Mechanical engineering topic list of research papers
-
Analysis and Testing of MR Shear Transmission Driven by SMA Spring2013 / Jin Huang, Xu Chen, Lirong Zhong
-
Fiber Optic Vibration Sensor Based on the Tilted Fiber Bragg Grating2013 / Jiali An, Tao Liu, Yongxing Jin
-
Analytical Solutions of Spherical Cavity Expansion Near a Slope due to Pile Installation2013 / Jingpei Li, Yaguo Zhang, Haibing Chen, Fayun Liang
-
Vortex structure simulation for supersonic mixing layers using nonlinear PSE method
Abstract The method of nonlinear parabolized stability equations (PSE) is applied in the simulation of vortex structures in compressible mixing layer. The spatially-evolving unstable waves, which dominate the vortex structure, are investigated...
2012 / Xin Guo, Qiang Wang -
Adaptive control of anti-aircraft missile launcher mounted on a mobile base
Abstract This paper presents the problem of control of anti-aircraft missile launcher mounted on a moving carrier-vehicle. Direct excitations on the vehicle from the road cause adverse vibrations of the launcher. In order to increase the precision...
2012 / Izabela Krzysztofik, Zbigniew Koruba -
Construction of Fisheye Lens Inverse Perspective Mapping Model and Its Applications of Obstacle Detection2010 / Chin-Teng Lin, Tzu-Kuei Shen, Yu-Wen Shou
-
A Transportation Problem with Uncertain Costs and Random Supplies
Abstract Transportation problem is an optimization problem. In general, it was studied under random or uncertain condition. Considering the recent complexity, it is not enough to make should be a perfect transportation plan only based on. Usually,...
2015 / Haiying Guo, Xiaosheng Wang, Shaoling Zhou -
Numerical modeling of friction stir welding using the tools with polygonal pins
Abstract Friction stir welding using the tools with polygonal pins is often found to improve the mechanical strength of weld joint in comparison to the tools with circular pins. However, the impacts of pin profile on the peak temperature, tool...
2015 / M. Mehta, G.M. Reddy, A.V. Rao, A. De -
Improving Driving Safety Based on Safe Distance Design in Vehicular Sensor Networks2012 / Chen Chen, Lei Liu, Xiaobo Du, Qingqi Pei, Xiangmo Zhao
-
A Reliable Transport Protocol with Prediction Mechanism for Urgent Information in Wireless Sensor Networks2013 / Zhenchun Wei, Lin Feng, Jianghong Han, Xiangwei Xu, Hao Peng
-
A bearing fault diagnosis method based on the low-dimensional compressed vibration signal2015 / X. Zhang, N. Hu, L. Hu, L. Chen, Z. Cheng
-
Mixed Convection Flow Adjacent to a Stretching Vertical Sheet in a Nanofluid2013 / Nor Azizah Yacob, Anuar Ishak, Roslinda Nazar, Ioan Pop
-
Analytical approach for solving two-dimensional laminar viscous flow between slowly expanding and contracting walls
Abstract In this article, an analysis has been performed to study the two dimensional viscous flow between slowly expanding and contracting walls with weak permeability. The governing equations for the base fluid of this problem are described by...
2015 / E. Rahimi, A. Rahimifar, R. Mohammadyari, I. Rahimipetroudi, M. Rahimi-Esbo -
Thermodynamic and economic analysis of a 900 MW ultra-supercritical power unit2012 / Henryk łukowicz, Sławomir Dykas, Sebastian Rulik, Katarzyna Stępczyńska
-
Knowledge Fusion Design Method: Satellite Module Layout
Abstract As a complex engineering problem, the satellite module layout design (SMLD) is difficult to resolve by using conventional computation-based approaches. The challenges stem from three aspects: computational complexity, engineering...
2009 / Wang Yishou, Teng Hongfei -
Aircraft-skin Infrared Radiation Characteristics Modeling and Analysis
Abstract One of the most important problems of stealth technology is to evaluate the infrared radiation (IR) level received by IR sensors from fighters to be detected. This article presents a synthetic method for calculating the IR emitted from...
2009 / Lu Jianwei, Wang Qiang -
Heat transfer augmentation in the straight channel by using nanofluids
Abstract Heat transfer enhancement of nanofluids under turbulent flow through a straight square channel under constant heat flux conditions at the upper and lower walls is studied numerically. The nanofluids are prepared as solid nanoparticles of...
2014 / M.Kh. Abdolbaqi, C.S.N. Azwadi, R. Mamat -
An Adaptive SPC Approach for Multi-sensor Fusion and Monitoring of Time-varying Processes
Abstract The effort to achieve in-process manufacturing process monitoring capabilities that are compliant with industrial implementation constraints is leading to a continuously growing development of multi-sensor approaches. In...
2013 / M. Grasso, P. Albertelli, B.M. Colosimo -
NC Rough Machining of Sculptured Surface Based on Measured Data
Abstract A new method for generating tool paths for rough machining of sculptured surface is presented in this paper. The sculptured surface is approximated by a regular mesh of quadrangular facets. A set of equidistant horizontal planes are...
2011 / Xue-yi LI, Hong JIANG, Xiao-chun WANG -
Combined Free Wake / CFD Methodology for Predicting Transonic Rotor Flow in Hover
Abstract A new combined wake / CFD methodology is used to include realistic wake effects in CFD solutions for the rotor flow in hover. The analytical method for predicting the hovering rotor wake is described to investigate the motion of the helical ...
2011 / Yi-hua CAO, Zhi-qiang YU, Yuan SU, Kai KANG