Mechanical engineering topic list of research papers
-
Experimental and computational investigation of adsorption performance of TC-5A and PSA-5A for manned spacecraft
Abstract Two kinds of molecular sieve materials, TC-5A and PSA-5A, were produced to satisfy with special requirement of manned space flight. Their CO2 adsorption performances were investigated and compared through two experiments, the thermo...
2015 / Meng Liu, Dongsheng Yang, Liping Pang, Qingni Yu, Yong Huang -
A Common Coordinates/Heading Direction Generation Method for a Robot Swarm with Only RSSI-Based Ranging2009 / Shinsuke Hara, Tatsuya Ishimoto, Masaya Kitano, Tetsuo Tsujioka
-
Cauchy Six-Dimensional Formalism for Lamb Waves in Multilayered Plates2013 / Sergey V. Kuznetsov
-
Robust Design in Multibody Dynamics – Application to Vehicle Ride-comfort Optimization
Abstract This research is devoted to the robust design of multibody dynamical systems, that is to say to the optimal design of a multibody system which is carried out using an uncertain computational model. The probabilistic model of uncertainties...
2015 / Anas Batou, Christian Soize, Chan Kyu Choi, Hong Hee Yoo -
Analysis of the Influence of Pedestrians’ eye Contact on Drivers’ Comfort Boundary During the Crossing Conflict
Abstract More and more people, especially young people, use their cellphones or earphones while crossing roads. Many research have confirmed the power of eye contact in normal life, in this study, we want to figure out how pedestrians’ stare...
2016 / Zeheng Ren, Xiaobei Jiang, Wuhong Wang -
Constraints on the applicability range of pressure-sensitive yield/failure criteria: strong orthotropy or transverse isotropy2016 / Jacek Skrzypek, Artur Ganczarski
-
Investigation into the effect of common factors on rolling resistance of belt conveyor2015 / L. Yan, L. Fu-Yan, Y. Xin-Bo
-
Simple method to the dynamic modeling of industrial robot subject to constraint2016 / J. Liu, R. Liu
-
A Fault Diagnosis Approach for Gears Based on IMF AR Model and SVM2008 / Junsheng Cheng, Dejie Yu, Yu Yang
-
Integrating Analysis and Design in Mechanical Engineering Education
Abstract Mechanical engineering (ME) departments in research universities face the challenge of educating mechanical engineers who will graduate with a balanced knowledge in engineering science and mechanical design. The source of this challenge is...
2015 / Reuven Katz -
Tribological Effects of Mineral-Oil Lubricant Contamination with Biofuels: A Pin-on-Disk Tribometry and Wear Study2011 / S. M. Shanta, G. J. Molina, V. Soloiu
-
Analysis of Non-linear Machine Tool Dynamic Behavior
Abstract This paper presents a Finite Element Analysis (FEA) of a high speed spindle with variable bearing preload. ANSYS and SpindlePro were used to simulate the spindle model. The effect of preload on stiffness and frequency response function...
2013 / A.S. Delgado, E. Ozturk, N. Sims -
Product Remanufacturability Assessment and Implementation Based on Design Features
Abstract The design of a product can have substantial and significant impact on the decision-making processes across a product's life-cycle as well as its remanufacturability. A product CAD model provides a rich and useful source of information for...
2015 / H.C. Fang, S.K. Ong, A.Y.C. Nee -
A Direct Approach Based on C2-IULOWA Operator for Group Decision Making with Uncertain Additive Linguistic Preference Relations2013 / Ding-Hong Peng, Zhi-Fang Gao, Chang-Yuan Gao, Hua Wang
-
Static and Dynamic Analysis of Railway Reinforced System with Cross-Beams2014 / Bin Peng, Nan Zhang, Yu Lan Gao
-
Numerical optimization of heat exchangers with circular and non-circular shapes
Abstract A circular tube bundle is one of the simplest geometries that is widely used for heat transfer applications. However, in the recent years, cross-flow heat exchangers with non-circular tube arrangement have been receiving increased...
2015 / Najla El Gharbi, Abdelhamid Kheiri, Momammed El Ganaoui, Ryan Blanchard -
A Preliminary Study on the 2-axis Hybrid Solar Tracking Method for the Smart Photovoltaic Blind
Abstract This study aimed to investigate a tracking system applicable to the SPB and determined an indirect tracking method. The slope of PV panel tracked the sun from 0° to 90°, which does not restrict the tracking. On the other hand, the azimuth...
2016 / Taehoon Hong, Kwangbok Jeong, Cheolwoo Ban, Jaeyoung Oh, Choongwan Koo, et al. -
Simulation and experimental investigation of the wavy fin-and-tube intercooler
Abstract In this paper, flow and heat transfer characteristics in the fin-and-tube intercooler were numerically investigated using the FLUENT software by adopting the porous medium approach, which could obtain the distributions, including...
2016 / Qinguo Zhang, Sicheng Qin, Runda Ma -
Monitoring Single-point Dressers Using Fuzzy Models
Abstract Grinding causes progressive dulling and glazing of the grinding wheel grains and clogging of the voids on the wheel's surface with ground metal dust particles, which gradually increases the grinding forces. The condition of the grains at...
2015 / H.I. Miranda, C.A. Rocha, P. Oliveira, C. Martins, P.R. Aguiar, et al. -
TRAFFIC AND TRANSPORTATION DIVISION, BUILDING AND ROAD RESEARCH INSTITUTE2014 / George BEY