Mechanical engineering topic list of research papers
-
Research on knowledge support technology for product innovation design based on quality function knowledge deployment2016 / K. Zhang, W. Zhao, J. Wang, L. Chen, C. Wang, et al.
-
Entropy generation during fluid flow in sharp edge wavy channels with horizontal pitch2016 / H. M. Bahaidarah
-
A simulation study on performance evaluation of single-stage LiBr–H2O vapor absorption heat pump for chip cooling
Abstract The growth of Lithium Bromide–Water (LiBr–H2O) absorption based heat pump is encouraged for the necessity of extracting high heat from the electronic chips. This paper presents a simulation study of single-stage LiBr–H2O vapor absorption...
2016 / Manu Thimmaiah, T.K. Chandrashekar -
Credibility in evaluating on-line wear-depth detection of self-lubricating spherical plain bearings2016 / W. Li, Z. Hu, Y. Yang, X. Qi, H. Zhou
-
Numerical study of aerodynamic characteristics of FSW aircraft with different wing positions under supersonic condition
Abstract This paper investigates the influence of forward-swept wing (FSW) positions on the aerodynamic characteristics of aircraft under supersonic condition (Ma =1.5). The numerical method based on Reynolds-averaged...
2016 / Juanmian Lei, Shuai Zhao, Suozhu Wang -
Product design pattern based on big data-driven scenario2016 / C. Yu, L. Zhu
-
Electric load simulator system control based on adaptive particle swarm optimization wavelet neural network with double sliding modes2016 / C. Wang, Y. Hou, Q. Gao, R. Hou, T. Deng
-
Process Types of Customisation and Personalisation in Design for Additive Manufacturing Applied to Vascular Models
Abstract Manufacturing companies face high demand for products that fulfil individual customer desires. Recent improvements in additive manufacturing (AM) enable the fabrication of customer-specific components of a product. This...
2016 / Johanna Spallek, Dieter Krause -
The coupling effects of the missile launcher and the ground in vehicle-mounted missile erecting2016 / X. Wei, Y. Jiang, W. Zeng, X. Pan
-
Gas turbine performance enhancement via utilizing different integrated turbine inlet cooling techniques
Abstract Regions that experience ambient temperatures rising during hot seasons have significant losses and impacts on both output power and efficiency of the gas turbine. When the ambient temperature increases, the air mass flow rate decreases, and ...
2016 / Alaa A. El-Shazly, Mohamed Elhelw, Medhat M. Sorour, Wael M. El-Maghlany -
Solution of analytical model for fuel spray penetration via homotopy perturbation method
Abstract The present paper attempts to solve equations in the initial stage and the two-phase flow regime of fuel spray penetration using the HPM-Padé technique, which is a combination of the homotopy perturbation method (HPM) and Padé...
2016 / B. Jalilpour, S. Jafarmadar, D.D. Ganji, M.M. Rashidi -
Experimental Study on Adsorption Refrigeration System with Stratified Storage – Analysis of Storage Discharge Operation
Abstract Intergrating heat recovery can improve the coefficient of performance (COP) of adsorption refrigeration system, and stratified storage enables recovery of a large fraction of the total heat that can be recovered in an ideal cycle. In some...
2016 / Weilin Li, Chirag Joshi, Peng Xu, Ferdinand P. Schmidt -
Analysis of vehicle static steering torque based on tire-road contact patch sliding model and variable transmission ratio2016 / B. Ma, Y. Yang, Y. Liu, X. Ji, H. Zheng
-
Multiresponse Optimization of Edm Process with Nanofluids Using Topsis Method and Genetic Algorithm2016 / S. Prabhu, B. K. Vinayagam
-
System Implementation of Speed Restriction While Developing the Force Compensation Systems
Abstract The problems arising at operation of force compensating systems were considered. The necessity to apply additional speed restriction systems was proved. Two approaches to implement speed restriction systems were proposed due to application...
2016 / D.Yu. Bogdanov, G.Ya. Pyatibratov, A.B. Bekin -
Parameter design and performance analysis of shift actuator for a two-speed automatic mechanical transmission for pure electric vehicles2016 / J. Hu, H. Ran, T. Pang, Y. Zhang
-
Investigation of Friction and Wear Mechanisms of TiAlV Coated Carbide Against Ti6Al4V Titanium Alloy Using Pin-On-Disc Tribometer2016 / Wit Grzesik, Joanna Małecka, Zbigniew Zalisz, Krzysztof Zak, Piotr Niesłony
-
Flow of a Visco-Elastic Fluid Past a Porous Plate in a Rotating System2013 / M. Guria, R.N. Jana
-
Failure analysis and structure optimization of the connecting thread of driving shaft in positive displacement motor2016 / X. Zhu, D. Lin, J. Li
-
Some Approaches to the Rolling Wheels’ Dynamics Modelling in the Weight-in-Motion Problem2013 / Alexander Grakovski, Yuri Krasnitski, Igor Kabashkin, Victor Truhachov