Mechanical engineering topic list of research papers
-
Analytical Models for Tool Wear Prediction During AISI 1045 Turning Operations
Abstract Tool wear is one of the most important topic in cutting field. Its interest is due to the influence of tool wear on surface integrity of the final parts and on tool life, and, consequently, on the substitution policies and production costs. ...
2013 / Aldo Attanasio, Elisabetta Ceretti, Claudio Giardini -
Standardized Management of China Railway Emergency Plan Strategic Ponder
Abstract At present, railway emergency plan management system has become the important support to maintain the normal operation of railway transport system in the foreign developed countries. But our country was far behind in emergency management...
2013 / Jie Zhu, Zi-yang Wang, Yong Qin -
Control of a Test Bench for Dynamic Emulation of Mechanical Loads
Abstract The paper describes a control strategy for a test bench consisting of a drive under test mechanically connected with a dynamometer drive. The control of dynamometer drive is performed on RT-Lab simulation platform and based on dynamic...
2012 / Karol Kyslan, František Ďurovský -
Steam condensation dynamics in annular gap and multi-hole steam injectors
Abstract In direct UHT (Ultra high temperature) treatment, milk is pumped through a closed system where it is preheated, high temperature heated, cooled, homogenised and packed aseptically [1].Continuous direct steam injection is used to quickly...
2012 / Fredrik Innings, Lars Hamberg -
A Simulation-Based Dynamic Stochastic Route Choice Model for Evacuation2012 / Xing Zhao, Gang Ren, Chao Fan, Chen-Zi Ding
-
Microstructure Evolution of Grade X100 Pipeline under Plastic Deformation Condition2011 / Lihua Qi, Long Yang, Jing Niu, Yaorong Feng, Jianxun Zhang
-
The Effect of Free-Atmosphere Stratification on Boundary-Layer Flow and Power Output from Very Large Wind Farms2013 / Mahdi Abkar, Fernando Porté-Agel
-
A Simple Circular Cell Method for Multilevel Finite Element Analysis2012 / Hossein Talebi, Goangseup Zi, Mohammad Silani, Esteban Samaniego, Timon Rabczuk
-
Analysis of Sandwich Plates by Generalized Differential Quadrature Method2013 / A. J. M. Ferreira, E. Viola, F. Tornabene, N. Fantuzzi, A. M. Zenkour
-
Assessment of Combustor Working Environments2012 / Leiyong Jiang, Andrew Corber
-
Experimental Studies for the VVER-440/213 Bubble Condenser System for Kola NPP at the Integral Test Facility BC V-2132011 / Vladimir N. Blinkov, Oleg I. Melikhov, Vladimir I. Melikhov, Mikhail V. Davydov, Holger Wolff, et al.
-
A Numerical Study on the Supersonic Steam Ejector Use in Steam Turbine System2013 / Lin Cai, Miao He
-
Applicability of Scaling Approach for Analysis of Pyrolysis and Gasification of Porous Structures Composed of Solid Fuel Particles2012 / Aliaksandr Alevanau, Pawel Donaj, Weihong Yang, Wlodzimierz Blasiak
-
A Signal Coordination Control Based on Traversing Empty between Mid-Block Street Crossing and Intersection2012 / Changjiang Zheng, Genghua Ma, Jinhua Wu, Xiaoli Zhang, Xiaolei Zhang
-
Development of a noise prediction model under interrupted traffic flow conditions: A case study for Jaipur city2009 / BajrangL Swami, AkhilendraBhushan Gupta, Sheetal Agarwal
-
Drying Modeling and Simulation2012 / Zhijun Zhang, Ireneusz Zbicinski, Lixin Huang, Tsutomu Nozaki, Zhonghua Wu
-
Large-Eddy Simulation of the Aerodynamic and Aeroacoustic Performance of a Ventilation Fan2013 / Stefano Bianchi, Domenico Borello, Alessandro Corsini, Franco Rispoli, Anthony G. Sheard
-
Thermal stresses induced by a point heat source in a circular plate by quasi-static approach
Abstract The present paper deals with the determination of quasi-static thermal stresses due to an instantaneous point heat source of strength g pi situated at certain circle along...
2011 / K. C. Deshmukh, Y. I. Quazi, S. D. Warbhe, V. S. Kulkarni -
Multi Reflection of Lamb Wave Emission in an Acoustic Waveguide Sensor2013 / Martin Schmitt, Sergei Olfert, Jens Rautenberg, Gerhard Lindner, Bernd Henning, et al.
-
Effects of blunt trailing edge flow discharge in supersonic regime
Abstract Flow discharge at the blunt trailing edge of bodies immersed into supersonic stream alters significantly the downstream aerodynamic characteristics. This paper studies the changes in the base region topology for a wide range of purge...
2013 / B.H. Saracoglu, G. Paniagua, J. Sanchez, P. Rambaud