Mechanical engineering topic list of research papers
-
Research of the Localization of Restaurant Service Robot2012 / Yu Qing-xiao, Yuan Can, Fu Zhuang, Zhao Yan-zheng
-
The Flexibility of Pusher Furnace Grate2016 / J.A. Słowik, A. Drotlew, B. Piekarski
-
Application of Adomian Modified Decomposition Method to Free Vibration Analysis of Rotating Beams2013 / Qibo Mao
-
Micromechanical Formulation of the Yield Surface in the Plasticity of Granular Materials2013 / Homayoun Shaverdi, Mohd. Raihan Taha, Farzin Kalantary
-
A Fuzzy-Neural Ensemble and Geometric Rule Fusion Approach for Scheduling a Wafer Fabrication Factory2013 / Hsin-Chieh Wu, Toly Chen
-
Influences of Holes Arrangement on Creep Characteristic of Nickel-Base Single Crystal Alloy Blade Cooling Holes2013 / Lei Li, Liangbo Ao, Gongnan Xie, Xinmei Wang, Gang Cao
-
A New Fuzzy Inference Technique for Singleton Type-2 Fuzzy Logic Systems2012 / Hwan-Joo Kwak, Dong-Won Kim, Gwi-Tae Park
-
Viscoelastic-Viscoplastic Modelling of the Scratch Response of PMMA2013 / G. Kermouche, N. Aleksy, J. M. Bergheau
-
A Novel Numerical Algorithm for Optimal Sizing of a Photovoltaic/Wind/Diesel Generator/Battery Microgrid Using Loss of Load Probability Index2013 / Hussein A. Kazem, Tamer Khatib
-
Surface Effects on the Vibration and Buckling of Double-Nanobeam-Systems2011 / Dong-Hui Wang, Gang-Feng Wang
-
Observer Based Road-Tire Friction Estimation for Slip Control of Braking System
Abstract In this paper the friction coefficient at contact surface of the road and tire of ground vehicle has been estimated for the anti-lock braking system. The non-linear Dugoff's friction model has been taken here to characterize the tire...
2012 / Nilanjan Patra, Kalyankumar Datta -
Nonlinear Modeling of Azimuth Error for 2D Car Navigation Using Parallel Cascade Identification Augmented with Kalman Filtering2010 / Umar Iqbal, Jacques Georgy, Michael J. Korenberg, Aboelmagd Noureldin
-
Design of Novel Compound Fresnel Lens for High-Performance Photovoltaic Concentrator2011 / Lei Jing, Hua Liu, Huifu Zhao, Zhenwu Lu, Hongsheng Wu, et al.
-
Trajectory Generation Model-Based IMM Tracking for Safe Driving in Intersection Scenario2010 / Tingting Zhou, Ming Li, Xiaoming Mai, Qi Wang, Fang Liu, et al.
-
Risk-Based Predictive Maintenance for Safety-Critical Systems by Using Probabilistic Inference2013 / Tianhua Xu, Tao Tang, Haifeng Wang, Tangming Yuan
-
Integrated Monitoring System Design of Hybrid Air-compressors
Abstract A hybrid air-compressors integrated monitoring system has been developed basing on the retrofit of air-compressor control system in a certain mine of Shandong province. The air pressure principle and the same operation load rate principle...
2011 / Huibin Liang, Xuehua Li -
Analysis of Aerodynamic Load Effect on Thin Plat Section in Multiple Fan Active Control Wind Tunnel
Abstract In atmospheric boundary, the power spectral density of turbulent wind simulated passively by the grid layer is regulated difficultly with the problem of smaller integral length of turbulence. For the advantage of active control method in...
2011 / T. Pan, L. Zhao, S.Y. Cao, Y.J. Ge, S. Ozono -
Calculation of laser induced impulse based on the laser supported detonation wave model with dissociation, ionization and radiation2014 / Li Gan, Cheng Mousen, Li Xiaokang
-
The Development of using the digital projection method to measure the contact angle of ball screw
Abstract The ball screw frequently used to drive or translate the parts on the precision machine, such as machine tool and motorized stage. Therefore they were most frequently used on the precision machine, semiconductor equipment, medical...
2011 / Chun-Jen Chen, Wenyuh Jywe, Yu-Chun Liu, Hsin-Hong Jwo -
Visual feedback control of a robot in an unknown environment (learning control using neural networks)2004 / Xiao Nan-Feng, Saeid Nahavandi