Mechanical engineering topic list of research papers
-
Modeling Hysteresis with Inertial-Dependent Prandtl-Ishlinskii Model in Wide-Band Frequency-Operated Piezoelectric Actuator2012 / Vahid Hassani, Tegoeh Tjahjowidodo, Albert D. Soetarto
-
An Adaptive Test Sheet Generation Mechanism Using Genetic Algorithm2012 / Huan-Yu Lin, Jun-Ming Su, Shian-Shyong Tseng
-
Limits and Optimization of Power Input or Output of Actual Thermal Cycles2013 / Emin Açıkkalp, Hasan Yamık
-
Genetic Algorithm Applied to the Eigenvalue Equalization Filtered-x LMS Algorithm (EE-FXLMS)2008 / Stephan P. Lovstedt, Jared K. Thomas, Scott D. Sommerfeldt, Jonathan D. Blotter
-
Fisheye-Lens-Based Visual Sun Compass for Perception of Spatial Orientation2012 / Liang Wang, Fuqing Duan, Ke Lv
-
Modeling of Homogeneous Mixture Formation and Combustion in GDI Engine with Negative Valve Overlap2013 / M. K. Lalith, Akshay Dinesh, S. Unnikrishnan, Akhil Radhakrishnan, S. Srihari, et al.
-
Development of a Refined Rollover Model That Recognizes the Effects of Suspension and Tire Deformation2013 / Xiaowen Song, Jie Li, Aiqun Xu
-
An Improved Model for Headway-Based Bus Service Unreliability Prevention with Vehicle Load Capacity Constraint at Bus Stops2012 / Weiya Chen, Chunhua Yang, Fenling Feng, Zhiya Chen
-
Ride comfort evaluation for road vehicle based on rigid-flexible coupling multibody dynamics
Abstract In the present research two different whole vehicle multibody models are established respectively, including rigid and rigid-flexible coupling multibody vehicle models. The former is all composed by rigid bodies while in the later model,...
2013 / Guangqiang Wu, Guodong Fan, Jianbo Guo -
Reliability Testing Procedure for MEMS IMUs Applied to Vibrating Environments2010 / Giorgio De Pasquale, Aurelio Somà
-
A New Corrosion Sensor to Determine the Start and Development of Embedded Rebar Corrosion Process at Coastal Concrete2013 / Chen Xu, Zhiyuan Li, Weiliang Jin
-
Bilinear load-deflection model of fiber-reinforced polymer-concrete composite beam with interface slip2015 / J. Wang, X. Zou, Y. Feng
-
The Badaling 1MW Parabolic Trough Solar Thermal Power Pilot Plant
Abstract In order to master the design, integration and operation technology of parabolic trough solar thermal power (PTSTP) plant and lay a solid foundation for the future development of large-scale PTSTP station, China sets up a research project...
2015 / Ershu Xu, Dongming Zhao, Hui Xu, Shidong Li, Zhiqiang Zhang, et al. -
Trajectory-Based Road-Geometry and Crash-Risk Estimation with Smartphone-Assisted Sensor Networks2014 / Dongwook Lee, Ilmin Kim, Minsoo Hahn
-
Application of Multiscale Fiber Optical Sensing Network Based on Brillouin and Fiber Bragg Grating Sensing Techniques on Concrete Structures2012 / Xuefeng Zhao, Jie Lu, Ruicong Han, Xianglong Kong, Yanhong Wang, et al.
-
Bridge Assessment and Health Monitoring with Distributed Long-Gauge FBG Sensors2013 / Chunfeng Wan, Wan Hong, Jianxun Liu, Zhishen Wu, Zhaodong Xu, et al.
-
Robust Missing Traffic Flow Imputation Considering Nonnegativity and Road Capacity2014 / Huachun Tan, Yuankai Wu, Bin Cheng, Wuhong Wang, Bin Ran
-
Coordinated Charging Strategy for Electric Taxis in Temporal and Spatial Scale2015 / Yuqing Yang, Weige Zhang, Liyong Niu, Jiuchun Jiang
-
Optimization of Multi Plate Friction Clutch for Maximum Torque Transmitting Capacity Using Uniform Wear Theory
Abstract Optimization is the art of obtaining the best results under given circumstances. In design, construction and maintenance of any engineering system, the ultimate goal is either to minimize the effort required or to maximize the desired...
2014 / Animesh Agrawal, Ajay Kumar Verma, Siddharth Jaiswal, Ashutosh Pandey, Pratik Pandya, et al. -
A novel stepwise method to predict ultimate strength reduction in offshore structures with pitting corrosion2015 / S. Rahmdel, K. Kim, S. Kim, S. Park