Mechanical engineering topic list of research papers
-
Scheduling and sequencing in four machines robotic cell: Application of genetic algorithm and enumeration techniques
Abstract The introduction of robotic cells to manufacturing systems improved the efficiency, productivity and reliability of the system. The main objective of the scheduling problem of multi-item multi-machine robotic cells is the identification of...
2013 / M.M.S. Abdulkader, M.M. ElBeheiry, N.H. Afia, A.K. El-Kharbotly -
Parachute dynamics and perturbation analysis of precision airdrop system
Abstract To analyze the parachute dynamics and stability characteristics of precision airdrop system, the fluid–structure interaction (FSI) dynamics coupling with the flight trajectory of a parachute–payload system is comprehensively predicted by...
2016 / Xinglong Gao, Qingbin Zhang, Qiangang Tang -
Stability analysis of liquid filled spacecraft system with flexible attachment by using the energy–Casimir method
Abstract The stability of partly liquid filled spacecraft with flexible attachment was investigated in this paper. Liquid sloshing dynamics was simplified as the spring–mass model, and flexible attachment was modeled as the linear shearing beam. The ...
2016 / Yulong Yan, Baozeng Yue -
Numerical study of corner separation in a linear compressor cascade using various turbulence models
Abstract Three-dimensional corner separation is a common phenomenon that significantly affects compressor performance. Turbulence model is still a weakness for RANS method on predicting corner separation flow accurately. In the present study,...
2016 / Yangwei Liu, Hao Yan, Yingjie Liu, Lipeng Lu, Qiushi Li -
Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor
Abstract The tip leakage flow has an important influence on the performance of transonic compressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade...
2016 / Shaobing Han, Jingjun Zhong -
Numerical Procedure for Optimizing Dye-Sensitized Solar Cells2014 / Mihai Razvan Mitroi, Laurentiu Fara, Magdalena Lidia Ciurea
-
Speaker adaptation in the maximum a posteriori framework based on the probabilistic 2-mode analysis of training models2013 / Yongwon Jeong
-
Impact of non-petroleum vehicle fuel economy on GHG mitigation potential2016 / Jason M Luk, Bradley A Saville, Heather L MacLean
-
Mobile and CAD Technology Integration in Producing a Creative Product
Abstract The purpose of this research is to examine the effect of integrating mobile and CAD technology on designing process of Malaysian polytechnic architecture students. This study utilized a quasi-experimental method. The sample comprises of...
2010 / Isham Shah Hassan, Mohd Arif Ismail, Ramlee Mustapha -
The Bi-Directional Prediction of Carbon Fiber Production Using a Combination of Improved Particle Swarm Optimization and Support Vector Machine2014 / Chuncai Xiao, Kuangrong Hao, Yongsheng Ding
-
Control System for Electro-hydraulic Synchronization on RBPT
Abstract In industrial manufacturing systems, situations are often encounters in which motion with two, three or more hydraulic cylinder actuators need to be synchronized. The need for the design of a reconfigurable bending press tool (RBPT) control ...
2014 / Olukorede Tijani Adenuga, Khumbulani Mpofu -
Preliminary Numerical Study on TRID System for Flutter Vibration Control of Bridge Structure
Abstract Based on the recently proposed innovative Tuned Rotary Inertia Damper (abbreviated as TRID) control system, the possibility of its application for the wind induced flutter vibration control of long span bridge structure is discussed in this ...
2011 / C.W. Zhang, J.L. Li, H. Li, J.P. Ou -
Electrohydrodynamic Instability of Two Thin Viscous Leaky Dielectric Fluid Films in a Porous Medium2011 / M. F. El-Sayed, M. H. M. Moussa, A. A. A. Hassan, N. M. Hafez
-
Numerical investigation of the energy performance of a guideless irregular heat and mass exchanger with corrugated heat transfer surface for dew point cooling
Abstract The paper presents an investigation into the energy performance of a novel irregular heat and mass exchanger for dew point cooling which, compared to the existing flat-plate heat exchangers, removed the use of the channel supporting guides...
2016 / Peng Xu, Xiaoli Ma, Thierno M.O. Diallo, Xudong Zhao, Kevin Fancey, et al. -
WSNs-Based Mechanical Equipment State Monitoring and Fault Diagnosis in China2015 / Jianfeng Huang, Guohua Chen, Lei Shu, Qinghua Zhang, Xiaoling Wu
-
Thermoelasticity of thin shells based on the time-fractional heat conduction equation2013 / Yuriy Povstenko
-
Flying Control and Safety on Plateau Airports
Abstract This paper analyzes the various factors affecting the flying safety and flight control on plateau airports, and the problems of flying at plateau airports, pointed out the necessity to modify the pilot model on plateau airport hypoxia...
2011 / Zhang Ziyan -
Estimation of Leak Rate Through Cracks in Bimaterial Pipes in Nuclear Power Plants
Abstract The accurate estimation of leak rate through cracks is crucial in applying the leak before break (LBB) concept to pipeline design in nuclear power plants. Because of its importance, several programs were developed based on the several...
2016 / Jai Hak Park, Jin Ho Lee, Young-Jin Oh -
Phenomena of Stability Loss of Rotor Rotation at Tilting Pad Bearings
Abstract It is experimentally observed and studied the phenomena of stability loss of rotor rotation in tilting pad bearings of different designs. The trends of changing by stability limiting rotational speed of rotor depending on its unbalance and...
2012 / V. Gadyaka, D. Leikykh, V. Simonovskiy -
Burning Behaviour of High-Pressure CH4-H2-Air Mixtures2013 / Vincenzo Moccia, Jacopo D'Alessio