Mechanical engineering topic list of research papers
-
Experimental Investigation of A Liquid Desiccant System for Air Dehumidification Working With Ionic Liquids
Abstract Electrically-driven compression chillers are the commonly used technology for cooling and dehumidifying air. Open sorption systems driven by solar heat are an alternative to conventional air dehumidification technology and may reduce...
2015 / Mark T. Zegenhagen, Cristina Ricart, Thomas Meyer, Roland Kühn, Felix Ziegler -
Reducing Entropy Generation in MHD Fluid Flow over Open Parallel Microchannels Embedded in a Micropatterned Permeable Surface2013 / Mohammad Yazdi, Shahrir Abdullah, Ishak Hashim, Kamaruzzaman Sopian
-
Thermal-Economic Modularization of Small, Organic Rankine Cycle Power Plants for Mid-Enthalpy Geothermal Fields2014 / Yodha Nusiaputra, Hans-Joachim Wiemer, Dietmar Kuhn
-
Theoretical Estimation of Thermal Effects in Drilling of Woven Carbon Fiber Composite2014 / José Díaz-Álvarez, Alvaro Olmedo, Carlos Santiuste, María Miguélez
-
Frequency comb generation for wave transmission through the nonlinear dimer2015 / K N Pichugin, A F Sadreev
-
Effect of Recession on the Re-entry Capsule Aerodynamic Characteristic
Abstract Numerical simulation and analysis of aerodynamic characteristics of Soyuz ablation shape is carried out in this paper for the adverse influence coming from recession. The result indicates that the shape change caused by the recession will...
2015 / Xu Guowu, Zhou Weijiang, Chen Bingyan, Zhan Huiling, Yang Yunjun -
Characterization of surface textures generated on hardened steel parts in high-precision machining operations2015 / W. Grzesik, J. Rech, K. Żak
-
Estimation of leak rate through circumferential cracks in pipes in nuclear power plants
Abstract The leak before break (LBB) concept is widely used in designing pipe lines in nuclear power plants. According to the concept, the amount of leaking liquid from a pipe should be more than the minimum detectable leak rate of a leak detection...
2015 / Jai Hak Park, Young Ki Cho, Sun Hye Kim, Jin Ho Lee -
Disturbance observer-based control for missile non-strapdown seeker disturbance rejection2016 / T. Song, D. Lin, J. Wang
-
Economic design of Hotelling’s T 2 control chart on the presence of fixed sampling rate and exponentially assignable causes2014 / Ehsan Bahiraee, Sadigh Raissi
-
A joint optimization strategy for scale-based product family positioning2014 / Yangjian Ji, Tianyin Tang, Chunyang Yu, Guoning Qi
-
Numerical study of entropy generation for forced convection flow and heat transfer of a Jeffrey fluid over a stretching sheet
Abstract Entropy generation for the steady two-dimensional laminar forced convection flow and heat transfer of an incompressible Jeffrey non-Newtonian fluid over a linearly stretching, impermeable and isothermal sheet is numerically investigated....
2014 / Nemat Dalir -
Color Image Evaluation for Small Space Based on FA and GEP2014 / Li Deng, Sui-Huai Yu, Wen-Jun Wang, Jun-Xuan Chen, Guo-Chang Liu
-
Numerical Simulation of Sloshing in 2D Rectangular Tanks Based on the Prediction of Free Surface2014 / Haitao Zhang, Beibei Sun
-
Research on Control Methods of Brake Resistance of HEV
Abstract The brake resistance is a key component to ensure the safety and reliability of Hybrid Electric Vehicles(HEV). The mathematical models of electric brake system and control methods of brake resistance are researched in this paper. The key...
2011 / Wang Weida, Yuan Lijuan, Xiang Changle, Ma Yue -
Characteristics of LPG-diesel dual fuelled engine operated with rapeseed methyl ester and gas-to-liquid diesel fuels
Abstract A Liquefied Petroleum Gas (LPG)-diesel dual fuelled combustion experimental study was carried out to understand the impact of the properties of the direct injection diesel fuels, such as rapeseed methyl ester (RME) and gas-to-liquid (GTL),...
2012 / H.S. Tira, J.M. Herreros, A. Tsolakis, M.L. Wyszynski -
Numerical Study of Natural Ventilation Through a Roof Cavity for Reduction of Solar Heat Gain
Abstract The thermal performance of a building is a major requirement to have a comfortable interior climate. Current standards of construction advice to make an open thermosyphon system into the roof under the tiles. This reduces the cost of the...
2012 / D. Ababsa, S. Bougoul -
Reduction of scour around bridge piers using a modified method for vortex reduction
Abstract The current study presents a modified method to reduce the scour depth in front of the bridge piers. The idea of this method is based on reducing the stagnation of the flow and vortex formation in front of the pier. Therefore, the pressure...
2013 / Entesar A.S. EL-Ghorab -
Laser Beam Polishing of Quartz Glass Surfaces
Abstract The laser beam is a small, flexible and fast polishing tool. With laser radiation it is possible to finish many outlines or geometries on quartz glass surfaces in the shortest possible time. It's a fact that the temperature developing while ...
2011 / Jörg Hildebrand, Kerstin Hecht, Jens Bliedtner, Hartmut Müller -
Knowledge Structuring and Simulation Modeling for Product Development
Abstract This paper proposes a new approach based on knowledge structures for building simulation models. The target are products to be redesigned integrating new technologies. The main idea of the approach is to limit the development of an analysis ...
2012 / J.M. Jauregui-Becker, W.W. Wits