Mechanical engineering topic list of research papers
-
Visual Tracking in Unknown Environments Using Fuzzy Logic and Dead Reckoning2016 / Mohamed Amine Mekhtiche, Zoubir Abdeslem Benselama, Mohamed Abdelkader Bencherif, Mohammed Zakariah, Mansour Alsulaiman, et al.
-
A Robotic Solution for the Restoration of Fresco Paintings2015 / Marco Ceccarelli, Francisco Blanco-Moreno, Giuseppe Carbone, Pilar Roig, Michela Cigola, et al.
-
Numerical investigation of combined buoyancy-thermocapillary convection and entropy generation in 3D cavity filled with Al2O3 nanofluid
Abstract Heat transfer, fluid flow and entropy generation due to combined buoyancy and thermocapillary forces in a 3D differentially heated enclosure containing Al2O3 nanofluid are carried out for different Marangoni numbers and different...
2016 / Lioua Kolsi, Emtinene Lajnef, Walid Aich, Abdulaziz Alghamdi, Mohamed Ahmed Aichouni, et al. -
Study on Solar KANG Heating System for Cold Areas
Abstract The current rural traditional heated kang cannot meet people's increasing requirements of comfort and environmental protection. This paper propose solar kang heating system in cold regions. System performance and heating effect were...
2016 / Guohui Feng, Qian Wang, Gang Li, Xiaolong Xu -
Experimental Investigation for RUAV’s Actuator Fault Detections with AESMF2015 / Dalei Song, Juntong Qi, Liying Yang, Jianda Han
-
Material feature representation and identification with composite surfacelets
Abstract Computer-aided materials design requires new modeling approaches to characterize and represent fine-grained geometric structures and material compositions at multiple scales. Recently, a dual-Rep approach was developed to model materials...
2016 / Wei Huang, Yan Wang, David W. Rosen -
Embedded vision equipment of industrial robot for inline detection of product errors by clustering-classification algorithms2016 / K. Zidek, V. Maxim, J. Pitel, A. Hosovsky
-
Research and Application of Flue Gas Waste Heat Recovery in Co-generation Based on Absorption Heat-exchange
Abstract For gas cogeneration system, there are problems to be solved. There is great heat transfer temperature difference in the heat-exchange progress. It can cause huge irreversible loss of heat transfer. More seriously, exhaust temperature of...
2016 / Feng Li, Lin Duanmu, Lin Fu, Xi ling Zhao -
Gel performance in rheology and profile control under low-frequency vibration: coupling application of physical and chemical EOR techniques2016 / Li Ming Zheng, Chun Sheng Pu, Jing Liu, Bo Ma, Nasir Khan
-
Expected impact quantification-based reliability assessment methodology for Chilean copper smelting process: A case study2016 / F. Kristjanpoller, A. Crespo, P. Viveros, L. Barbera
-
Improving Error Models of Machine Tools with Metrology Data
Abstract As the manufacturing community embraces the use of a variety of metrology solutions, the availability and quantity of measurement data is increasing. The tendency towards connectedness between manufacturing resources may also provide a...
2016 / J.M. Flynn, J.E. Muelaner, V. Dhokia, S.T. Newman -
An Improved Axiomatic Design Approach in Distributed Resource Environment, Part 1: Toward Functional Requirements to Design Parameters Transformation
Abstract How to transform Functional Requirements (FRs) into Design Parameters (DPs) plays a key role in using the Axiomatic Design (AD) theory. However, the AD theory does not provide such an approach to support the transformation from FRs to DPs....
2016 / Jun Liu, Bin Chen, Youbai Xie -
Drag reduction of a rapid vehicle in supercavitating flow2016 / D. Yang, Y.L. Xiong, X.F. Guo
-
Application of Numerical Methods for Calculation of Working Processes in Pneudraulic Devices
Abstract This article is devoted to the development of a combined method for working processes calculation in pneudraulic devices. The method is based on execution of interrelation between the mathematical models of the work processes in...
2016 / V.A. Vasilieva, A.V. Chernyshev -
Numerical Study on Coolant Flow Distribution at the Core Inlet for an Integral Pressurized Water Reactor
Abstract When an integral pressurized water reactor is operated under low power conditions, once-through steam generator group operation strategy is applied. However, group operation strategy will cause nonuniform coolant flow distribution at the...
2016 / Lin Sun, Minjun Peng, Genglei Xia, Xing Lv, Ren Li -
A numerical analysis of a composition-adjustable Kalina cycle power plant for power generation from low-temperature geothermal sources
Abstract The Kalina cycle is believed to be one of the most promising technologies for power generation from low temperature heat sources such as geothermal energy. So far, most Kalina cycle power plants are designed with a working fluid mixture...
2016 / Enhua Wang, Zhibin Yu -
Axiomatic Design Method for Supercritical Rotor Dynamics Integrating Nonlinear Deep Knowledge
Abstract This paper integrates nonlinear deep knowledge with an axiomatic design method for supercritical rotor dynamics in order to overcome the limitation of rotor dynamic design for supercritical rotating machineries. Design methods based on...
2016 / Yingze Jin, Zhaoyang Shi, Honglun Hong, Fan Zhang, Xiaoyang Yuan -
Testing of parameters of proposed robotic wrist based on the precision modules2016 / J. Semjon, M. Hajduk, M. Sukop, V. Balaz, Z. Pilat, et al.
-
Investigation of the Time-invariance and Causality of a Machine Tool for Performing Operational Modal Analysis
Abstract The dynamic behaviour of machine tools affects the work-piece quality and productivity. Generally, the difference between the dynamic properties at standstill and during machining is neglected by the commonly applied assessment methods for...
2016 / Matthias Putz, Volker Wittstock, Martin Kolouch, Jan Berthold -
Multi-agent Orbit Design for Visual Perception Enhancement Purpose2014 / Hamidreza Nourzadeh, John McInroy