Mechanical engineering topic list of research papers
-
Demand-oriented Reform on Cultivating Mode of Safety Management Students
Abstract Safety engineering undergraduates in our university who are engaged in enterprise's safety management accounted for 39.38% from 2004 to 2013. To make these safety management talents more qualified for enterprise, the enterprises’ demand of...
2014 / Zhang Jiangshi, Xiong Hongqin, Zhang Xiu, Zhang Xiaoli -
A novel 1D/2D model for simulating conjugate heat transfer applied to flow boiling in tubes with external fins2014 / Paweł Ocłoń, Stanisław Łopata, Marzena Nowak
-
Implementation of A Geometric Constraint Regularization For Multibody System Models2014 / Andreas Müller
-
Vision-based bio-inspired guidance law for small aerial vehicle
Abstract During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is...
2014 / Zhengjie Wang, Weilin Huang, Yonghong Yan -
Load-bearing ability of the mosquito tarsus on water surfaces arising from its flexibility2015 / X. Q. Kong, J. L. Liu, W. J. Zhang, Y. D. Qu
-
Metrics-based Sustainability Evaluation of Cryogenic Machining
Abstract Cryogenic machining is considered as the most sustainable alternative to conventional flood-cooled, near-dry and dry machining approaches in machining processes. This paper presents the application of a sustainability evaluation methodology ...
2015 / Tao Lu, I.S. Jawahir -
Finite Element Analysis for Fatigue Damage Reduction in Metallic Riveted Bridges Using Pre-Stressed CFRP Plates2014 / Elyas Ghafoori, Gary Prinz, Emmanuel Mayor, Alain Nussbaumer, Masoud Motavalli, et al.
-
A High-Pressure Bi-Directional Cycloid Rotor Flowmeter2014 / Shuo Liu, Fan Ding, Chuan Ding, Zaipeng Man
-
Sample Entropy-Based Approach to Evaluate the Stability of Double-Wire Pulsed MIG Welding2014 / Ping Yao, JiaXiang Xue, Kang Zhou, XiaoJun Wang
-
A Method Based on Multi-Sensor Data Fusion for Fault Detection of Planetary Gearboxes2012 / Yaguo Lei, Jing Lin, Zhengjia He, Detong Kong
-
Fuzzy-Entropy Theory Comprehensive Evaluation Method and Its Application in Building Construction Safety
Abstract In order to improve the safety management level of construction site, a new kind of safety evaluation method using the combination of fuzzy mathematics and the entropy theory was put forward. According to the hierarchical analysis, the...
2012 / Liu Dunwen, Yu Lei, Li Bo -
The Effects of Magnetic Field on the Fluid Flow through a Rotating Straight Duct with Large Aspect Ratio
Abstract This paper presents a numerical study of an investigation of a fluid flow through a rotating rectangular straight duct in the presence of magnetic field. The straight duct of rectangular cross-section rotates at a constant angular velocity...
2013 / Md. Kamruzzaman, Mohammad Wahiduzzaman, Md. Mahmud Alam, Lyazid Djenidi -
Prediction Model for Rotary Kiln Coal Feed Based on Hybrid SVM
Abstract A SVM (Support Vector Machine) classification for rotary kiln based on time series trend characteristics was presented in this paper. The amount of coal feed depended on its trends which were predicted by the dynamic rules of rotary kiln...
2011 / Xiaogang Zhang, Jingjing Zhao -
Abrasion Monitoring and Automatic Chatter Detection in Cylindrical Plunge Grinding
Abstract Using conventional grinding wheels, wheel-sided chatter vibration is one of the limiting factors in terms of productivity and surface fin-ish. Initial vibration related to the dynamic behavior of the machine tool copy on the grinding wheel...
2013 / M. Ahrens, R. Fischer, M. Dagen, B. Denkena, T. Ortmaier -
Microcutting Force Prediction by Means of a Slip-line Field Force Model
Abstract Mechanical micromachining is a very flexible and widely exploited process, but its knowledge should still be improved since several typical phenomena play a role on the microscale chip removal (e.g. “minimum chip thickness effect”,...
2013 / M. Annoni, G. Biella, L. Rebaioli, Q. Semeraro -
Numerical investigation on jet interaction with a compression ramp
Abstract A numerical investigation on jet interaction in supersonic laminar flow with a compression ramp is performed utilizing the AUSMDV scheme and a parallel solver. Several parameters dominating the interference flowfield are studied after...
2013 / Huaping Zhen, Zhenxun Gao, Chunhian Lee -
FEM-Modelling of the Thermal Workpiece Deformation in Dry Turning
Abstract The substitution of wet machining processes by dry processes is an important development in manufacturing technology. A central challenge is the significant higher heating and thus the resulting thermal expansion of the workpiece which...
2013 / F. Klocke, D. Lung, H. Puls -
Stability and Bifurcation in Multi-Scaled Stochastic Mechanics
Abstract This paper investigates simulation schemes of high order and correspondingly extended covariance equations. Both are derived by multiply iterated integrals and applied to road-vehicle systems. To avoid numerical instabilities for infinitely ...
2013 / Walter V. Wedig -
Acoustic performance of industrial mufflers with CAE modeling and simulation2015 / Soohong Jeon, Daehwan Kim, Chinsuk Hong, Weuibong Jeong
-
Time-domain computation of multimode propagation in an aeroengine duct
Abstract Accurate computation of multimode propagation in and radiation from a turbofan duct is important for aircraft noise prediction. A formulation of linearised Euler equations (LEE) is proposed for efficient computation. Its solutions are...
2010 / Xin Zhang, Xiaoxian Chen