Mechanical engineering topic list of research papers
-
The analysis of the flow of a micropolar fluid between two orthogonally moving porous disks with counter rotating directions2013 / Yina Sun, Xinhui Si, Liancun Zheng, Yanan Shen, Xinxin Zhang
-
Research on Design Information Management System for Leather Goods
Abstract The idea of setting up a design information management system of leather goods was put forward to solve the problems existed in current information management of leather goods. Working principles of the design information management system...
2012 / Lei Lu, Wen-li Peng -
Study on Barriers and Countermeasures of Technological Innovation of Ecological Service Function Assessment of Urban Greenbelt
Abstract As the main body of the natural productivity, the urban greenbelt, an irreplaceable comprehensive ecological service system, plays a leading role in beautifying the urban appearance, improving the quality of the urban ecological...
2012 / Wu Wenting, Zhao Hengyu, Ren Yi, Shen Dan, Zhang Yi -
Regulating Characteristics Analysis of Boiler Feed-water Pump when 600MW Unit Sliding-pressure Operating
Abstract According to the characteristics of utility-type generator set in variable load sliding-pressure operation, the paper comprehensively analyzes the features of feed-water system, in which variable-speed main feed-water and power frequency...
2012 / Hu Si-ke, Gao Hui-fen, Jia Xue-jing -
Research on the characteristics of a novel solar drying system and its application
Abstract In this paper, a novel device is designed to connect with solar energy collector, and it can also be connected to domestic solar water heater to effectively use excess energy of the solar water heater. The device mainly consists of...
2012 / Jiang Wu, Lili Zhao, Ning Xie, Lu Gao, Wen Gao, et al. -
Effect of Turbulence Intensity on the Performance of an Offshore Vertical Axis Wind Turbine
Abstract Offshore wind energy is one of the most competitive renewable energy resources available to us, which until now been under- exploited. Most of the problems associated with wind farm installation like land acquisition, low wind conditions...
2015 / M. Salman Siddiqui, Adil Rasheed, Trond Kvamsdal, Mandar Tabib -
Laser Scanner Stage On-The-Fly Method for ultrafast and wide Area Fabrication
Abstract This paper presents an on-the-fly method to synchronize a laser galvanometer scanner and a linear stage for fast and wide area fabrication. The location and velocity information of a linear stage is transferred to the galvanometer scanner...
2011 / Kyunghan Kim, Kwangho Yoon, Jeong Suh, Jaehoon Lee -
Numerical Research About the Internal Flow of Steam-jet Vacuum Pump: Evaluation of Turbulence Models and Determination of the Shock-mixing Layer
Abstract Steam-jet vacuum pump is widely used in a range of applications. This paper evaluated the performance of four well-known turbulence models for predicting and understanding the internal flow of a steam-jet vacuum pump first. With the help of ...
2012 / Jingliang Dong, Xiaodong Wang, Jiyuan Tu -
Investigation on Effect of Tool Forces and Joint Defects During FSW of Polypropylene Plate
Abstract Friction Stir Welding (FSW) is a solid-state method of joining thermoplastic materials. In this investigation, an attempt was made to join the polypropylene plate of 10mm thickness with different tool pin profiles (square, triangular,...
2012 / K. Panneerselvam, K. Lenin -
Contact Analysis on Large Negative Clearance Four-point Contact Ball Bearing
Abstract Based on the theory of Hertz Contact, this paper presents a contact analysis method for large negative clearance four-point contact ball bearing. Take turntable bearing 3-645K for example, normal contact stresses between steel ball and...
2012 / You Hui-yuan, Zhu Chun-xi, Li Wu-xing -
An Improved Evaluation Method based on Cloud Models for Situation Consistency within the Battlefield of Joint Operations
Abstract To improve rationality and veracity of situation consistency assessment in battlefield and deal with the conversion from qualitative remark to quantitative evaluation effectively in evaluation, the improved assessment Method of Cloud...
2012 / Fan Lin-jun, Ling Yun-xiang, Liao Liang-cai, Li Ben-xian -
Assembly and Simulation analysis of Shear-sheet Machine Based on Pro/E
Abstract A design platform used for entity parametric modeling and assembly of the shear-sheet machine is introduced based on Pro/Engineer software.Using parametric modeling, we establish each parts of shear-sheet machine.Using module assembly of...
2011 / Yanjun Xiao, Jinling Zhang, Baoshuang Yao, Yuming Guan -
Stress Analysis for Steel Plate with Multilayered CFRP under Uniaxial Loading
Abstract The objective of this study is to develop a new stress analysis method for a steel plate with multi-layered CFRPs under uniaxial loading. In the method, strains in each layer are considered to be state variables in the first order...
2011 / Takeshi Miyashtia, Masatsugu Nagai -
Software Evaluation Criteria for Rapid Factory Layout Planning, Design and Simulation
Abstract The objective of this paper is to specify functional requirements on software for rapid factory planning and design in a digital factory context. In comparison with other studies that focus on particular aspects of layout development, this...
2012 / N. Shariatzadeh, G. Sivard, D. Chen -
Bending Analysis of Folded Laminated Plates by the FSDT Meshfree Method
Abstract A meshfree method is developed in this paper to study the flexure behavior of folded laminated plates. A folded laminated plate is considered as an assembly of laminates. Based on the first-order shear deformation theory (FSDT) and the...
2011 / L.X. Peng, K.M. Liew, S. Kitipornchai -
Can High–Speed Trains Run Faster and Reduce Energy Consumption?
Abstract Increasing the speed at which a train can run on downward slopes through the effect of the force of gravity and the inertia of the train could involve: a reduction in travel time whilst also reducing energy consumed (due to reduced use of...
2012 / Ignacio González–Franco, Alberto García–Álvarez -
Investigating road safety issues through a microsimulation model
Abstract Some papers have been recently presented (Cunto and Saccomanno, 2007; Cunto and Saccomanno, 2008; Saccomanno et al., 2008) on the potential of traffic microsimulation for the analysis of road safety. In particular, studies have confirmed...
2011 / Vittorio Astarita, Vincenzo Giofré, Giuseppe Guido, Alessandro Vitale -
The Uncertainty of Drivers’ Gap Selection and its Impact on the Fundamental Diagram
Abstract Time gap, defined as the time difference between the departure of the leading vehicle and the arrival of the following at the designated test point, is of great importance for both microscopic and macroscopic traffic modeling. In this...
2013 / Xinkai Wu, Henry X. Liu -
Computer Simulation and Experimental Study of a Sequential Electrochemical - Electrodischarge Machining Process
Abstract The paper presents description of the ECMM and EDMM and the conception of combination these processes into single sequential process. The proposed method gives possibility to minimize disadvantages and emphasizes advantages of the...
2013 / S. Skoczypiec, K. Furyk, A. Ruszaj -
Monocular Camera/IMU/GNSS Integration for Ground Vehicle Navigation in Challenging GNSS Environments2012 / Tianxing Chu, Ningyan Guo, Staffan Backén, Dennis Akos