Mechanical engineering topic list of research papers
-
The Optimum Structural Design for Spiral Case in Hydraulic Turbine
Abstract According to the design principle of the spiral case, the wrap angle is set at 245 degrees based on the basic parameters of the hydraulic turbine, and the hydraulic calculation of the spiral case is taken on, then the size of each part is...
2011 / Liying Wang, Dehua Wei -
Performance Comparative Analysis of Three Different CSP Technologies Integrated with Gas Turbine Cogeneration Systems in Saudi Arabia
Abstract The present work provides an investigation of the technical and economic feasibility of integrating Concentrating Solar Power (CSP) technologies with cogeneration gas turbine systems that are progressively being installed in Saudi Arabia....
2015 / Esmail M.A. Mokheimer, Yousef N. Dabwan, Mohamed A. Habib -
Process-scheme-driven automatic construction of NC machining cell for aircraft structural parts
Abstract In order to enhance the NC programming efficiency and quality of aircraft structural parts (ASPs), an intelligent NC programming pattern driven by process schemes is presented. In this pattern, the NC machining cell is the minimal...
2013 / Shulin Chen, Guolei Zheng, Min Zhou, Baorui Du, Hongzhen Chu -
Prediction of Exterior Sound Pressure Field of a Cylinder Using the Boundary Element Method
Abstract The prediction of sound pressure field in the acoustic domain caused by a diffracting object is of interest in many fields of acoustics. Applications in acoustics include detecting, locating and classifying objects that generate a scattered ...
2013 / Mir Md. Maruf Morshed -
Effect of material nonhomogeneity on the mechanical behaviors of a thick-walled functionally graded sandwich cylindrical structure
Abstract In this investigation, the effect of material nonhomogeneity on the mechanical behaviors of a thick-walled sandwich cylindrical structure embedded with a functionally graded (FG) interlayer is investigated. The inner of the sandwich...
2012 / H.M. Wang, Y.K. Wei -
Improving the energy efficiency of traditional multi-stage steam-jet-ejector vacuum systems for deodorizing edible oils
Abstract The energy efficiency of multi-stage steam-jet-ejector vacuum systems was improved by solving the following main tasks: (i) systems analysis of these multi-stage plants and (ii) a selection of eligible surface roughness of steam-jet-...
2012 / Stepan Akteriana -
Vehicle Cycle Energy and Carbon Dioxide Analysis of Passenger Car in China
Abstract This study is aiming to assess the primary energy consumption, and the energy-related carbon dioxide (CO2) emissions in vehicle cycle for a China passenger car powered by internal combustion engine. Meanwhile, this analysis concerns about...
2012 / Shuhua Li, Nannan Li, Jun Li, Ying Gao -
A generalized rough set-based information filling technique for failure analysis of thruster experimental data
Abstract Interval-valued data and incomplete data are two key problems for failure analysis of thruster experimental data and have been basically solved by the proposed methods in this paper. Firstly, information data acquired from the simulation...
2013 / Shan Han, Qiang Zhu, Jianxun Li, Lin Chen -
A new solution on the buckling and stable length of multi wall carbon nanotube probes near graphite sheets
Abstract In this paper, a power series solution is used to study effect of intermolecular forces on the instability of multi walled carbon nanotube (MWCNT) probes/actuators in the vicinity of thin and thick graphite. A hybrid nano-scale continuum...
2011 / Aminreza Noghrehabadi, Mohammad Ghalambaz, Yaghoub Tadi Bern, Mohamadreza Abadyan, Molood Noghreh Abadi, et al. -
Nonlinear Dynamics and Chaos of Microcantilever-Based TM-AFMs with Squeeze Film Damping Effects2009 / Wen-Ming Zhang, Guang Meng, Jian-Bin Zhou, Jie-Yu Chen
-
Computer Vision Based Method and System for Online Measurement of Geometric Parameters of Train Wheel Sets2011 / Zhi-Feng Zhang, Zhan Gao, Yuan-Yuan Liu, Feng-Chun Jiang, Yan-Li Yang, et al.
-
LMD Method and Multi-Class RWSVM of Fault Diagnosis for Rotating Machinery Using Condition Monitoring Information2013 / Zhiwen Liu, Xuefeng Chen, Zhengjia He, Zhongjie Shen
-
Embedded Artificial Neuval Network-Based Real-Time Half-Wave Dynamic Resistance Estimation during the A.C. Resistance Spot Welding Process2013 / Liang Gong, Yan Xi, Chengliang Liu
-
Flying Instability due to Organic Compounds in Hard Disk Drive2012 / Koji Sonoda
-
A Pilot Study Verifying How the Curve Information Impacts on the Driver Performance with Cognition Model2013 / Xiaohua Zhao, Wei Guan, Xiaoming Liu
-
Modeling and Calibration for Crack Detection in Circular Shafts Supported on Bearings Using Lateral and Torsional Vibration Measurements2012 / A. Tlaisi, A. S. J. Swamidas, M. R. Haddara, A. Akinturk
-
Effect of Construction Method on Shear Lag in Prestressed Concrete Box Girders2012 / Shi-Jun Zhou
-
Vibration Isolation Platform with Multiple Tuned Mass Dampers for Reaction Wheel on Satellites2013 / Yao Zhang, Jingrui Zhang, Guang Zhai
-
GPS and Stereovision-Based Visual Odometry: Application to Urban Scene Mapping and Intelligent Vehicle Localization2011 / Lijun Wei, Cindy Cappelle, Yassine Ruichek, Frédérick Zann
-
Identification of Motive Forces on the Whole Body System during Walking2010 / Raghdan J. AlKhoury, Suraj Joshi, Rama B. Bhat, Shiping Ma