Mechanical engineering topic list of research papers
-
Optimization of the Performance of a Formula SAE Engine by Means of a Wastegate Valve Electronically Actuated
Abstract The engine and vehicle design in Formula SAE competition has to accomplish a strict regulation. In order to limit the maximum power, an air restrictor of 20mm of diameter is imposed in the intake line. To overcome the limitations caused by...
2016 / Luca Romani, Giovanni Vichi, Alessandro Bianchini, Lorenzo Ferrari, Giovanni Ferrara -
A Metamodel for the Manufacturing Process Information Modeling
Abstract Since the manufacturing process information and their mutual relationship are complex and diverse, the clear and accurate description and modeling of manufacturing process information is a challenge in related study of manufacturing...
2016 / Bin Yang, Lihong Qiao, Zuowei Zhu, Muqi Wulan -
Modal analysis on tire with respect to different parameters
Abstract This paper presents experimental modal analysis of non-rotating tires under different boundary conditions. A test rig with four guides in vertical (radial) direction and two guides in axial direction was designed to support the tire-rim...
2016 / A. Abd_Elsalam, M.A. Gohary, H.A. El-Gamal -
Dynamic Response of Submerged Floating Tunnel in the Flow Field
Abstract With the rapid growth of economy and the continuous improvement of the society, the problem of the crossing channel becomes more and more difficult to be solved. As a new type of transportation facilities, submerged floating tunnel (SFT)...
2016 / Hongsheng Yan, Yuqi Luo, Jianxing Yu -
Design and Application of Flexible Fixture
Abstract The flexible fixture has been applied in many areas because it can adapt to the workpiece shape and size change, such as aircraft integral structure parts manufacturing, and air surface parts manufacturing, aircraft assembly. Due to the use ...
2016 / Hui Li, Weifang Chen, Shengjie Shi -
Collision mitigation and vehicle transportation safety using integrated vehicle dynamics control systems
Abstract The aim of this paper is to investigate the effect of vehicle dynamics control systems (VDCS) on both the collision of the vehicle body and the kinematic behaviour of the vehicle's occupant in case of offset frontal vehicle-to-vehicle...
2017 / Mustafa Elkady, Ahmed Elmarakbi, John MacIntyre, Mohammed Alhariri -
Analytical Modeling of Hydrodynamic Lubrication in a Multiple-reduction Drawing Die
Abstract The hydrodynamic lubrication regime is reported to exist in numerous metal forming applications, such as wire drawing and hydrostatic extrusion, but it has not been achievable in the drawing of large diameter rods due to the relatively low...
2016 / James Lowrie, Gracious Ngaile -
Torque Distribution Control Strategy based on Dynamic Axle Load for 8 In-Wheel Motor Drive Vehicle
Abstract Compared with conventional internal combustion engine vehicle, the vehicle with multi-wheel independent technology has apparent advantages on vehicle dynamics control and driving force distribution. The target system of this study is the...
2016 / WANG Zhifu, WANG Yunzhao, GAO Zhiqiang, GUO Jian -
Ultrasonic Guided Wave Method For Crack Detection In Buried Plastic Pipe2016 / Wan Sofian Wan Hamat, Mohd Fairusham Ghazali, Gigih Priyandoko
-
A review on model updating of joint structure for dynamic analysis purpose2016 / S.N. Zahari, A.A.R. Zakaria, M.S.M. Sani, I. Zaman
-
Wobble Strings: Spatially divided stroboscopic effect for augmenting wobbly motion of string instruments
Abstract Visual stimuli in the form of special lighting effects are often used to provide additional entertainment when musicians perform. Many technologies have been developed to synchronize visual and audio effects; for example, a CMOS camera can...
2016 / Shogo Fukushima, Takeshi Naemura -
Milling Force Modeling: A Comparison of Two Approaches
Abstract This paper evaluates the dependence of cutting force coefficients on milling process parameters including feed per tooth, spindle speed, and radial immersion. Two methods are described for determining the cutting force coefficients: 1) the...
2016 / Mark A. Rubeo, Tony L. Schmitz -
Effect of Cutter Runout on Chatter Stability of Milling Process
Abstract Chatter-free cutting parameter selection is a very important topic in milling process. Thus, numerous researches have been done to predict the stability lobes of milling process. Practical milling process is always influenced by multiple...
2016 / Yingchao Ma, Min Wan, Weihong Zhang -
Multi-objective reliability design optimization of electric multiple unit pantograph geometric parameters2016 / B. Chen, Y. Li, S. Dong, J. Wang
-
Engineering Product and Process Design Changes: A Literature Overview
Abstract Engineering product/process design changes are unavoidable and necessary for improvement & innovation. To capture the maximum market shares, manufacturers have to effectively and efficiently manage engineering changes throughout the...
2016 / Inayat Ullah, Dunbing Tang, Leilei Yin -
An Improved Tolerance Analysis Method Based on Skin Model Shapes of Planar Parts
Abstract Geometric deviations have huge influences on the functional behavior of product, which should be analyzed and properly controlled. Tolerance analysis, as a way to evaluate geometric deviations, is an essential part of product development....
2016 / Zuowei Zhu, Lihong Qiao, Nabil Anwer -
Modeling Flank Wear Progression Based on Cutting Force and Energy Prediction in Turning Process
Abstract Flank wear of cutting tools is often used as the tool life criterion because it has high impact on the diametric accuracy of turning. Accurate prediction of tool wear is important for optimizing tool change and other cutting parameters. In...
2016 / Guicai Zhang, Changsheng Guo -
Design of a Backdrivable Triglide Robot2015 / Natthapong Angsupasirikul, Ratchatin Chancharoen
-
A regenerative supercritical-subcritical dual-loop organic Rankine cycle system for energy recovery from the waste heat of internal combustion engines
Abstract Organic Rankine cycle (ORC) system is considered as a promising technology for energy recovery from the waste heat rejected by internal combustion (IC) engines. However, such waste heat is normally contained in both coolant and exhaust...
2017 / Enhua Wang, Zhibin Yu, Hongguang Zhang, Fubin Yang -
Optimum Performance Enhancing Strategies of the Gas Turbine Based on the Effective Temperatures2016 / Thamir K. Ibrahim, M. M. Rahman, Obed M. Ali, Firdaus Basrawi, Rizalman Mamat