Mechanical engineering topic list of research papers
-
The effect of orifice diameter in constant volume chamber to spray characteristics in diesel engine using computational fluid dynamic2016 / A. R. Andsaler, A. Khalid, N. S. A. Abdullah, N. Jaat
-
Design Of Theoretically Optimal Thermoacoustic Cooling Device2016 / Tomáš Tisovský, Tomáš Vít
-
FEM-DEM coupling simulations of the tool wear characteristics in prestressed machining superalloy2016 / Peng Ruitao, Tang Heng, Tang Xinzi, Zhou Zhuan
-
Theoretical Justification of Reducing Soil Adhesion to the Surfaces of the Excavator Working Body at Creation Underground Infrastructure
Abstract It is proposed method of passive cleaning of the excavator working body from adhering soil that practically does not require additional energy. Theoretical studies of the surface temperature effect of the working body on the stickiness of...
2016 / Sergei Kokoshin, Sergey Sozonov, Ivan Shestopalov -
Experimental investigation of flow field in a laboratory-scale compressor
Abstract The inner flow environment of turbomachinery presents strong three-dimensional, rotational, and unsteady characteristics. Consequently, a deep understanding of these flow phenomena will be the prerequisite to establish a state-of-the-art...
2016 / Hongwei Ma, Wei Wei, Xavier Ottavy -
Developing an engineering-statistical model for estimating aerodynamic coefficients of helicopter fuselage
Abstract The design of the geometric shape of a helicopter fuselage poses a serious challenge for designers. The most important parameter in determining the shape of the helicopter fuselage is its aerodynamic coefficients. These coefficients are...
2016 / Hossein Sheikhi, Abas Saghaie -
Hydrodynamics of single-deadrise hulls and their catamaran configurations2016 / Ghazi S. Bari, Konstantin I. Matveev
-
Influence of coupled boundary layer suction and bowed blade on flow field and performance of a diffusion cascade
Abstract Based on the investigation of mid-span local boundary layer suction and positive bowed cascade, a coupled local tailored boundary layer suction and positive bowed blade method is developed to improve the performance of a highly loaded...
2016 / Zhiyuan Cao, Bo Liu, Ting Zhang, Xiqiong Yang, Pingping Chen -
Collaborative optimization for ring-stiffened composite pressure hull of underwater vehicle based on lamination parameters2016 / Bin Li, Yong-jie Pang, Yan-xue Cheng, Xiao-meng Zhu
-
Development of a Mechanistic Force Model for CNC Drilling Process Simulation
Abstract This paper presents a methodology to obtain force information during CNC machining simulation for drilling process especially when the workpiece is inclined to the drill axis or has internal cavities. First, a mechanistic force model is...
2016 / Jianbo Sui, Raja Kountanya, Changsheng Guo -
Analysis of the current density characteristics in through-mask electrochemical micromachining (TMEMM) for fabrication of micro-hole arrays on invar alloy film
Abstract Invar alloy consisting of 64% iron and 36% nickel has been widely used for the production of shadow masks for organic light emitting diodes (OLEDs) because of its low thermal expansion coefficient (1.86×10−6 cm/°C). To...
2016 / Da-som Jin, Kwang-ho Chun, Eun-sang Lee -
Research on ultra-fast vacuum mechanical switch driven by repulsive force actuator2016 / Zhao Yuan, Junjia He, Yuan Pan, Xin Jing, Canyi Zhong, et al.
-
Research progress on ultra-precision machining technologies for soft-brittle crystal materials2016 / Hang Gao, Xu Wang, Dongming Guo, Yuchuan Chen
-
Improved Forecasting Compensatory Control through Kalman Filtering
Abstract The deformation of large thin-walled parts during the cutting processing will decrease the part accuracy, and on-line error forecasting and compensation control is usually used. The forecasting compensatory control (FCC) depending on...
2016 / Xinzhi Wang, Qingzhen Bi, Limin Zhu -
Research on Performance Simulation of Load Isolation Pure Electric Driving Vehicles
Abstract The pure electric vehicles and hybrid vehicles mostly use single energy storage battery pack, which easily cause various battery problems. Moreover, short driving range and inconvenient charging are still the key problems to be solved. A...
2016 / Jichao Hong, Zhenpo Wang, Tiezhu Zhang, Huaixian Yin, Hongxin Zhang, et al. -
Modeling and Experimental Activities on a Small-scale Sliding Vane Pump for ORC-based Waste heat Recovery Applications
Abstract Pumping work in energy recovery units based on Organic Rankine Cycles (ORC) can severely affect the net power output recovered. Nevertheless, in recent years scientific andindustrial communities mainly focused on expanders’ development. In...
2016 / Giuseppe Bianchi, Fabio Fatigati, Stefano Murgia, Roberto Cipollone, Giulio Contaldi -
Effects of Upgraded Cooling System and New Blade Materials on a Real Gas Turbine Performance
Abstract The aim of this paper is to study the effects on the performance of a real heavy-duty gas turbine of two different solutions for enhancing turbine blades thermal resistance. An upgrade of the first stator cooling system and the adoption of...
2016 / Alessandro Innocenti, Leopoldo Marini, Carlo Carcasci -
Energetic Efficiency of an Existing Waste to Energy Power Plant
Abstract The energetic efficiency (EE) of an existing waste to energy plant (WtE) was investigated in the perspective of the waste framework directive 2008/98/EC (WFD). WFD introduced the possibility of considering the WtE a material recovery...
2016 / Francesco Di Maria, Stefano Contini, Gianni Bidini, Antonio Boncompagni, Marzio Lasagni, et al. -
Unknown constrained mechanisms operation based on dynamic interactive control
Abstract In order to operate various constrained mechanisms with assistive robot manipulators, an interactive control algorithm is proposed in this paper. This method decouples motion and force control in the constrained frame, and modifies the...
2016 / Hesheng Wang, Bohan Yang, Weidong Chen -
Study on the Milling Stability of Titanium Alloy Thin-walled Parts Considering the Stiffness Characteristics of Tool and Workpiece
Abstract In order to eliminate the chatter in the milling process of titanium alloy thin-walled parts, the milling dynamic model was established taking the stiffness characteristics of tool and workpiece into consideration. The modal analysis and...
2016 / Chao Sun, Xin Shen, Wei Wang