Mechanical engineering topic list of research papers
-
Aerodynamic optimization and evaluation for the three-dimensional afterbody/nozzle integrated configuration of hypersonic vehicles2012 / TaiYuan Gao, Kai Cui, XiuPing Wang, ShouChao Hu, GuoWei Yang, et al.
-
Development of Intelligent Wireless Sensor Networks for Human Comfort Index Measurement
Abstract Conventional wireless home automation networks (WHANs) incorporate embedded wireless sensors and actuators that monitors and control home living environment. WHANs primary goal is to maintain user comfort and efficient home management....
2011 / Mohd Izani Mohamed Rawi, Adnan Al-Anbuky -
Modeling of the deoxidization process on submerged arc weld metals2013 / Hirohisa Tanabe, Hiroyuki Hirata, Kazuhiro Ogawa, Masahiko Hamada
-
Experimental Study on Combustion Characteristic of Yellow Phosphorus Tail Gas
Abstract The field experiments simulate the combustion characteristics of yellow phosphorus tail gas by using homemade experimental apparatus. Results show that the change of excess coefficient of atmosphere has greater impact on the combustion...
2012 / Zhou Zhou, Huaping Gao -
Vibration Fault Diagnosis Method of Centrifugal Pump Based on EMD Complexity Feature and Least Square Support Vector Machine
Abstract Aiming at the non-stationary and non-linearity characteristics of the vibration signals of centrifugal pump, a new method based on complexity feature of Empirical Mode Decomposition (EMD) and Least Square Support Vector Machine (LS-SVM) is...
2012 / Zhou Yunlong, Zhao Peng -
Computing of gas flows in micro- and nanoscale channels on the base of the Boltzmann Kinetic equation
Abstract The paper describes the methodology of computing gas flows in narrow micro- and nanoscale channels on the basis of finite-difference solution of the Boltzmann kinetic equation using the conservative projection method of collision integral...
2010 / Yu.A. Anikin, E.P. Derbakova, O.I. Dodulad, Yu.Yu. Kloss, D.V. Martynov, et al. -
Modeling of Power Plant Superheated Steam Temperature Based on Least Squares Support Vector Machines
Abstract Aiming at the strong nonlinearity and large time-varying characteristics in controlling of super-heater temperature in plant, the method of LS-SVMs(Least Squares Support Vector Machines) based on radial basis function are used to model....
2012 / Tian Haijun, Wang Jingru -
Modeling and synthesis of human motion within the collaborative research center 588
Abstract Within the Collaborative Research Center “humanoid robots” at KIT there is a strong interest in generating humanlike motion. On one hand large-scale experimental studies are performed to gather insight into the variety and complexity of...
2011 / Christian Simonidis, Günther Stelzner, Wolfgang Seemann, Fabian Bauer -
Comparative Analysis of Scrap Car Recycling Management Policies
Abstract With the rapid development of community economic and the constant improvement of the level of living in our country, the number of the private car owned by local residents is increasing rapidly, and scrap cars also bring serious problem in...
2012 / Kun Yue -
Quality of pedestrian flow and crosswalk width at signalized intersections
Abstract Among various pedestrian facilities, signalized crosswalks are the most complex and critical ones. Their geometry and configuration including width, position and angle directly affect the safety, cycle length and resulting delays for all...
2010 / Wael K.M. Alhajyaseen, Hideki Nakamura -
Stability of Peripheral Milling Operations with Long End Mills
Abstract This paper presents dynamic modelling of peripheral milling systems with axially varying dynamics. The end mill is divided into differential elements along the cutter axis, and discrete nodes are assigned along the axial depth of cut. The...
2012 / Zekai Murat Kilic, Yusuf Altintas -
Dynamic Characteristics for Traditional Wooden Structure in Korea by Using Impact Hammer Test
Abstract This paper presents an investigation on dynamic characteristics of Heunginjimun through both ambient vibration and impact hammer tests. Heunginjimun, treasure No. 1 in Seoul, Korea, is a traditional wooden structure. Ambient vibration test...
2011 / S.A. Park, J.S. Choi, K.W. Min -
Nonlinear Decoupling Sliding Mode Control of Permanent Magnet Linear Synchronous Motor Based on α-th Order Inverse System Method
Abstract In this paper, a nonlinear dynamic decoupling controller is proposed for the permanent magnet linear synchronous motor (PMLSM) servo system to improve dynamic operating performance. Firstly, the reversibility of the PMLSM mathematical model ...
2011 / Jing-Feng Mao, Guo-Qing Wu, Ai-Hua Wu, Xu-Dong Zhang -
Cam fine blanking technology and die design
Abstract The fine blanking technology of cam were analyzed, its blank layout was designed, the fine blanking force was calculated and stamping equipment selected, the fine blanking die clearance and rounded edge were determined. The fine blanking...
2011 / WANG Hong -
Hydrodynamic hull form optimization using parametric models2012 / Soonhung Han, Yeon-Seung Lee, Young Bok Choi
-
Flow-induced vibrations of long circular cylinders modeled by coupled nonlinear oscillators2009 / Fei Ge, Xu Long, Lei Wang, YouShi Hong
-
Modeling and control of longitudinal vibration on flexible hoisting systems with time-varying length
Abstract To evaluate longitudinal vibration of flexible hoisting systems with time-varying length, the governing equations are developed employing the extended Hamilton's principle considering mutual influence of the rigid motion and deformation of...
2011 / BAO Ji-hu, ZHANG Peng, ZHU Chang-ming -
The Research of Human-Computer Interface Design based on Vision Communication
Abstract In the quick popularity and promoting function of micro-computer and internet, human-computer researches have unprecedented development and develop towards more intellect, convenient, human orientated direction. However, the present...
2011 / Rushan Yan -
Feature-to-Feature based Laser Scan Matching in Polar Coordinates with Application to Pallet Recognition
Abstract This paper presents a novel method called feature-to-feature based polar scan matching (FFPSM) for pallet recognition. Since FFPSM works in the laser scanner's polar coordinates, the transformation from polar coordinate to Cartesian...
2011 / Zhendong He, Yaonan Wang, Hong Yu -
A novel approach of testability modeling and analysis for PHM systems based on failure evolution mechanism
Abstract Prognostics and health management (PHM) significantly improves system availability and reliability, and reduces the cost of system operations. Design for testability (DFT) developed concurrently with system design is an important way to...
2013 / Xiaodong Tan, Jing Qiu, Guanjun Liu, Kehong Lv, Shuming Yang, et al.