Mechanical engineering topic list of research papers
-
In-depth Study on The Solubility of Elemental Sulfur in Sour Gas Mixtures Based on The Chrastil’s Association Model
Abstract Accurately predicting the solubility of elemental sulfur in sour gas mixtures is a primary task. As a current and widely-used model on the solubility of elemental sulfur in sour gas mixtures, Chrastil's association model has a big error in...
2016 / Qiao Wang, Xiao Guo, Runxi Leng -
Thermal bridges in vacuum insulation panels at building scale2016 / Francesco Isaia, Stefano Fantucci, Alfonso Capozzoli, Marco Perino
-
The Influence Of Repair Welded Joint On The Life Of Steam Pipeline Made Of Cr-Mo Steel Serviced Beyond The Calculated Working Time2015 / A. Zieliński, G. Golański
-
A study on the effect of flat plate friction resistance on speed performance prediction of full scale2015 / Dong-Woo Park
-
Boundary interactions of rough non-Gaussian surfaces2016 / M. Leighton, N. Morris, M. Gore, R. Rahmani, H. Rahnejat, et al.
-
Chip inward curl and its influence on dimensional accuracy in groove cutting with a novel restricted contact tool2016 / B. Wang, J. Zhang, W. Zhou, W. Xia, W. J. Deng
-
A prognostics approach based on the evolution of damage precursors using dynamic Bayesian networks2016 / E. Rabiei, E. L. Droguett, M. Modarres
-
Thermal Environment Dynamic Simulation of Double Skin Façade with Middle Shading Device in Summer
Abstract Double-skin facade (DSF) can be thermal insulation either in summer or winter. While building shading devices can reduce the solar radiation heat gain through windows effectively, save building energy consumption and improve indoor thermal...
2016 / Hua Yang, Ying Zhou, Feng-yun Jin, Xing Zhan -
Experimental investigations into the impact of the void fraction on the condensation characteristics of R134a refrigerant in minichannels under conditions of periodic instability2011 / Waldemar Kuczyński, Henryk Charun
-
Measurements of the laminar burning velocity for propane: Air mixtures2016 / M. S. Ebaid, K. J. Al-Khishali
-
Stochastic Tool Wear Prediction for Sustainable Manufacturing
Abstract To provide scientific support for decision-making in critical applications such as maintenance scheduling and inventory management, tool wear monitoring and service life prediction are of significance to achieving sustainable manufacturing. ...
2016 / Peng Wang, Robert X. Gao -
Evaluation of the possibility of the sewage sludge gasification gas use as a fuel2016 / Sebastian Werle, Mariusz Dudziak
-
The Potential and Approach of Flue Gas Waste Heat Utilization of Natural Gas for Space Heating
Abstract After the combustion of natural gas, the flue gas contains large amounts of water vapor. The latent heat of the water vapor in the flue gas account for 10%-11% of the lower heating value of natural gas, that is, if the condensing heat of...
2016 / Xiling Zhao, Lin Fu, Weixing Yuan, Feng Li, Qingsheng Li -
Nonlinear analysis of a rub-impact rotor with random stiffness under random excitation2016 / Y. Yang, Y. Wang, Z. Gao
-
Experimental investigation of a ground-coupled desiccant assisted air conditioning system
Abstract In a pilot installation at Hamburg University of Technology the coupled operation of an open cycle desiccant assisted air conditioning system with borehole heat exchangers is investigated. The paper presents experimental data recorded...
2016 / Arne Speerforck, Gerhard Schmitz -
Research on cutting mechanics of window bit cutting teeth2016 / C. Kong, Z. Liang, D. Zhang, R. Cai
-
Water distribution characteristics of spray nozzles in a cooling tower2015 / Pavol Vitkovic
-
Hull-form optimization of a container ship based on bell-shaped modification function2015 / Hee Jong Choi
-
Numerical investigation on turbulent forced convection and heat transfer characteristic in a square channel with discrete combined V-baffle and V-orifice
Abstract Turbulent forced convection, heat transfer and performance improvement in a square channel with discrete combined baffles (DCB), which combined V-baffle and V-orifice, are investigated numerically. The influences of the flow blockage ratios ...
2016 / Amnart Boonloi, Withada Jedsadaratanachai -
Analysis of Influence of Screw Compressor Construction Parameters and Working Condition on Rotor Temperature Fields
Abstract A simulation model that can calculate rotor temperature fields in the working mode using numerical methods was designed and presented. An analysis of screw compressor construction parameters and working condition influence on rotors...
2016 / T.N. Mustafin, R.R. Yakupova, A.V. Burmistrova, M.S. Khamidullina, I.G. Khisameeva