Mechanical engineering topic list of research papers
-
Numerical Analysis including Pressure Drop in Oscillating Water Column Device2015 / Mateus das Neves Gomes, Elizaldo Domingues dos Santos, Liércio André Isoldi, Luiz Alberto Oliveira Rocha
-
Simulation of Forced Convection a Boundary Element Method for the Laminar Viscous Dissipation of Flow through a Straight Regular Polygonal Duct with Uniform Heat Flux
Abstract The paper presents a numerical study to investigate the effect of the viscous dissipation of laminar flow through a straight regular polygonal duct on the forced convection with constant axial wall heat flux with constant peripheral wall...
2016 / Tomasz Janusz Teleszewski, Slawomir Adam Sorko -
Entropy generation in a condenser and related correlations2015 / Rafał Askowski, Maciej Jaworski, Adam Smyk
-
Improving Gas Cooling Technology at its Compression in the Booster Compressor Station
Abstract Improving the efficiency of gas air-cooling units of compressor stations requires consideration of a whole complex of varying parameters and appropriate regulation when there is decline in reservoir pressure and gas production volume in the ...
2016 / I.A. Yanvarev, A.D. Vanyashov, A.V. Krupnikov -
Robust fault-tolerant control for wing flutter under actuator failure
Abstract Many control laws, such as optimal controller and classical controller, have seen their applications to suppressing the aeroelastic vibrations of the aeroelastic system. However, those control laws may not work effectively if the...
2016 / Mingzhou Gao, Guoping Cai -
A Kinematic Process Model and Investigation of Surface Roughness for High Efficiency Dry Grinding
Abstract A grinding process model based on a kinematic modeling approach is presented. A unique experimental set-up is designed for validation purposes allowing table feed rates of up to 480 m/min. Modeling and experimental verifications are carried ...
2016 / Michal Kuffa, Simon Züger, Fredy Kuster, Konrad Wegener -
Optimization of a twin-skeg container vessel by parametric design and CFD simulations2016 / Jingpu Chen, Jinfang Wei, Wujie Jiang
-
Feature Selection and Parameter Optimization of Support Vector Machines Based on Modified Cat Swarm Optimization2015 / Kuan-Cheng Lin, Yi-Hung Huang, Jason C. Hung, Yung-Tso Lin
-
Application of zero-dimensional thermodynamic model for predicting combustion parameters of CI engine fuelled with biodiesel-diesel blends
Abstract Biodiesel from non-edible vegetable oil seems to be a promising alternate for petro-diesel in the present energy scenario. This study analyses the experimental and theoretical effects on the blends of Bee Wax biodiesel with straight diesel...
2016 / V. Hariram, R. Bharathwaaj -
Real Time Trajectory Correction System Of Optical Head In Laser Welding2016 / Wojciech Cieszyński, Michał Zięba, Jacek Reiner
-
Effects of boundary layer and liquid viscosity and compressible air on sloshing characteristics2015 / Chang-Fang Zou, De-Yu Wang, Zhong-Hua Cai
-
A Method For Producing Hollow Shafts By Rotary Compression Using A Specially Designed Forging Machine2015 / J. Tomczak, T. Bulzak, Z. Pater
-
Distributed Wireless Measurement System for Transient Pressure with Data Extraction Technology2015 / Wenlian Wang, Jinwen Zhang, Zhijie Zhang
-
Mathematical Model Defining Volumetric Losses of Hydraulic Oil Compression in a Variable Capacity Displacement Pump2015 / Zygmunt Paszota
-
Effects of heterogeneity and load amplitude on fatigue rate prediction of a welded joint2016 / C. Zhang, J. Hui, P. Lu, X. Hu, J. Liang
-
Impact Load of Welds After Micro-Jet Cooling / Dynamiczne Obciążenie Spoin Chłodzonych Mikrojetowo2016 / D. Hadryś
-
A comparison of experimental results of soot production in laminar premixed flames2015 / Nattan R. Caetano, Diego Soares, Roger P. Nunes, Fernando M. Pereira, Paulo Smith Schneider, et al.
-
Inverse Kinematics and Model Calibration Optimization of a Five-D.O.F. Robot for Repairing the Surface Profiles of Hydraulic Turbine Blades2016 / Jose Mauricio S.T. Motta, Carlos Humberto Llanos-Quintero, Renato Coral Sampaio
-
The Thermo-Gas-Dynamic Modeling of Afterburning Turbofan Engine for High Maneuverable Aircraft Combined with Its Automatics
Abstract The article considers modeling of aviation afterburning turbofan engine combined with its electrohydromechanical automatic control systems, supervision and diagnostics for high maneuverable aircraft. It describes an aviation engine and its...
2016 / I.A. Krivosheev, D.G. Kozhinov, A.E. Kishalov -
On the influence of conformity on wheel–rail rolling contact mechanics
Abstract The aim of this work is to assess the effects of conformity on local contact related quantities at the wheel–rail interface such as traction distributions, subsurface stresses and frictional work distributions. For this purpose conformal...
2016 / Julio Blanco-Lorenzo, Javier Santamaria, Ernesto G. Vadillo, Nekane Correa