A. Khan, A Saeed, K. Stokes
-
Performance Analysis and Optimisation of an Oil Natural Air Natural Power Transformer Radiator
Abstract In Power transformers are inevitable components in alternating current generation, transmission, distribution and utilization systems. Lifespan and performance of power transformer are dependent on cooling system employed for dissipation of ...
2016 / S. Anishek, R. Sony, J. Jayadeep Kumar, Pradeep M. Kamath -
Effects of Oil Mist and Air Jet Flushing on Tool Wear in Milling of Ti6Al4V at High Speed
Abstract Titanium alloys have been widely used in the aerospace, biomedical and automotive industries because of their good strength-to-weight ratio and superior corrosion resistance. However, it is very difficult to machine Titanium alloy materials ...
2016 / Eiji Kondo, Yuki Nishimura, Mitsuhiro Nakao -
Study of Shear Dominant Delamination in Thin Brittle-High Ductile Interface
Abstract Thin laminates of Aluminum (Al) foil and Low Density Polyethylene (LDPE) film are essential constituents of food packages where these two substrates are bonded together with a thin layer of LDPE acting as adhesive. Noticeably, Al is a low...
2016 / Md. Shafiqul Islam, Defeng Zhang, Nasir Mehmood, Sharon Kao-Walter -
Influence of Cutting Edge Geometry on Force Build-up Process in Intermittent Turning
Abstract In the intermittent turning and milling processes, during the entry phase the cutting edges are subjected to high impact loads that can give rise to dynamical and strength issues which in general cause tool life reduction. In this study the ...
2016 / A. Agic, O. Gutnichenko, M. Eynian, J.-E. Ståhl -
Investigations of ductile damage in DP600 and DC04 deep drawing steel sheets during punching
Abstract The paper presents numerical and microstructural investigations on a punching process of 2 mm thick steel sheets. The dual phase steel DP600 and the mild steel DC04 exhibit different damage and fracture characteristics. To distinguish the...
2016 / Kerim Isik, Gregory Gerstein, Florian Gutknecht, Till Clausmeyer, Florian Nürnberger, et al. -
Theory and practice of uncommon molecular electronic configurations2015 / Ganna Gryn'ova, Michelle L. Coote, Clemence Corminboeuf
-
Mechanical and Tribological Properties of HVOF-Sprayed (Cr3C2-NiCr+Ni) Composite Coating on Ductile Cast Iron2016 / Marzanna Ksiazek, Lukasz Boron, Marta Radecka, Maria Richert, Adam Tchorz
-
A Novel Efficiency Modeling Method for a DC-DC Converter in the Hybrid Energy Storage System for Electric Vehicles
Abstract Accurate DC-DC converter efficiency model is very important in the energy management optimal control of electric vehicles. In order to establish a reliable efficiency model and improve its accuracy, a novel circuit average modeling method...
2016 / Chun Wang, Hongwen He, Rui Xiong, Yongzhi Zhang -
Adaptation of Transport Infrastructures and Networks to Climate Change
Abstract Climate, with no remaining scientific uncertainties is changing. First impacts of climate change are already felt in several fields, such as transport energy, agriculture and are expected to increase in the near future. Notably, transport...
2016 / Marie Colin, Fabien Palhol, André Leuxe -
The Effect of the Quenching Method on the Deformations Size of Gear Wheels after Vacuum Carburizing2016 / K. Dybowski, J. Sawicki, P. Kula, B. Januszewicz, R. Atraszkiewicz, et al.
-
Ambipolar inverters with natural origin organic materials as gate dielectric and semiconducting layer2015 / Andreas Petritz, Alexander Fian, Eric D. Głowacki, Niyazi Serdar Sariciftci, Barbara Stadlober, et al.
-
Stabilisation of the Absolute Instability of a Flow Past a Cylinder via Spanwise Forcing at Re = 180
Abstract Vortex shedding in the wake of bluff bodies is often an undesired phenomenon which generates unsteady loads, vibrations and fluctuations of the aerodynamic forces. Consequently, the attenuation or suppression of the self-sustained...
2015 / G. Rocco, S.J. Sherwin -
Fabrication and characterization of PZT string based MEMS devices
Abstract String based MEMS devices recently attract world technology development thanks to their advantages over cantilever ones. Approaching to this direction, the paper reports on the micro-fabrication and characterization of free-standing doubly...
2016 / D.T. Huong Giang, N.H. Duc, G. Agnus, T. Maroutian, P. Lecoeur -
Feasibility study of adhesive bonding reinforcement by electrospun nanofibers
Abstract In previous works, the authors showed that the interleaving of an electrospun nylon nanofibrous mat at the interface between adjacent plies of a composite laminate increases the delamination strength. In particular, the nanomat acts a...
2016 / F. Musiari, A. Pirondi, F. Moroni, G. Giuliese, J. Belcari, et al.