Mechanical engineering topic list of research papers
-
Single Neuron PID Sliding Mode Parallel Compound Control for Alternating Current Servo System
Abstract Considering changes, strong interference of load torque and moment of inertia for alternating current position servo system, a single neuron PID and sliding mode parallel compound control strategy is proposed. The parallel architecture that ...
2012 / Ying Zhang, Peng Li, Wen-jiang Wu -
Research on Camera Self-Calibration of High-Precision in Binocular Vision
Abstract This paper presents a self-calibration method of binocular vision; Frist,to match the point coordinates to be normalized to calculate fundamental matrix. Then solving the Kruppa equation by decomposing the fundamental matrix, getting the...
2012 / Zetao Jiang, Lianggang Jia, Shutao Guo -
Solid-liquid Two-phase Flow Numerical Simulation around Guide Vanes of Mixed-flow Water Turbine
Abstract Based on the N-S control equation and κ-ɛ-Ap turbulent model, the solid-liquid two-phase flow field around the guide vanes of a mixed-flow water turbine was simulated. The solid-liquid two-phase flow characters around the guide vanes were...
2012 / Qifei Li, Rennian Li, Hui Quan, Wei Han -
Pulsed Laser Micro Polishing of Metals using Dual-beam Technology
Abstract In this publication laser micro polishing with an additional laser beam for pre-heating of the surface is investigated.The influence of the following process parameters on the surface roughness is examined: Pre-heating laser power, scanning ...
2013 / C. Nüsser, H. Sändker, E. Willenborg -
Effect of Local Occurrence of Non-Equilibrium Condensation on Transonic Flow Field
Abstract The transonic flow over an airfoil is characterized by a shock wave standing on the suction surface. When non-equilibrium condensation occurs in a supersonic flow field, the flow is affected by latent heat released by it. According to...
2013 / Shigeru Matsuo, A.B.M. Toufique Hasan, Junji Nagao, Tokitada Hashimoto, Toshiaki Setoguchi, et al. -
Aerodynamics of contemporary FIFA soccer balls
Abstract The soccer is the world's most popular and widely watched game. Due to increasing technological advancement and demand for performance, the ball manufacturers have been developing new designs progressively. A traditional spherical football...
2011 / Firoz Alam, Harun Chowdhury, Hazim Moria, Franz Konstantin Fuss, Iftekhar Khan, et al. -
Control Analysis of Production and Apparent Quality of Automobile Large Plastic Parts
Abstract Upon summarization and analysis of the structural features of automobile large plastic parts and the selection of corresponding shaping modes, this paper analyzes and elaborates product design, raw material selection, forming method,...
2011 / Ling Sun, XiaoMing Liu -
Numerical Control Innovation for Double Cradle Straight Bevel Gear Milling Machine
Abstract The Y2726-type double cradle straight bevel gear milling machine has been widely used at home and abroad, it cut straight bevel gear to barrel-type teeth by gear generating motion method. To avoid changing and adjusting transmission system...
2011 / Zhang Mingzhu, Li Hongtao, Wei Dongzhi -
Simulation Platform to Evaluate Consumption for a Route Road
Abstract Ecogem is a project funded by the European Commission under the FP7 program which aims to develop a driver assistance system for electric vehicles to determine the most efficient routes from the point of view of electricity consumption,...
2012 / Aurelio Díaz de Arcaya, Luis Usatorre, Gonzalo Lázaro, M.O. de Zárate, U.M. de Estarrona, et al. -
Investigation of contact deformation and wear characteristics of discrete track recording media2011 / Y. Yoon, F. E. Talke
-
Simbody: multibody dynamics for biomedical research
Abstract Multibody software designed for mechanical engineering has been successfully employed in biomedical research for many years. For real time operation some biomedical researchers have also adapted game physics engines. However, these tools...
2011 / Michael A. Sherman, Ajay Seth, Scott L. Delp -
Study on Structure Optimization of Lap Region between Skirt and Composite Case
Abstract To optimize Lap Region between the Skirt and Composite Case(LRSC) in Solid Rocket Motor,made finite element analysis for the load and deformation of this structure under axial compression load,proposed three optimization scheme for the...
2011 / Hongchao Liu, Chunguang Wang, Yongqiong Liu, Bo Yuan -
Measurement and analysis for lithium battery of high-rate discharge performance
Abstract High-rate lithium battery is the object researched by electric-chemical experts due to the increasing of miniaturization and high-power devices. In this paper, measure and analysis their high-rate discharge performance for two kinds...
2011 / Huai Chuangfeng, Liu Pingan, Jia Xueyan -
Study on Regulating Law of Two-stage Turbo charger System of Piston Aircraft Engine
Abstract The power of engine can be recovered at high altitude by matching turbocharger, however, if the mass flow of turbine is not accurate, it will result in under power or boost pressure exceed engine required strength of structure, therefore...
2011 / Ding Xianfei, Xu Bin -
Effect of Reclamation on the Skin Layer of Ductile Iron Cast in Furan Molds2013 / R. Dańko, M. Holtzer, M. Górny, S. Żymankowska-Kumon
-
A time-domain boundary element method for quasistatic thermoviscoelastic behavior modeling of the functionally graded materials2013 / H. Ashrafi, M. Shariyat, K. Asemi
-
A Preliminary Study of Just-in-Time Methods for a Seamless Public Transportation Information Framework2012 / Spring C. Hsu
-
GTA-based framework for evaluating the role of design parameters in cogeneration cycle power plant efficiency
Abstract This paper presents a methodology based on graph theoretic approach (GTA) to design a new cogeneration cycle power plant (CGCPP), improvement of existing plant and comparison of two real life operating cogeneration cycle power plants....
2012 / Nikhil Dev, Samsher, S.S. Kachhwaha, Rajesh Attri -
Form-finding methods for deployable mesh reflector antennas
Abstract Deployable high-frequency mesh reflector antennas for future communications and observations are required to obtain high gain and high directivity. In order to support these new missions, reflectors with high surface accuracy are widely...
2013 / Tuanjie Li, Jie Jiang, Hanqing Deng, Zhanchao Lin, Zuowei Wang -
Instantaneous performance of the first Integrated Solar Combined Cycle System in Algeria
Abstract There is a great interest in the development of renewable energies and more particularly in solar energy. This study arises in midst of construction of the first integrated solar combined cycle system (ISCCS) in Algeria. In the present...
2011 / Omar Behar, Abdallah Kellaf, Kamal Mohamedi, Maiouf Belhamel