Mechanical engineering topic list of research papers
-
An inexact two-stage dynamic stochastic model for regional electricity and heat supply management with pollutants mitigation control2014 / Wei Li, Xiaoyu Liu, Guanzhong Sun, Ling Ji, Guohe Huang
-
Continuous Detonation Engine and Effects of Different Types of Nozzle on Its Propulsion Performance
Abstract The rotating propagation of a continuous detonation engine (CDE) with different types of nozzles is investigated in three-dimensional numerical simulation using a one-step chemical reaction model. Flux terms are solved by the so-called...
2011 / Shao Yetao, Liu Meng, Wang Jianping -
A Passive Method to Control Combustion Instabilities with Perforated Liner
Abstract The effectiveness of perforated liner with bias flow on the control of combustion instability is investigated. Combustion instabilities result from the coupling between acoustic waves and unsteady combustion heat release. Sometimes the...
2011 / Li Lei, Guo Zhihui, Zhang Chengyu, Sun Xiaofeng -
Dimensional optimization of a minimally invasive surgical robot system based on NSGA-II algorithm2015 / W. Wang, W. Wang, W. Dong, H. Yu, Z. Yan, et al.
-
On MHD unsteady reactive Couette flow with heat transfer and variable properties2013 / Oluwole Makinde, Oswald Franks
-
Unreliable bulk retrial queues with delayed repairs and modified vacation policy2014 / Madhu Jain, Amita Bhagat
-
Study on Ignition Capability of Overload Wire to Adjacent Combustions
Abstract In order to check the overload-wire's ignition capability to adjacent combustions, the aluminum and copper wires with sectional area of 1.5 mm2, 2.5 mm2 and 4 mm2 were used in experiment in different multiples overload current condition....
2012 / Jinzhuan Zhang -
A Service-based Method to Generate Shuttle Bus Timetable in Accordance with Rail Transit Timetable
Abstract As the urban community is revealing a suburbanization tendency along with the expanding of the Urban Rail Transit system, the traveling between the Urban Rail Transit station and the community is becoming a more and more crucial and...
2013 / Jiang Zhibin, Huang Qixiang -
Decentralized Sliding Mode Control for a Spacecraft Flexible Appendage Based on Finite Element Method
Abstract This paper is devoted to study the application of the decentralized sliding mode control method, which is used to reduce the vibration of large spacecraft flexible appendage. In the process of control design, the sliding surface of sliding...
2011 / Yong-an HUANG, Zi-chen DENG -
A Study on the Widths Design of Highway Roadside Clear Zone by Considering Multi-factors
Abstract This paper analyses the clear zone design parameters, including driver reaction time, conditions of vehicle leaving roadway and driving distance in clear zone. Meanwhile, in classical physics, the process that the vehicle runs off roadway...
2013 / Yingying Xing, Linjun Lu, Jian John Lu, Shengxue Zhu -
Adaptive Fuzzy Torque Control of Passive Torque Servo Systems Based on Small Gain Theorem and Input-to-state Stability
Abstract Passive torque servo system (PTSS) simulates aerodynamic load and exerts the load on actuation system, but PTSS endures position coupling disturbance from active motion of actuation system, and this inherent disturbance is called extra...
2012 / Xingjian WANG, Shaoping WANG, Pan ZHAO -
Accuracy enhancement of the spherical actuator with a two-level geometric calibration method
Abstract This paper presents a two-level geometric calibration method for the permanent magnet (PM) spherical actuator to improve its motion control accuracy. The proposed actuator is composed of a stator with circumferential coils and a rotor with...
2014 / Liang Zhang, Weihai Chen, Jingmeng Liu, Xingming Wu, I-Ming Chen -
The Effects of Oil Supply Pressure at Different Groove Position on Frictional Force and Torque in Journal Bearing Lubrication
Abstract An axial groove is a common supply method for distributing lubricant within a journal bearing. Lubricant is generally fed at a specific supply pressure to ensure that the journal and the bearing surface are separated. Shearing action...
2014 / Mohamad Ali Ahmad, Salmiah Kasolang, Rob Dwyer-Joyce -
Effect of electrode material on electrical discharge machining of tool steel surface
Abstract In this study the effect of electrode material was studied to avoid resulting residual stresses, the surface roughness and cracks resulted during Electrical Discharge Machining (EDM). Two types of EDM electrode materials were chosen, Dura...
2015 / Mona A. Younis, Mohamed S. Abbas, Mostafa A. Gouda, Fouad H. Mahmoud, Sayed A. Abd Allah -
Analysis on the Effect of Shading on the Characteristics of Large-scale on-grid PV System in China2013 / Yunlin Sun, Xiangzhi Li, Ruijiang Hong, Hui Shen
-
An Experimental Investigation on the Influence of Temperature on the Normal Impact of Fine Particles with a Plane Surface2014 / Ming Dong, Jun Xie, Linying Bai, Sufen Li
-
Characteristics Verification of an Independently Controllable Electromagnetic Spherical Motor2014 / Shuhei Maeda, Katsuhiro Hirata, Noboru Niguchi
-
Evaluation of Providing Recommended Speed for Reducing CO2 Emissions from Vehicles by Driving Simulator
Abstract Idling time at a signalized intersection increases the amount of CO2 emissions from vehicles. If drivers would be informed of the signal change prior to the change of the signal ahead from green to amber/red, they could decelerate in...
2014 / Yukimasa Matsumoto, Daisuke Tsurudome -
Tightly Coupled Integration of Ionosphere-Constrained Precise Point Positioning and Inertial Navigation Systems2015 / Zhouzheng Gao, Hongping Zhang, Maorong Ge, Xiaoji Niu, Wenbin Shen, et al.
-
Finite element analysis of vibration-driven electro-active paper energy harvester with experimental verification2015 / Z. Abas, H. S. Kim, L. Zhai, J. Kim