Mechanical engineering topic list of research papers
-
Experimental investigation on correlation of corona-induced vibration and audible noise from DC conductor2016 / Xuebao Li, Xiang Cui, Donglai Wang, Tiebing Lu, Xingming Bian, et al.
-
Improvement Of Tools Durability By Application Of Hybrid Layer Of Nitrided/PECVD Coating.2015 / Z. Gronostajski, M. Kaszuba, H. Paschke, T. Zakrzewski, G. Rogaliński
-
Proposition of an Approach Applicable During the Design Process of Working Equipment to Identify Potential Hazards for Workers
Abstract The work of product designers has to evolve in phase with the improvements made to technology and changes in regulations. They have to work on different aspects of a product such as its technological, legal, environmental and occupational...
2016 / Nicholas de Galvez, Jacques Marsot, Patrick Martin, Ali Siadat, Alain Etienne -
Numerical simulation of mixed convection heat transfer of nanofluid in a double lid-driven cavity using lattice Boltzmann method
Abstract In this study, mixed convection heat transfer of water-Cu nanofluid in a double lid-driven cavity has been analyzed by lattice Boltzmann method. The double lid-driven are insulated and the side walls have sinusoidal temperature...
2016 / Ahmad Reza Rahmati, Ali Rayat Roknabadi, Mahmoud Abbaszadeh -
Multi-objective flexible job-shop scheduling problem using modified discrete particle swarm optimization2016 / Song Huang, Na Tian, Yan Wang, Zhicheng Ji
-
Study on TBCs insulation characteristics of a turbine blade under serving conditions
Abstract It is a key problem to study thermal barrier coatings (TBCs) insulation and followed stresses for the coated blade. This article focused on the insulation characteristics of TBCs by coupling heat transfer and flow with a multilayer blade....
2016 / J.H. Liu, Y.B. Liu, X. He, L. Liu -
Inverse heat transfer problem in digital temperature control in plate fin and tube heat exchangers2012 / Dawid Taler, Adam Sury
-
Build and Test Research of a Coaxial Hybrid-power Gas Engine Heat Pump System Based on LiFePO4 Battery
Abstract Power batteries of hybrid-power gas engine heat pump (HPGHP) often encounter frequent charge and discharge operations, which have an adverse effect on nature gas conversion efficiency of system. In order to improve the dynamic efficiency...
2016 / Wenxiu Ji, Liang Cai, Qinkun Men, Gaofeng Sun, Xiaosong Zhang -
Capacity and Behaviour on One-way Cycle Tracks of Different Widths
Abstract The main objective of this study is to examine how widths of cycle tracks influence the behaviour, flow and capacity of bicycle traffic. Empirical data has been collected by video observations at 8 different cycle tracks...
2016 / Poul Greibe, Thomas Skallebæk Buch -
Additive Manufacturing of Fixture for Automated 3D Scanning – Case Study
Abstract Additive technologies have their place in process of making new parts, from idea to final product. First step in all additive manufacturing is the development of a 3D CAD model which can be made by 3D modeling in any CAD software or 3D...
2016 / Nino Krznar, Ana Pilipović, Mladen Šercer -
Effect of Flux Composition on the Percentage Elongation and Tensile Strength of Welds in Submerged Arc Welding2016 / Brijpal Singh, Zahid A. Khan, A.N. Siddiquee, Sachin Maheswari, Satish Kumar Sharma
-
Pore-scale numerical modeling of relative permeability curves for CO2–oil fluid system with an application in immiscible CO2 flooding2016 / S. Mahmoudi, O. Mohammadzadeh, A. Hashemi, S. Kord
-
Research on theoretical optimization and experimental verification of minimum resistance hull form based on Rankine source method2015 / Bao-Ji Zhang, Zhu-Xin Zhang
-
Applications of Chaotic Dynamics in Robotics2016 / Xizhe Zang, Sajid Iqbal, Yanhe Zhu, Xinyu Liu, Jie Zhao
-
The Development of the Flat-Knitted Shaped Uppers based on Ergonomics2015 / Zhiwen Lu, Gaoming Jiang, Honglian Cong, Xi Yang
-
Research and development of a self-centering clamping device for deep-water multifunctional pipeline repair machinery
Abstract When multifunctional pipeline repair machinery (MPRM) is used in the deep sea area, it is difficult to grip the pipeline and ensure concentricity between the cutter heads and the pipeline during its operation. In view of this, a new system...
2016 / Liquan Wang, Shiqing Guo, Haixia Gong, Xianchao Shang -
Effect of hydrogen-diesel dual-fuel usage on performance, emissions and diesel combustion in diesel engines2016 / Y. Karago z, T. Sandalc, L. Yu ksek, A. S. Dalk l c, S. Wongwises
-
Management of linear quadratic regulator optimal control with full-vehicle control case study2016 / R. Tchamna, M. Lee, I. Youn, V. Maxim, K. Zidek, et al.
-
Parameter optimization in milling of glass fiber reinforced plastic (GFRP) using DOE-Taguchi method2016 / Sachin Ghalme, Ankush Mankar, Y. J. Bhalerao
-
Closed Loop Optimal Control of a Stewart Platform Using an Optimal Feedback Linearization Method2016 / Hami Tourajizadeh, Mahdi Yousefzadeh, Ali Tajik