Mechanical engineering topic list of research papers
-
Transitional Intermittency Exponents Through Deterministic Boundary-Layer Structures and Empirical Entropic Indices2014 / LaVar Isaacson
-
Brain-Map Based Carangiform Swimming Behaviour Modeling and Control in a Robotic Fish Underwater Vehicle2015 / Abhra Roy Chowdhury, Sanjib Kumar Panda
-
PMSG Wind Energy Conversion System: Modeling and Control2014 / Omessaad Elbeji, Mouna Ben Hamed, Lassaad Sbita
-
Investigation of shale gas microflow with the Lattice Boltzmann method2015 / Xiao-Ling Zhang, Li-Zhi Xiao, Long Guo, Qing-Ming Xie
-
Structure optimization and simulation analysis of the quartz micromachined gyroscope2014 / Xuezhong Wu, Haoxu Wang, Liqiang Xie, Peitao Dong
-
A coupled immersed boundary–lattice Boltzmann method and its simulation for biomimetic problems
Abstract A coupled immersed boundary–lattice Boltzmann method (IB–LBM) is introduced to solve biomimetic problems. Compared to the conventional IB–LBM, the strict satisfaction of no-slip boundary condition is implemented in the current method....
2015 / Jie Wu, Chang Shu -
Big End Bearing Losses with Thermal Cavitation Flow Under Cylinder Deactivation2015 / H. Shahmohamadi, R. Rahmani, H. Rahnejat, C. P. Garner, D. Dowson
-
Vertical Vibration of the Vehicle Model with Higher Degree of Freedom
Abstract New method of solution of the motion equation of the mechanical system with higher degree of freedom is applied on the investigation of the vertical vibration of the vehicle. Mechanical model is composed from three spatially elastically...
2014 / J. Soukup, J. Skočilas, B. Skočilasová -
The Test Verification Design Method Based on Rapid Prototyping Technology of Aero-engine
Abstract For the rapid test verification of aero-engine control and gas path fault diagnosis algorithm, the rapid prototyping hardware in the loop test verification method of the aircraft engine function algorithm module was designed, which based on ...
2015 / Xiao-Jie Qiu, Wen-Hua Zheng, Yu-Ting Tang, Feng Lu -
A Collaborative Optimization Model for Ground Taxi Based on Aircraft Priority2013 / Yu Jiang, Zhihua Liao, Honghai Zhang
-
Analytical Solutions for Functionally Graded Beams under Arbitrary Distributed Loads via the Symplectic Approach2015 / L. Zhao, W. Gan
-
INFLUENCE OF A LIQUID ON THE NATURAL FREQUENCIES OF ALMOST CIRCULAR PLATES2014 / MANUEL GASCÓN-PÉREZ, PABLO GARCÍA-FOGEDA
-
RBF Neural Network of Sliding Mode Control for Time-Varying 2-DOF Parallel Manipulator System2013 / Haizhong Chen, Songlin Wo
-
Modeling and Analysis of the Weld Bead Geometry in Submerged Arc Welding by Using Adaptive Neurofuzzy Inference System2013 / Nuri Akkas, Durmuş Karayel, Sinan Serdar Ozkan, Ahmet Oğur, Bayram Topal
-
Surface Simplification of 3D Animation Models Using Robust Homogeneous Coordinate Transformation2014 / Juin-Ling Tseng
-
Subchannel Analysis of Wire Wrapped SCWR Assembly2014 / Jianqiang Shan, Henan Wang, Wei Liu, Linxing Song, Xuanxiang Chen, et al.
-
Stress Analysis of Gear Meshing Impact Based on SPH Method2014 / Rahmatjan Imin, Mamtimin Geni
-
Optimization of Cutter Geometric Parameters in End Milling of Titanium Alloy Using the Grey-Taguchi Method2015 / J. Ren, J. Zhou, J. Wei
-
Placement optimization of actuators and sensors for gyroelastic body2015 / Q. Hu, J. Zhang
-
Layout design optimization of dynamic environment flexible manufacturing systems2015 / J. A. Qudeiri, U. Umer, F. A. Khadra, H. Hussein, A. Al-Ahmari, et al.