Mechanical engineering topic list of research papers
-
Design and economic investigation of shell and tube heat exchangers using Improved Intelligent Tuned Harmony Search algorithm
Abstract This study explores the thermal design of shell and tube heat exchangers by using Improved Intelligent Tuned Harmony Search (I-ITHS) algorithm. Intelligent Tuned Harmony Search (ITHS) is an upgraded version of harmony search algorithm which ...
2014 / Oguz Emrah Turgut, Mert Sinan Turgut, Mustafa Turhan Coban -
Nonlinear Solution to a Non-Fourier Heat Conduction Problem in a Slab Heated by Laser Source2016 / Mohammad Javad Noroozi, Seyfolah Saedodin, Davood Domiri Ganji
-
A stochastic model for the cell formation problem considering machine reliability2015 / Bahman Esmailnezhad, Parviz Fattahi, Amir Saman Kheirkhah
-
Development and Production Costs Estimating for Aviation Equipment Based on Uncertainty Design
Abstract The estimation accuracy of aviation equipment development and production cost has very important significance on program budget management. At the beginning of aviation equipment development, the requirement has many unknown factors and the ...
2015 / Huang Zhaodong, Luo Rongxuan, Jin Jing -
Effect of pongamia biodiesel on emission and combustion characteristics of DI compression ignition engine
Abstract Biodiesel produced from pongamia oil has been considered as promising option for diesel engines because of its environmental friendliness. In this work, bio-diesel from pongamia oil is prepared (PME 100), tested on a diesel engine for...
2014 / K. Nantha Gopal, R. Thundil Karupparaj -
Robust Design of Fixture Configuration
Abstract The paper deals with robust design of fixture configuration. It aims to investigate how fixture element deviations and machine tool volumetric errors affect machining operations quality. The locator position configuration is then designed...
2014 / Giovanni Moroni, Stefano Petrò, Wilma Polini -
Performance modeling of industrial gas turbines with inlet air filtration system
Abstract The effect of inlet air filtration on the performance of two industrial gas turbines (GT) is presented. Two GTs were modeled similar to GE LM2500+ and Alstom GT13 E2-2012, using TURBOMATCH and chosen to operate at environmental conditions...
2015 / Samuel O. Effiom, Fidelis I. Abam, Olayinka S. Ohunakin -
Dependence of the Contact Resistance on the Design of Stranded Conductors2014 / Youcef Zeroukhi, Ewa Napieralska-Juszczak, Guillaume Vega, Krzysztof Komeza, Fabrice Morganti, et al.
-
Delay Pressure Detection Method to Eliminate Pump Pressure Interference on the Downhole Mud Pressure Signals2013 / Yue Shen, Ling-Tan Zhang, Shi-Li Cui, Li-Min Sheng, Lin Li, et al.
-
Analysis of Laminated Shells by Murakami’s Zig-Zag Theory and Radial Basis Functions Collocation2013 / D. A. Maturi, A. J. M. Ferreira, A. M. Zenkour, D. S. Mashat
-
An Efficient Approach for Identifying Constitutive Parameters of the Modified Oyane Ductile Fracture Criterion at High Temperature2013 / Sergei Alexandrov, Yusof Mustafa, Mohd Yazid Yahya
-
Condition Based Maintenance Optimization of an Aircraft Assembly Process Considering Multiple Objectives2014 / J. Li, T. Sreenuch, A. Tsourdos
-
An Improved ZMP-Based CPG Model of Bipedal Robot Walking Searched by SaDE2014 / H. F. Yu, E. H. K. Fung, X. J. Jing
-
Preliminary Development of Thermal Power Calculation Code H-Power for a Supercritical Water Reactor2014 / Fan Zhang, Dao-gang Lu, Dan-ting Sui, Bo Yuan, Chao Guo
-
Vibrational Suspension of Light Sphere in a Tilted Rotating Cylinder with Liquid2014 / Victor G. Kozlov, Stanislav V. Subbotin
-
Analytic Model of Microcantilevers as Low Frequency Generator2014 / Sandeep Arya, Saleem Khan, Parveen Lehana
-
Master–slave manipulator for laparoscopic surgery using a 6-axis vertical articulated robot2014 / Makoto Jinno
-
Research on the Planning and Construction of Platform of Comprehensive Informatization Service in Colleges and Universities
Abstract With a faster speed of the development and construction step of informatization and internationalization of colleges and universities, the platform of comprehensive informatization service in colleges and universities has become an...
2012 / Wang Yang, Yu Jun, Li Zhenhua -
Flexible 3D Force Tactile Sensor for Artificial Skin for Anthropomorphic Robotic Hand
Abstract A highly bendable mechanically flexible 3D force sensor for fast distributed tactile artificial skin is presented with high force resolution and range. The sensor shows clear selectivity for determining the three components of an applied...
2012 / H. Yousef, J.-P. Nikolovski, E. Martincic -
Spatial Alignment of Passive Radar and Infrared Image Data on Seeker
Abstract The line-of-sight (LOS) and LOS rate is essential for proportional navigation. However, on the hybrid seeker with passive radar sensor and infrared image sensor, they can not be obtained directly for they are observed in different observing ...
2011 / Jin Tang, Rui Ding