Mechanical engineering topic list of research papers
-
Experimental Study of Penetrant Solution Impact on Gas Desorption
Abstract For the question of gas exceeding limit in the coal face, independent research and development gas desorption experimental measuring device was used under the condition of external solution invasion, according to the experimental data and...
2011 / ZHANG Guo-hua, LIU Xian-xin, BI Ye-wu, PU Wen-long -
Research of Risk Assessment System on Tailings Pond Water Pollution
Abstract The risk assessment system of tailings pond water pollution takes the engineering data, the environmental data and the incident material as the foundation. Firstly, it is necessary to prepare tailings materials, indentify the main risky...
2011 / He Ziying, Wu Chao -
Simulation analysis on policy interaction effects between emission trading and renewable energy subsidy2013 / Jie Huang, Feng Xue, Xiaofang Song
-
Numerical Modelling of Non-similar Mixed Convection Heat and Species Transfer along an Inclined Solar Energy Collector Surface with Cross Diffusion Effects2011 / Osman Anwar Bég, Ahmed Bakier, Ramachandra Prasad, Swapan Kumar Ghosh
-
Detection of nonlinearity effects in structural integrity monitoring methods for offshore jacket-type structures based on principal component analysis
Abstract The detection of changes in the dynamic behavior of structures is an important issue in structural safety assessment. The development of detection methods assumes greater significance in the case of offshore platforms because the inherent...
2013 / A. Mojtahedi, M.A. Lotfollahi Yaghin, M.M. Ettefagh, Y. Hassanzadeh, M. Fujikubo -
CAM-Rob postprocessor based on a fuzzified redundancy resolution scheme2011 / Javier Andres, Luis Gracia, Josep Tornero
-
Reliable non-prehensile door opening through the combination of vision, tactile and force feedback2010 / Mario Prats, Pedro J. Sanz, Angel P. del Pobil
-
Influence of the abradant’s composition on the selected physical properties in the process of front grinding of surfaces with microcrystalline sintered corundum grinding wheels2013 / Czesław Niżankowski
-
Analysis of Image Rotation for Aerial Remote Sensor with Off-Axis three-Reflective Optical System
Abstract In order to improve the dynamic state resolution of aerial remote sensor, it is indispensable to analyzing image rotation of aerial remote sensor. According to optical reflection vector theory, study on imaging character of aerial remote...
2012 / Yu Chun-feng, Ding Ya-lin, Hui Shou-wen, Zhang Jing-guo, Leng xue -
Thermal Assessment of Convective Heat Transfer in Air- Cooled PEMFC Stacks: An Experimental Study
Abstract This study presents an experimental stack-level thermal and hydrodynamic assessment of a model air-cooled PEM fuel cell. To mimic the heat generation inside the MEA, rubber heater films are used. Pressure drop along the stack channels and...
2012 / M. Akbari, A. Tamayol, M. Bahrami -
A Theoretical Research on the Affective Factors of the Transimission of Ultrasonic Used in Descaling
Abstract In order to get a good cleaning effect, we can change the location of ultrasonic cleaning device according to the ultrasonic propagation characteristics of ultrasonic. Judge by Doppler shift principle, this article build an equation which...
2012 / Zhang Aiping, Liu Chao, Xu Zhiming -
Mechanical surface treatment of steel-Optimization parameters of regime
Abstract Mechanical treatment process by superficial plastic deformation is employed for finished mechanical part surface. It introduces structural modifications that offer to basic material new properties witch give a high quality of physical and...
2010 / L. Laouar, H. Hamadache, S. Saad, A. Bouchelaghem, S. Mekhilef -
Study on whole-life cycle automotive manufacturing industry CO2 emission accounting method and Application in Chongqing
Abstract Low carbon economy has become a worldwide trend, many countries are seeking low carbon means to achieve environmentallyfriendly economy growth. However, various Greenhouse gases species in different industries, as well as various detection...
2011 / Xianchun Tan, Zekun Mu, Sheng Wang, Hongxing Zhuang, Longxing Cheng, et al. -
Study on the heat hazard of deep exploitation in high-temperature mines and its evaluation index
Abstract With the increase of mining depth, high-temperature mines have been more and more now; it is about 150 pair mines that have the problem of high-temperature to different extent in china. High-temperature environment directly affects...
2009 / Zhao-gui Su, Zhong-an Jiang, Zhong-qiang Sun -
Design method of synergetic support for coal roadway
Abstract This paper presents the concept of synergetic support with a comprehensive design method based on the existing support theories and engineering practices. The synergetic support is different from the common combined support method as it can ...
2009 / Liu Gang, Long Jing-kui, Cai Hong-du, Li Yuan -
5 Axis Mill Turn and Hybrid Machining for Advanced application
Abstract The superiority of machining process integration of integrated machines has drawn more and more attention these days. This paper aims at machining examples of complex-shaped workpieces on the integrated mill turn center. First, it reports...
2012 / Masahiko Mori, Makoto Fujishima, Oda Yohei -
Design and Control of Variable Length Hyper Redundant Robot
Abstract This paper puts forward a design concept of Variable length Hyper-redundant robot, consisting of eight links and their encloser system. Each of the rigid links is connected via actuated revolute joints in a chain. The robot will operate on...
2012 / Annisa Bt Jamali, Md. Raisuddin Khan, Mozasser Rahman -
Real-time Algorithm for Detection of Breakthrough Bone Drilling
Abstract The purpose of this study is to develop a force control algorithm that detects breakthrough of drill bit during bone drilling process, where the drilling process will halt and return to a safe position once the algorithm is triggered....
2012 / Mohd Hazny Aziz, Muhammad Azmi Ayub, Roseleena Jaafar -
Modeling and Numerical Analysis of High-speed Turbo Braking Assists
Abstract ‘Turbo Braking Assists’ (TBA) employs the principles of turbo machinery and automotive engineering in order to achieve effective braking assistance for the modern day disc as well as drum brakes. These brakes are intended for the purpose of ...
2012 / G. Ramkumar, Amrit Om Nayak, D. Manikandan -
The Francis Pump Turbine With Stochastic Blades
Abstract In the article are introduced a special hydraulic designs of pump Francis turbines. There are compared characteristics of classical pump Francis turbine and stochastic blade pumps Francis turbine. There are introduced pump Francis turbines...
2012 / František Pochylý, Miloslav Haluza, Jindřich Veselý