Mechanical engineering topic list of research papers
-
Study on the performance of natural vacuum desalination system using low grade heat source
Abstract In the present work characteristics and performance of a natural vacuum desalination system using low grade heat source is studied numerically and experimentally. In the numerical work, a program to solve the governing equations in forward...
2016 / Himsar Ambarita -
Non-linear Seventeen Degrees of Freedom Ride Dynamics Model of a Full Tracked Vehicle in simMechanics
Abstract Ride dynamics models may be used to study the vehicle vibration levels over various terrain conditions. In the present work, the tracked vehicle, containing 17 dof with 14 suspension stations along with an additional driver's seat bounce...
2016 / N. Venkatasubramanian, Saayan Banerjee, V. Balamurugan -
Mathematical modeling of entropy generation in magnetized micropolar flow between co-rotating cylinders with internal heat generation
Abstract The present study investigates the entropy generation in magnetized-micropolar fluid flow in between two vertical concentric rotating cylinders of infinite length. The surface of the inner cylinder is heated while the surface of the outer...
2016 / Srinivas Jangili, Nagaraju Gajjela, O. Anwar Bég -
CS-PSO: chaotic particle swarm optimization algorithm for solving combinatorial optimization problems2016 / Xiaolong Xu, Hanzhong Rong, Marcello Trovati, Mark Liptrott, Nik Bessis
-
A Study of Collision Risk Estimation and Users Evaluation at Merging Section of Urban Expressway in Japan
Abstract For usability of urban expressway in Japan, there are some problems due to the limitation of spatial con-straint. As the result of the limitation, there are merging sections that do not have enough length and set a right-side entrance ramp...
2016 / Koji Suzuki, Kazuki Imada, Yuki Matsumura -
Estimation of Center of Gravity Position for Distributed Driving Electric Vehicles Based on Combined H∞-EKF Method
Abstract It is essential to get the accurate knowledge of the center of gravity (CG) for the vehicle dynamics control systems, especially for distributed driving electric vehicles (DDEV), whose CG positions can be affected by the loading conditions. ...
2016 / Cheng Lin, Xingqun Cheng, Hong Zhang, Xinle Gong -
Analysis of the Kinematic Accuracy Reliability of a 3-DOF Parallel Robot Manipulator2015 / Guohua Cui, Haiqiang Zhang, Dan Zhang, Feng Xu
-
Manufacturing Integrated Algorithm-Based Product Design – Case Study of a Snap-Fit Fastening
Abstract Integrated product design in manufacturing aims to comprehensively tap manufacturing potential for higher durability, lightweight design and additional functional benefits in the realized product. This paper introduces an approach for...
2016 / Michael Roos, Benjamin Horn, Sebastian Gramlich, Stefan Ulbrich, Hermann Kloberdanz -
CompaRob: The Shopping Cart Assistance Robot2016 / Jorge Sales, Jose V. Martí, Raúl Marín, Enric Cervera, Pedro J. Sanz
-
Principles of Formation of Stability of Construction Projects
Abstract The article considers the stages of formation of the concept of stability, as well as the processes and elements that make up the concept of “sustainability of construction projects”. The authors propose to consider...
2016 / A. Volkov, L. Shilova -
Aerodynamic Modeling of Floating Vertical Axis Wind Turbines Using the Actuator Cylinder Flow Method
Abstract Recently the interest in developing vertical axis wind turbines (VAWTs) for offshore application has been increasing. Among the aerodynamic models of VAWTs, double multi-streamtube (DMST) and actuator cylinder (AC) models are two favorable...
2016 / Zhengshun Cheng, Helge Aagaard Madsen, Zhen Gao, Torgeir Moan -
Cartesian Control of a 3-DOF Electro- pneumatic Actuated Motion Platform with Exteroceptive Pose Measurement2012 / Eduardo Izaguirre, Luis Hernandez, Ernesto Rubio, Orlando Urquijo
-
Mathematical Model of Piston Ring Sealing in Combustion Engine2015 / Grzegorz Koszałka, Mirosław Guzik
-
Prediction and reduction in vehicle noise by frequency response function-based substructuring2016 / H.-M. Noh
-
On a Miniature Free-swimming Robotic Fish with Multiple Sensors2016 / Junzhi Yu, Shifeng Chen, Zhengxing Wu, Weibing Wang
-
Quantitative Analysis of Grinding Wheel Loading Using Image Processing
Abstract Grinding is an abrasive machining process which can produce very fine surface finishes. The removed chips from the workpiece which get welded to the porosities between the abrasive grains can adversely affect the final surface finish of the ...
2016 / Vipin Gopan, K. Leo Dev Wins -
A Millimetre-sized Robot Realized by a Piezoelectric Impact-type Rotary Actuator and a Hardware Neuron Model2014 / Minami Takato, Masaki Tatani, Hirozumi Oku, Yuki Okane, Junichi Tanida, et al.
-
Modeling of Injection Parameters for Diesel Engine Injector Nozzles with the Additional Precision Guiding Interface
Abstract Perfection of output parameters of diesel engines is considered as a result of the rail-pressure increase and modernization of nozzle tribosystems represented at high (up to 300 MPa) values of the fuel pressure. The nozzle with the modified ...
2016 / V. Lazarev, G. Lomakin, E. Lazarev -
Review on monolayer CBN superabrasive wheels for grinding metallic materials
Abstract A state-of-the-art review on monolayer electroplated and brazed cubic boron nitride (CBN) superabrasive wheels for grinding metallic materials has been provided in this article. The fabrication techniques and mechanisms of the monolayer CBN ...
2016 / Wenfeng Ding, Barbara Linke, Yejun Zhu, Zheng Li, Yucan Fu, et al. -
A New 1D/3D Model of Conjugate Heat Transfer in Waterwall Tubes of Power Boiler Combustion Chamber
Abstract The paper presents the mathematical model for simulating heat transfer processes in waterwalls of supercritical steam boilers combustion chambers. The model is based on the distributed parameters. The proposed model enabling on-line...
2016 / Wiesław Zima, Marzena Nowak-Ocłoń