Mechanical engineering topic list of research papers
-
Experimentation of a LiBr-H2O absorption process for long term solar thermal storage
Abstract The heat storage by absorption process that is studied in the paper is devoted to building heating. A prototype has been built and tested in static and dynamic operating conditions that are compatible with domestic solar thermal collectors. ...
2012 / Kokouvi Edem N’Tsoukpoe, Nolwenn Le Pierrès, Lingai Luo -
IDO most superior pattern recognition model and its application in the safety assessment of the coal mine
Abstract GSPA is introduced. From certainty and uncertainty, measured indicator sets of assessing samples and standard sets are as set pair, and the method to determine the connection degree is discussed, as for some indicator, if it is in this...
2011 / Li De-shun, Xu Kai-li -
Single Walled Carbon Nanotube for Sensing Small Molecules
Abstract We present an analytical model for investigating pressure dependence of the radial mode resonant frequencies of single walled carbon nanotube (SWCNT). Mechanical shell model is used to in the calculation. SWCNTs with 1nm and 10nm radiuses...
2012 / Chengyuan Wang, Lijie Li -
Direct Surge Margin Control for Aeroengines Based on Improved SVR Machine and LQR Method2013 / Haibo Zhang, Fengyong Sun
-
Explicit Dynamic Finite Element Method for Predicting Implosion/Explosion Induced Failure of Shell Structures2013 / Jeong-Hoon Song, Patrick Lea, Jay Oswald
-
Proposal of Damping Function for Low-Reynolds-Number - Model Applicable in Prediction of Turbulent Viscoelastic-Fluid Flow2013 / Takahiro Tsukahara, Yasuo Kawaguchi
-
Structure and Microhardness of Cu-Ta Joints Produced by Explosive Welding2013 / Iu. N. Maliutina, V. I. Mali, I. A. Bataev, A. A. Bataev, M. A. Esikov, et al.
-
Ultrasonic Flaw Detection for Quality Assessment of Explosively Clad Plates2014 / Bogumił Wronka
-
Study on Emission and Performance of Diesel Engine Using Castor Biodiesel2014 / Md. Saiful Islam, Abu Saleh Ahmed, Aminul Islam, Sidek Abdul Aziz, Low Chyi Xian, et al.
-
Prediction and Analysis of Engine Friction Power of a Diesel Engine Influenced by Engine Speed, Load, and Lubricant Viscosity2014 / Devendra Singh, Fengshou Gu, John D. Fieldhouse, Nishan Singh, S. K. Singal
-
Development of a Flat Type Six-Axis Stage Based on Piezoelectric Actuators2014 / Hau-Wei Lee, Tsung-Ting Hsieh, Chin-Chia Liu, Chien-Hung Liu
-
External Aerodynamics Simulations in a Rotating Frame of Reference2014 / Filomena Cariglino, Nicola Ceresola, Renzo Arina
-
Characterization of Material Stiffness on Injection Moulded Microspecimens Using Different Test Methods2014 / Dietmar Drummer, Andreas Seefried, Steve Meister
-
Innovative Solar Tracking Concept by Rotating Prism Array2014 / Héctor García, Carlos Ramírez, Noel León
-
Damage Localization of Cable-Supported Bridges Using Modal Frequency Data and Probabilistic Neural Network2014 / X. T. Zhou, Y. Q. Ni, F. L. Zhang
-
Experimental and Numerical Investigation of Preferential Flow in Fractured Network with Clogging Process2014 / Xiaobing Chen, Jian Zhao, Li Chen
-
Impacts of Deflection Nose on Ballistic Trajectory Control Law2014 / Bo Zhang, Shushan Wang, Mengyu Cao, Yuxin Xu
-
Effect of hydroxy (HHO) gas addition on gasoline engine performance and emissions
Abstract The objective of this work was to construct a simple innovative HHO generation system and evaluate the effect of hydroxyl gas HHO addition, as an engine performance improver, into gasoline fuel on engine performance and emissions. HHO cell...
2015 / Mohamed M. EL-Kassaby, Yehia A. Eldrainy, Mohamed E. Khidr, Kareem I. Khidr -
Development of a Steam Jet Refrigeration Cycle for the Actual Application Driven by Low Grade Thermal Energy
Abstract The aim of this paper is to develop the jet refrigerator and test it under the actual ambient condition in Thailand. The prototype steam jet refrigerator with a cooling capacity of 3000W is newly designed and constructed. It is driven by...
2014 / Tongchana Thongtip, Natthawut Ruangtrakoon, Satha Aphornratana -
Dynamic Contribution Analysis of Tennis-serve-motion in Consideration of Torque Generating Mode
Abstract The purpose of this study was to quantify dynamic functional roles of upper body joint torques to the generation of racket head speed in consideration of the joint torque generating mode in the tennis serve motion. The upper body with a...
2014 / Sekiya Koike, Yuhei Harada