Mechanical engineering topic list of research papers
-
Influence of surface roughness on the friction property of textured surface2015 / Y. Zhou, H. Zhu, W. Zhang, X. Zuo, Y. Li, et al.
-
Uncertain random time-cost trade-off problem2014 / Hua Ke
-
Development of a 5 kW Cooling Capacity Ammonia-water Absorption Chiller for Solar Cooling Applications
Abstract The development of a small capacity absorption chiller and the numerical and experimental results are presented in this paper. The prototype is a thermally driven ammonia-water absorption chiller of 5kW cooling capacity for solar cooling...
2012 / François Boudéhenn, Hélène Demasles, Joël Wyttenbach, Xavier Jobard, David Chèze, et al. -
Image Processing Technology Research of On-Line Thread Processing
Abstract The paper introduced image processing technology based on image segmentation about on-line threads images, and describes in detail image processing technology from image preprocessing, image gmentation, and threaded parameter test. Threaded ...
2012 / Peng Erbao, Zhang Guotong -
Reliability Assessment of Interconnected Generation Systems Based on Hourly Wind Speed Probability Model
Abstract Hourly wind speed probability distribution models are established, and based on them, wind speed is sampled. Considering the output characteristics of different type wind turbines and the wake effects between wind turbines, wind farm output ...
2011 / Wen-Hui Shi, Jing Chen -
Simulation of Roughness and Surface Texture Evolution at Macroscopic Scale During Cylinder Honing Process
Abstract The honing process produces surface liners with specific functional properties. Engine performances and life expectancy are directly impacted by the quality of honed surface. The form quality, the roughness and the surface appearance...
2013 / B. Goeldel, M. El Mansori, D. Dumur -
Fuzzy control for the process of heat removal during the composting of agricultural waste2013 / Maciej Neugebauer, Piotr Sołowiej, Janusz Piechocki
-
Stability Prediction of Milling Process with Variable Pitch Cutter2013 / Gang Jin, Qichang Zhang, Shuying Hao, Qizhi Xie
-
Comparison of Regression and Artificial Neural Network Models for Surface Roughness Prediction with the Cutting Parameters in CNC Turning2007 / Muammer Nalbant, Hasan Gokkaya, İhsan Toktaş
-
Disturbance Observer–Based In-process Detection and Suppression of Chatter Vibration
Abstract Chatter vibration can be monitored by using external sensors such as acceleration sensors and dynamometers. However, from the viewpoint of reliability, using external sensors leads to an increase in failure rate. Therefore, we developed a...
2012 / T. Yoneoka, Y. Kakinuma, K. Ohnishi, T. Aoyama -
Arrow-mounted Ballistic System for Measuring Performance of Arrows Equipped with Hunting Broadheads
Abstract Measuring an arrow's ballistic performance such as arrow velocity on impact, total time of flight and arrow shaft oscillation is challenging because of the dynamic nature of arrow flight. This challenge becomes increasingly difficult as the ...
2012 / John Barton, Jan Včelák, Javier Torres-Sanchez, Brendan O’Flynn, Cian O’Mathuna, et al. -
Based on the ARM and PID Control Free Pendulum Balance System
Abstract The free motion of a pendulum is a discontinuous change of the unstable system, when a motor is fixed to the end of free pendulum, and a flat plate is mounted on the motor shaft, so the motor drives the plate to rotate, which can realize...
2012 / Li Yanhong, Li Shuliang -
A Time Domain Simulation Approach for Micro Milling Processes
Abstract Prediction of Process Machine Interactions (PMI) can be achieved using models for conventional milling processes in the time and frequency domain. However, instabilities such as regenerative chatter can also be observed in micro milling...
2012 / Eckart Uhlmann, Frederik Mahr -
Study on Electric Power Steering System Based on ADAMS
Abstract Electric Power Steering (EPS) is a full electric system, which reduces the amount of steering effort by directly applying the output from an electric motor to the steering system. This research aims at developing EPS boost curve embody into ...
2011 / Hao Chen, Yali Yang, Ruoping Zhang -
A Threat Assessment Algorithm Based on AHP and Principal Components Analysis
Abstract In allusion to the shortage of traditional analytic hierarchy process in the determination of weight coefficient, a threat evaluation model based on the principle components analysis and analytic hierarchy process was proposed in the...
2011 / Gao-yang Yin, Shao-lei Zhou, Wen-guang Zhang -
Airworthiness Management of CFM56 Products in FAA and EASA
Abstract Discussion on airworthiness management of CFM56 products in FAA and EASA is presented in this paper. The successful experience of the CFM56 series is summarized about engine model design, type certification and continuous aviation safety...
2011 / Gao Yanlei, Zhou Yanpei -
Research on Knowledge-based System for Typical Aircraft Composite Component Design
Abstract Considering the characteristic of composite component design, a knowledge-based system for the design of aircraft composite component is developed. The system design adopts client/application/server (C/A/S) three-layer structure. The...
2011 / Mei Zhongyi, Zhu Sanshan, Muhammad Younus, Amir Saleem -
A Sensibility Analysis to Geometric and Cutting Conditions Using the Particle Finite Element Method (PFEM)
Abstract The (PFEM) is employed to simulate orthogonal metal cutting of 42CD4 steel. The objectives of this work are mainly three: The first one is to validate PFEM strategies as an efficient tool for numerical simulation of metal cutting processes...
2013 / J. Rodríguez, P. Arrazola, J. Cante, A. Kortabarria, J. Oliver -
Numerical Study of Fluid Flow on Magneto-Hydrodynamic Mixed Convection in a Lid Driven Cavity having a Heated Circular Hollow Cylinder
Abstract Magneto-hydrodynamic mixed convection in a lid driven cavity along with a heated circular hollow cylinder positioned at the centre of the cavity is studied numerically. The left and right vertical walls are kept at a constant temperature Tc ...
2013 / S.K. Farid, M.M. Billah, M.M. Rahman, Uddin Md. Sharif -
Thin-Walled Part Machining Process Parameters Optimization based on Finite-Element Modeling of Workpiece Vibrations
Abstract Arising vibrations when milling thin-walled parts are the most essential factor that limits machining productivity and surface location accuracy. Such vibrations have large amplitude and often result in irreversible workpiece damage on...
2013 / S. Bolsunovskiy, V. Vermel, G. Gubanov, I. Kacharava, A. Kudryashov