Mechanical engineering topic list of research papers
-
Characteristics of Road Surface Icing on Beijing Expressway
Abstract Based on the datasets observed by the VAISALA ROSA from 2007 to 2009, the spatial-temporal characteristics of Beijing Expressway road surface icing were studied. Firstly, the road surface icing almost occurs in the northwest region of...
2011 / Xun Li, Zhicong Yin, Deping Ding, Zhuang Xie -
Design Method for High-gain Control of Linear Motor Feed Drive Systems Using Virtual Linear Friction
Abstract This paper describes a method for stabilizing feed drive systems by introducing virtual friction characteristics having higher vibration damping with a friction compensator. The validity of the proposed friction compensator is verified by...
2012 / Hirofumi Itagaki, Masaomi Tsutsumi, Hideaki Iwanaka -
Logistics Transportation Vehicle System for Information Acquisition Based on Wireless Sensor Network
Abstract A logistics transportation vehicle system for information acquisition based on wireless sensor network (WSN) is proposed. The system is consisted of vehicle module and cargo package module. Star network is used, and system structure,...
2012 / R. Zhang, D. Li, H.F. Huang, Y. Wang, Y.Z. Wang, et al. -
Self-tuning Control on Integrated System of EPS and SAS Based on Pole Placement
Abstract Entire vehicle multi-degree of freedom dynamic model of Semi-Active Suspension(SAS) and Electric Power Steering(EPS) integrated system including yaw, roll and pitching motion is established. Self-tuning integrated control strategy of SAS...
2011 / RuoChen Wang, Long Chen, DaChong Wang -
Design and test of a parallel kinematic solar tracker2015 / S. Mauro, A. Battezzato, G. Biondi, C. Scarzella
-
Investigation on heat transfer of a rotor blade tip with various film cooling holes arrangements and groove depths2015 / F. Tong, W. Gou, L. Li, Q. Liu, Z. Yue, et al.
-
Reduction of Burr Formation in Drilling Using Cryogenic Process Cooling
Abstract Since deburring of components can amount to a considerable cost factor in machining, burr minimization strategies involve the potential of cost reduction. Due to that, they are of great interest for industrial applications. Beside tool...
2012 / D. Biermann, H. Hartmann -
Reprint of: Adjoint-based optimization for understanding and suppressing jet noise
Abstract Advanced simulation tools, particularly large-eddy simulation techniques, are becoming capable of making quality predictions of jet noise for realistic nozzle geometries and at engineering relevant flow conditions. Increasing computer...
2010 / Jonathan B. Freund -
Comparative investigation of the stagger variation influence on the hydrodynamic interference of high speed trimaran
Abstract This paper numerically investigates the influence of stagger variation of the outriggers on the hydrodynamic interference of high speed trimaran (HST). The slender body method (SBM) embedded in the Hullspeed© [1]...
2012 / K.A. Hafez, A.A. El-Kot -
Formal verification of safety protocol in train control system2011 / Yan Zhang, Tao Tang, KePing Li, Jose Manuel Mera, Li Zhu, et al.
-
Transient mixed thermo-elastohydrodynamic lubrication in multi-speed transmissions
Abstract Noise, vibration and harshness (NVH) refinement as well as thermo-mechanical efficiency are the key design attributes of modern compact multi-speed transmissions. Therefore, unlike simple gear pair models, a full transmission model is...
2011 / M. De la Cruz, W.W.F. Chong, M. Teodorescu, S. Theodossiades, H. Rahnejat -
Conjugate heat transfer investigations of turbine vane based on transition models
Abstract The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw (AGS) and γ-Reθ transition models, a 3D...
2013 / Hongjun Zhang, Zhengping Zou, Yu Li, Jian Ye, Songhe Song -
Generalized Boltzmann solution for non-equilibrium flows and the computation of flowfields of binary gas mixture
Abstract Hypersonic flows about space vehicles produce flowfields in thermodynamic non-equilibrium with the local Knudsen numbers Kn which may lie in all the three regimes: continuum, transition and rarefied. Continuum flows can be modeled...
2012 / Baoguo Wang, Geng Qian, Ramesh K. Agarwal, Christopher D. Wilson -
A Mechanical System Identification Method for Non-Invasive Ultrasound Theragnostic System
Abstract Abstract: In this paper, we propose a mechanical system identification method for the Non-Invasive Ultrasound Theragnostic System (NIUTS). NIUTS tracks and follows the movement in an affected area (kidney stones, in the present study) by...
2013 / Norihiro Koizumi, Kohei Ota, Akira Nomiya, Hiroyuki Tsukihara, Kiyoshi Yoshinaka, et al. -
Low-carbon Technologies Integrated Innovation Strategy Based on Modular Design
Abstract Modular design is an effective method for fast integrating global low-carbon technologies to respond the market dynamic application demands. It is a valuable emerging interdisciplinary research field. This paper analyses the energy-saving...
2011 / Yu Qi, Xiao-bo Wu -
From design optimization systems to geometrical contradictions
Abstract Within the framework of the Research Project PROSIT [1] aimed at the development of an integrated product design platform capable to link Computer-Aided Innovation (CAI) with PLM/EKM systems, the authors have approached the analysis of the...
2011 / Gaetano Cascini, Paolo Rissone, Federico Rotini -
Delivery Time Reliability Model of Logistics Network2013 / Liusan Wu, Qingmei Tan, Yuehui Zhang
-
FE Analysis of Dynamic Response of Aircraft Windshield against Bird Impact2013 / Uzair Ahmed Dar, Weihong Zhang, Yingjie Xu
-
An Evaluation of Relative Damage to the Powertrain System in Tracked Vehicles2009 / Sang-Ho Lee, Jeong-Hwan Lee, Sang-Hwa Goo, Yong-Cheol Cho, Ho-Young Cho
-
Processing of Instantaneous Angular Speed Signal for Detection of a Diesel Engine Failure2013 / Adam Charchalis, Mirosław Dereszewski