Mechanical engineering topic list of research papers
-
Restricted Three-Body Problem in Cylindrical Coordinates System2012 / Mohammed Sharaf, Aisha Alshaery
-
Thermal Buckling of Piezoelectric Composite Beam2011 / S. Yazdani, Y. Kiani, M. Jabbari, M. R. Eslami
-
A Procedure to Address the Fuel Rod Failures during LB-LOCA Transient in Atucha-2 NPP2011 / Martina Adorni, Alessandro Del Nevo, Francesco D'Auria, Oscar Mazzantini
-
Investigation of Boundary Effects on the Natural Cavitating Flow around a 2D Wedge in Shallow Water2011 / Xin Chen, Ying Chen, Jia-Yi Cao, Jie Li
-
Biologically Inspired Robotic Arm Control Using an Artificial Neural Oscillator2010 / Woosung Yang, Jaesung Kwon, Nak Young Chong, Yonghwan Oh
-
Fluid-Structure Interaction Analysis on Turbulent Annular Seals of Centrifugal Pumps during Transient Process2011 / Qinglei Jiang, Lulu Zhai, Leqin Wang, Dazhuan Wu
-
Modeling and Control of a Dragonfly-Like Robot2010 / Micael S. Couceiro, N. M. Fonseca Ferreira, J. A. Tenreiro Machado
-
Unsteady Heat Transfer from an Equilateral Triangular Cylinder in the Unconfined Flow Regime2011 / Amit Dhiman, Radhe Shyam
-
Unsteady Analyses of a Control Valve due to Fluid-Structure Coupling2013 / Yudong Xie, Yong Wang, Yanjun Liu, Fang Cao, Yongcheng Pan
-
Squeezing Force of the Magnetorheological Fluid Isolating Damper for Centrifugal Fan in Nuclear Power Plant2012 / Jin Huang, Ping Wang, Guochao Wang
-
Sediment-flow interactions at channel confluences: A flume study2015 / T. Liu, B. Fan, J. Lu
-
Experimental Investigation of Combustion and Emission Characteristics for Internal Combustion Rankine Cycle Engine under Different Water Injection Laws
Abstract This paper discusses a novel oxyfuel combustion method named internal combustion rankine cycle (ICRC) used in reciprocating engines. Water is heated up through heat exchanger by exhaust gas and engine coolant, and then injected into the...
2015 / Lezhong Fu, Zhijun Wu, Xiao Yu, Jun Deng, Zongjie Hu, et al. -
Parameter Identification for Finite Element Based Models in Dry Machining Applications
Abstract Dry machining is a challenging topic in industrial manufacturing: The absence of coolants results in ecological and economical benefits, but also in a significant increase of the occurring thermal stress. This leads to geometrical...
2015 / H. Wernsing, C. Büskens -
Hydraulic Bipedal Robots Locomotion Mathematical Modeling
Abstract The paper delivered describes a new approach into kinematics and dynamics of the robots with a tree-like kinematic structure based on the elements of graph theory. Block-matrix equation for robot's movement within generalized coordinates is ...
2015 / D.B. Kulakov, S.E. Semenov, B.B. Kulakov, P.V. Shcherbachev, O.I. Tarasov -
Research on Optimal Sensor Placement Based on Reverberation Matrix for Structural Health Monitoring2012 / Hai-feng Yang, Zi-yan Wu, Shu-kui Liu, Hong-bin Sun
-
An Approach to Improve the Quality of Infrared Images of Vein-Patterns2011 / Chih-Lung Lin
-
Simplified procedure for controlling pressure distribution of a scramjet combustor
Abstract Scramjet engines are used at extreme temperatures and velocity. New control problems involving distributed parameter control have been found concerning investigations of the control of scramjet engines whose physical states are spatially...
2014 / Tao Cui -
Accelerated Surface Measurement Using Wavelength Scanning Interferometer with Compensation of Environmental Noise
Abstract The optical interferometry systems are widely used for surface metrology. However, the environmental noise and the data analysis approach can limit the measurement performance during in- process inspection. This paper introduces a...
2013 / H. Muhamedsalih, X. Jiang, F. Gao -
Solar Blind System- Solar Energy Utilization and Climate Mitigation in Glassed Buildings
Abstract In the past few decades, energy scientists have focused on “renewable energy”, and solar energy in particular. Several technologies are commercialized for utilizing solar energy in the buildings by absorbing solar radiation and converting...
2014 / Amir Vadiee, Viktoria Martin -
Dynamic modeling and analysis of load sharing characteristics of wind turbine gearbox2015 / P. Yi, C. Zhang, L. Guo, T. Shi