Mechanical engineering topic list of research papers
-
Optimal tightening process of bolted joints2016 / Jean-Michel Monville
-
Mechanical properties and corrosion resistance of some titanium alloys in marine environment2013 / Jennifer Dupuis, M. Chenon, S. Faure, F. Razan, T. Gloriant
-
Effect of the heating surface enhancement on the heat transfer coefficient for a vertical minichannel2016 / Magdalena Piasecka, Kinga Strąk
-
The Potential of Mixtures of Pure Fluids in ORC-based Power Units fed by Exhaust Gases in Internal Combustion Engines
Abstract ORC represents an effective challenge in the waste heat recovery from ICEs. In spite of technological aspects, its thermodynamic design still deserves attention. Mixtures of pure fluids show interesting properties able to improve exergetic...
2016 / D. Di Battista, R. Cipollone, C. Villante, C. Fornari, M. Mauriello -
Homotopy between exact coherent structures in shear flows2016 / Masato Nagata
-
Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) And direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools2016 / S. A. C. Ghani, M. H. Zakaria, W. S. W. Harun, Z. Zaulkafilai
-
A Study on the Fluid Mechanics Performance of Aquatics Equipment2015 / Jian Jiao, Shugang Zhang
-
Effect of Water Injection into Exhaust Manifold on Diesel Engine Combustion and Emissions
Abstract In this study, an experimental investigation was conducted to assess the combustion and emissions of a single cylinder diesel engine using water injection in the exhaust manifold. Water is injected into the exhaust manifold and by opening...
2016 / M. Nour, H. kosaka, Ali K. Abdel-Rahman, M. Bady -
Study on the Dispersion of 1.5mm & 4mm Chopped Carbon Fiber in Triethyl Phosphate2016 / Rui Hu, Xuanyu Wang, Zhilong Liu
-
Investigation of the Stress-Strain State of Seamless Pipe in the Initial State2015 / Jerzy Malachowski, Volodymyr Hutsaylyuk, Petr Yukhumets, Roman Dmitryenko, Grigorii Beliaiev, et al.
-
Numerical solution of Williamson fluid flow past a stretching cylinder and heat transfer with variable thermal conductivity and heat generation/absorption2016 / M. Y. Malik, M. Bibi, Farzana Khan, T. Salahuddin
-
Gasoline Direct Injection: An Efficient Technology
Abstract Most of the researchers wanted to work with diesel engine because of complexity in the gasoline engine. Author tried to review gasoline direct injection (GDI) a new technology in the gasoline engine with the objective to motivate the...
2016 / S.P. Chincholkar, J.G. Suryawanshi -
Parametric Study of Defect Detection in Pipes with Bend Using Guided Ultrasonic Waves2016 / Jin Jack Tan, Xin Wang, Ningqun Guo, Jee Hou Ho
-
The Influence of Preload on the Work of Angular Contact Ball Bearings2016 / Jarosław Kaczor, Andrzej Raczyński
-
Modelling and Testing of the Piezoelectric Beam as Energy Harvesting System2016 / Andrzej Koszewnik, Krzysztof Wernio
-
Analysis of the effect of an obstacle on the wind energy potential2016 / N. Amahjour, A. Khamlichi
-
Tools and Strategies for Grinding of Riblets on Freeformed Compressor Blades
Abstract A major goal in the design of turbomachinery is the increase of efficiency. To attain this increase, the flow losses must be reduced. A substantial proportion of the losses is generated by skin friction between compressor blades and working ...
2016 / B. Denkena, T. Grove, T. Krawczyk -
Control techniques of tilt rotor unmanned aerial vehicle systems: A review
Abstract The tilt rotor unmanned aerial vehicle (TRUAV) exhibits special application value due to its unique rotor structure. However, varying dynamics and aerodynamic interference caused by tiltable rotors are great technical challenges and key...
2016 / Zhong Liu, Yuqing He, Liying Yang, Jianda Han -
Kinetics of the coefficient of friction of elastomers2014 / Qiang Li, Andrey Dimaki, Mikhail Popov, Sergey G. Psakhie, Valentin L. Popov
-
Numerical Investigation of Transient Temperature and Residual Stresses in Thin Dissimilar Aluminium Alloy Plates
Abstract The purpose of the present investigation is to assess transient temperature and residual stresses in Gas Metal Arc Welding (GMAW) of dissimilar aluminium alloys (AA). A moving heat source model based on Goldak's double – ellipsoid heat flux ...
2016 / Tapas Bajpei, H. Chelladurai, Mohd. Zahid Ansari