Mechanical engineering topic list of research papers
-
The impact of electrochemical assistance on the microturning process2016 / Sebastian Skoczypiec, Marcin Grabowski, Adam Ruszaj
-
Research on torsional capacity of composite drive shaft under clockwise and counter-clockwise torque2015 / Y. Hu, M. Yang, J. Zhang, C. Song, W. Zhang
-
Dynamic Performance of the Shading-type Building-Integrated Photovoltaic Claddings
Abstract Application of the shading-type Building-Integrated Photovoltaic (BIPV) claddings is one of the most effective approaches for reducing energy use in buildings and making buildings environment-friendly. PV modules are used as external...
2015 / Liangliang Sun, Wenju Hu, Yanping Yuan, Xiaoling Cao, Bo Lei -
Evaluation and optimal design of supersonic nozzle for laser-assisted oxygen cutting of thick steel sections2016 / Chi Zhang, Peng Wen, Yueming Yuan, Xuejun Fan
-
Evaluation of the Effects of a Twin Spark Ignition System on Combustion Stability of a High Performance PFI Engine
Abstract The continuous demand for high performances and low emissions engines leads the engine manufactures to set the operating range of combustion devices near to their stability limit. Combustion stability is closely related to the formation of...
2015 / Claudio Forte, Gian Marco Bianchi, Enrico Corti, Stefano Fantoni -
Thin hybrid linearly piezoelectric junctions
Abstract We extend our previous study [1] devoted to thin linearly piezoelectric junctions to the case when the elastic, piezoelectric and dielectric coefficients of the junction are not of the same order of magnitude.
2016 / Patcharakorn Viriyasrisuwattana, Christian Licht, Somsak Orankitjaroen, Thibaut Weller -
Optimal design for fractional-order active isolation system2015 / H. You, Y. Shen, S. Yang
-
Design of asymmetric flexible micro-gripper mechanism based on flexure hinges2015 / X. Qingsong
-
CFD Analysis of 2-Stroke Engines
Abstract 1d and 3d CFD simulation is a standard engineering practice on 4-stroke engines. However, the application to the 2-Stroke cycle is not so trivial, in particular the transition from detailed CFD-3d analyses to simplified 1d engine...
2015 / Tommaso Savioli -
Nonlinear Vibration of Gears With Tooth Surface Modifications2013 / Tugan Eritenel, Robert G. Parker
-
Parametric Study of Injection Rates With Solenoid Injectors in an Injection Quantity and Rate Measuring Device2015 / Stephen Busch, Paul C. Miles
-
Aerodynamic Study of a Tricycle Wheel Subsystem for Drag Reduction2013 / Thomas Driant, Lakhdar Remaki, Hachimi Fellouah, Stéphane Moreau, Alain Desrochers
-
Analytical Solutions of a Symmetrical Dynamic Crack Model of Bridging Fibers in Unidirectional Composites2013 / Nianchun Lü, Yunhong Cheng, Yuntao Wang, Jin Cheng
-
Application and Analysis of Force Control Strategies to Deburring and Grinding2013 / Frank Domroes, Carsten Krewet, Bernd Kuhlenkoetter
-
A new landing impact attenuation seat in manned spacecraft biologically-inspired by felids
Abstract When manned spacecraft comes back to the earth, it relies on the impact attenuation seat to protect astronauts from injuries during landing phase. Hence, the seat needs to transfer impact load, as small as possible, to the crew. However,...
2015 / Hui Yu, Zhiqiang Zhang, Hua Liu, Jialing Yang, Lili Wang, et al. -
A Solid Modeler Based Engagement Model for 5-axis Ball End Milling
Abstract 5-axis sculptured surface milling is a difficult machining process to model due to the complex geometrical engagement between the workpiece and the cutter. Due to the complexity of the process, the engagement cannot be found analytically...
2015 / I.E. Yigit, S. Ehsan Layegh K., Ismail Lazoglu -
A Quantitative Flow Visualization Technique for On-site Sport Aerodynamics Optimization
Abstract Aerodynamics plays a crucial role in many speed sports, where races are often won by fractions of a second. A thorough understanding of the flow field around an athlete is of paramount importance to optimize the athletes’ posture, garment...
2015 / Andrea Sciacchitano, Giuseppe Carlo Alp Caridi, Fulvio Scarano -
Prediction of the Evolution of the Surface Roughness in Dependence of the Lubrication System for Cold Forming Processes2015 / Peter Groche, Philipp Kramer, Sebastian Zang, Vladimir Rezanov
-
CFD Investigation on the Aerodynamic Interferences between Medium-solidity Darrieus Vertical Axis Wind Turbines
Abstract The present study contributes to understand physical mechanisms involved in an achievable power enhancement by setting vertical axis wind turbines in close proximity. The turbines are straight-bladed Darrieus micro-turbines characterized by ...
2015 / Simone Giorgetti, Giulio Pellegrini, Stefania Zanforlin -
Numerical Evaluation Of Effective Thermal Properties For Materials With Variable Porosity2016 / P. Staňák, J. Sládek, V. Sládek, S. Krahulec